TECHNET Archives

June 2000

TechNet@IPC.ORG
Options: Use Monospaced Font
Show HTML Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
SMT Reels Issues.
From:
Monica Mihai <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Mon, 26 Jun 2000 19:06:39 -0400
Content-Type:
multipart/alternative
Parts/Attachments:
text/plain (566 bytes) , text/html (1393 bytes) 
Hello Technet,

I need some advice from the SMT experts. The issue is around the placement
of wrong SMT reel components on boards due to vendor or process issues
(errors in labelling, parenting the reel to the wrong feeder, etc). Any
suggestions on best practices for incoming material quality processes and/or
suggestions on the most effective ways to verify that the right components
have been placed on the line before populating the boards?

Thank you!
Monica Mihai
Process Engineering
Nortel Enterprise Solutions
Tel.: (403) 735 - 5488 (ESN 775)
Fax: (403) 291 - 7488 (ESN 775)

ATOM RSS1 RSS2