Mime-Version: |
1.0 |
Content-Type: |
text/plain; charset="us-ascii" |
Old-Return-Path: |
|
Date: |
Thu, 24 Jul 1997 15:42:14 -0700 |
Precedence: |
list |
From [log in to unmask] Mon Jul 28 09: |
39:22 1997 |
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
X-Sender: |
wlmx431@hagar |
TO: |
|
Return-Path: |
<TechNet-request> |
>From willli Thu Jul 24 15: |
30:30 1997 |
X-Loop: |
|
Resent-Message-ID: |
<"gbW0w1.0.fe7.Gjxrp"@ipc> |
Subject: |
|
From: |
|
Resent-From: |
|
Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0wrUWX-000BjrC; Thu, 24 Jul 97 15:30 CDT |
X-Mailer: |
Windows Eudora Light Version 1.5.4 (32) |
Message-Id: |
|
Parts/Attachments: |
|
|
Was is class at The Copper Connecton in San Jose where saw a video of an
occurance of the growth of metal across a narrow space conductor to
conductor with out solder mask coverage in an environment with elevated
humidity.
check your circumstances--this was an amazing video---actually saw growth.
At 06:28 PM 7/24/97 +0500, B.R.SHASHIRAJ wrote:
>Hello Technetters,
> Can some one out their throw some light on below mentioned problem
>,probable causes and solutions.
> 1. this defect noticed on 1.6mm double sided board, smobc,hal finish.
> 2. after assembly and while testing at elevated temperature noticed
> shorts during test cycle on the solder side between connector pads and trace
>running thro.
> 3.unable to figure out ,this shorts appear of very little dimension and
>are very small compared to pad /trace.
>
> can some one figure what this cud be and why
> THANKS.
>
>BYE.
>
>
>***************************************************************************
>* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
>***************************************************************************
>* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
>* with <subject: subscribe/unsubscribe> and no text in the body. *
>***************************************************************************
>* If you are having a problem with the IPC TechNet forum please contact *
>* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
>***************************************************************************
>
>
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|