TECHNET Archives

April 1997

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Received:
by ipc.org (Smail3.1.28.1 #2) id m0wK8Bd-000Bj9C; Wed, 23 Apr 97 14:58 CDT
Old-Return-Path:
<[log in to unmask]>
Date:
Wed, 23 Apr 1997 14:46:26 -0400 (EDT)
Precedence:
list
Resent-From:
[log in to unmask]
Message-ID:
<[log in to unmask]>
X-Status:
Status:
O
X-Mailing-List:
<[log in to unmask]> archive/latest/12164
TO:
[log in to unmask]
Return-Path:
<TechNet-request>
Resent-Message-ID:
<"6wc0y1.0.D-O.kdcNp"@ipc>
Subject:
Re: FAB: HASL Finish
From:
[log in to unmask]
From [log in to unmask] Tue Apr 29 08:
35:18 1997
X-Loop:
[log in to unmask]
Resent-Sender:
TechNet-request [log in to unmask]
Parts/Attachments:
text/plain (23 lines) 
Hello

You might need to try the SERA technique/QC-100 Surface tester. I was
specifically developed for the analysis of the PCB surfaces (pads and through
holes). The technique can identify the surface species and measure the amount
of them. 

If you need more info, talk to ECI Technology guys. The phone is (201)
773-8686. 
E-mail: [log in to unmask]

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
* with <subject: subscribe/unsubscribe> and no text in the body.          *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************

ATOM RSS1 RSS2