TECHNET Archives

January 2001

TechNet@IPC.ORG
Options: Use Monospaced Font
Show HTML Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Circumfrential Voids
From:
Sandy Kumar <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Thu, 25 Jan 2001 16:18:57 -0600
Content-Type:
multipart/alternative
Parts/Attachments:
text/plain (617 bytes) , text/html (1289 bytes) 
I am looking for information on the possible causes of circumfrential voids (occuring inside the hole barrel), that I am seeing in the cross sections of multilayer FR4 boards with 10 mil holes with aspect ratio of 10. After drilling, these boards go through Blackhole graphitic carbon / Cu flash / image / Cu pattern plate with Sn as etch resist / strip dry film, etch Cu and strip the Sn/ LPI and HAL.

I would like to find out the cause for these voids. I deeply appreciate any valuable advice on how to fix this problem.
 
Thanks.
Sandy 
email: [log in to unmask]
phone: 847-290-9800, ext. 45
fax: 847-290-9823

ATOM RSS1 RSS2