What a jolly good Q !

HS 50's are still bit rare (not that the heads would change that much);
anyhow :

Donn; you may see interesting difference on blackplate if you do it with
your standard components ;
or if manufacturers engineer will perform this test for you .

What I found ; they usually come with their own ; very much selected
(say)1206's ;
which in the end look on the plate as cute as your bathroom wall ;
trouble is; as soon as you start to place your 805's overmetalised caps it
will resemble more pebbled concrete !
So pull your worst part and tile with that ; to get most out of it .

Paul Klasek
ResMed

-----Original Message-----
From: Steffen, Don E [mailto:[log in to unmask]]
Sent: Friday, 3 September 1999 4:59
To: [log in to unmask]
Subject: [TN] PROCESS CAPABILITY AND REPEATABILITY STUDY


HELLO TECH NO'S

I AM A QUALITY ENG AND I AM GETTING READY TO RUN OFF AND ACCEPT A SIEMENS
MODEL HS-50 PICK N PLACE SMD MACHINE. I AM GOING TO PERFORM THE BLACK PLATE
FOR ACCURACY AND PROCESS CAPABILITY. DOES ANY ONE OUT THERE WHO HAS THIS
MACHINE IN THEIR FACILITIES AND WHAT ADDITIONAL HELP CAN YOU GIVE ME? PLEASE
GET BACK WITH ME AS SOON AS POSSIBLE.

THANKS

DONN STEFFEN
SQE/VDO CONTROL SYS
AUBURN, IN

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################