TECHNET Archives

1995

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Received:
by ipchq.com (Smail3.1.28.1 #2) id m0t5GKC-0000HWC; Tue, 17 Oct 95 13:01 CDT
Sender:
"TOM HYBISKE" <[log in to unmask]>
Old-Return-Path:
<[log in to unmask]> <miso!gac.usa.com!HYBISKE>
Date:
Tue, 17 Oct 1995 13:38:35
Precedence:
list
Resent-From:
Resent-Sender:
X-Status:
Status:
O
X-Mailing-List:
<[log in to unmask]> archive/latest/1389
From [log in to unmask] Sat Apr 27 15:
05:43 1996
TO:
Return-Path:
Resent-Message-ID:
<"GWKrJ3.0.GtC.1z-Wm"@ipc>
Subject:
From:
"TOM HYBISKE" <[log in to unmask]>
X-Loop:
X-mhsfile:
ANDBAFAD
Message-Id:
Parts/Attachments:
text/plain (48 lines)
Kevin Thorson asked a question regarding the removal of non-
functional pads.  Below is the response I received from Gary Ferrari
(Chairperson of the IPC Printed Circuit Board Committee) when I asked 
the same question recently.  What I found was that most board 
fabricators prefer the removal of non-functional pads.  If you look 
at the wording of both specs, they create a loophole of sorts by 
using words such as "should be included" and "may be included".  We 
now have a note on our fab drawings making the removal of non-
functional pads an option for our fabricators. 


Tom Hybiske
General Atronics Corp.



To:             mail@ih [log in to unmask]
Date sent:      27-Jun-95 10:52:40 -0400
From:           mail@ih [log in to unmask]
Subject:        Re: Removal of non-functional...


The IPC conducted a Small Hole Round Robin test program a few years ago. The
number of the resulting report is IPC-TR-579.

In this report, it was noted that with certain aspect ratio holes, the
barrels failed in the resin rich areas. This indicates that non-functional
lands should be kept in the construction, for some types of holes. These
results led us to recommend that non-functional lands be kept on inner
layers, in the IPC-D-275 (1991). We also noted that with high layer counts
that it is desireable to remove some of the lands to reduce the compression
effect, during lamination.

Board fabricators like the removal of the lands, since it reduces the
opportunity for defects on the inner layers. However, the long term
reliability of the product should overide any decision about removal of inner
layer non-functional lands.

If you contact the IPC office, they can provide you with a copy of the
report.

Regards,

Gary Ferrari




ATOM RSS1 RSS2