Steve, et.al.,
I should have been more specific in my comments regarding flying probes. It was geared towards board assemblies. I have used flying probe on bare boards and as Sona says below it is a good tool for that application.
Rick
-----Original Message-----
From: Fineline Circuits, Inc. [mailto:[log in to unmask]]
Sent: Saturday, October 19, 2002 4:51 PM
To: [log in to unmask]
Subject: Re: [TN] Flying Probe Testers...
Steve:
We have had Probot's Flying Probe Tester QC-2000 for the last 2+ years and are pleased with the machine. The tester is great for prototype and small production runs. Machine is user friendly and requires low maintenance. Netlist test data is generated from the customer's gerbers.
Testing does take much longer than other fixture testing and initially we found them very slow but for fine pitch smt multilayers they have worked out good for us.
However since the merger with Mania the service needs to be much improved.
Sona Sitapara
Fineline Circuits Inc.
----- Original Message -----
From: Steve Gregory <mailto:[log in to unmask]>
To: [log in to unmask] <mailto:[log in to unmask]>
Sent: Friday, October 18, 2002 11:11 AM
Subject: [TN] Flying Probe Testers...
Hi All!
Our company is looking at Flying Probe testers, and I told our test engineer I would post to the list and ask ya'll if anyone has experience and an opinion (good or bad), of some of the makes out there...
Our test engineer went and looked at two of them this past week (Takaya and Spea), and between the two, he's leaning toward the Spea. He said the reason he was leaning towards the Spea, is that you have to give the Takaya a known good board first, and to him (and me), that kinda defeats the whole concept about flying probe testers.
Any feedback anyone can share will be most kindly appreciated
-Steve Gregory- --------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8e To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 -----------------------------------------------------
--------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8e To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 -----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------
|
