Subject: | |
From: | |
Reply To: | |
Date: | Thu, 12 Jul 2007 17:41:01 +0300 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
In that case use "no-clean" for both and don't clean.
Brian
Roberts, Jon wrote:
> Comment, we use have several assemblies (CCAs) that stranded jumper
> wires (usually 26 AWG) are used on so water soluble fluxes (QA) can not
> be used during any of our processes. We due use the AIM NC 264, Jon
>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]] On Behalf Of Brian Ellis
> Sent: Thursday, July 12, 2007 6:43 AM
> To: [log in to unmask]
> Subject: Re: [TN] No Clean flux residue after water wash
>
> I don't know how many times it has been said here that a so-called
> "no-clean" flux is formulated primarily so that the residues are as
> benign as possible WITHOUT any cleaning process. If you choose to clean
> them, the residues may be much less benign. Fluxes that are designed to
> be cleaned are formulated to ensure the cleaning process is as easy as
> possible. I do not advise mixing types on any one assembly because you
> are negating that advantages of both. The easiest way round your problem
>
> is to use a water-soluble flux for wave soldering (and reduce your
> retouch rate at the same time!)
>
> Brian
>
> Tom P. Hummel wrote:
>> Fellow TechNetters,
>>
>>
>>
>> We are experiencing a white residue on the solder side of some boards
>> after going through our wash system. We are wave soldering the boards
>> on a SeHo wave solder machine using Aim NC-264-5 no clean flux. The
>> boards have some additional components installed by hand using water
>> soluble flux/solder. The boards are then run through our Aqueous
>> Technologies SMT series board washer. When they complete the drying
>> cycle, there is a white residue on the solder side of the boards that
> is
>> very difficult to remove. Has anyone else seen this residue from
>> washing a board after using no clean flux? Does anyone have any
>> recommendations to help eliminate the residue?
>>
>>
>>
>>
>>
>> Thomas P. Hummel
>>
>> Carlton Industries Corp
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> ---------------------------------------------------
>> Technet Mail List provided as a service by IPC using LISTSERV 15.0
>> To unsubscribe, send a message to [log in to unmask] with following text
> in
>> the BODY (NOT the subject field): SIGNOFF Technet
>> To temporarily halt or (re-start) delivery of Technet send e-mail to
> [log in to unmask]: SET Technet NOMAIL or (MAIL)
>> To receive ONE mailing per day of all the posts: send e-mail to
> [log in to unmask]: SET Technet Digest
>> Search the archives of previous posts at:
> http://listserv.ipc.org/archives
>> Please visit IPC web site
> http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
> information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
> ext.2815
>> -----------------------------------------------------
>>
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 15.0
> To unsubscribe, send a message to [log in to unmask] with following text
> in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to
> [log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to
> [log in to unmask]: SET Technet Digest
> Search the archives of previous posts at:
> http://listserv.ipc.org/archives
> Please visit IPC web site
> http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
> information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
> ext.2815
> -----------------------------------------------------
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 15.0
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
> Search the archives of previous posts at: http://listserv.ipc.org/archives
> Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
> -----------------------------------------------------
>
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|