TECHNET Archives

June 1997

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Received:
by ipc.org (Smail3.1.28.1 #2) id m0wZzLw-000BjJC; Fri, 6 Jun 97 08:46 CDT
Content-Type:
text/plain; charset=US-ASCII
Old-Return-Path:
<[log in to unmask]>
Date:
Fri, 6 Jun 1997 08:52:57 -0500
Precedence:
list
Resent-From:
[log in to unmask]
Message-ID:
<[log in to unmask]>
Content-Transfer-Encoding:
7bit
Status:
O
X-Mailing-List:
<[log in to unmask]> archive/latest/13201
>From willli Fri Jun 6 08:
47:13 1997
From [log in to unmask] Fri Jun 6 09:
02:55 1997
TO:
[log in to unmask]
Return-Path:
<TechNet-request>
X-Status:
Content-Description:
cc:Mail note part
Subject:
double sided reflow-soldering top side to bottom side parts.
From:
[log in to unmask] (Aric J Parr)
X-Loop:
[log in to unmask]
Mime-Version:
1.0
Resent-Message-ID:
<"N3lWY2.0.93L.BJ1cp"@ipc>
Resent-Sender:
TechNet-request [log in to unmask]
Parts/Attachments:
text/plain (32 lines) 
     
     I have an application where I need to reflow solder a part on the top 
     side of a double sided SMD board through the board to a bottom side 
     component without plating the hole. 
     
     This part is large and is placed within a slot in the panel. It must 
     physically touch the part on the bottom side.
     
     Does anyone have any suggestions on screen printing this,
     
     The stencil aperture will not contact the PCB surface where I need to 
     put the paste, but will be over a slot in the PCB.
     
     
     Thanks for any help,
     
     
     
     Aric
     

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
* with <subject: subscribe/unsubscribe> and no text in the body.          *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************

ATOM RSS1 RSS2