TECHNET Archives

February 2006

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Sender:
X-To:
IPC Tech Net <[log in to unmask]>
Date:
Wed, 1 Feb 2006 11:19:23 -0700
Reply-To:
TechNet E-Mail Forum <[log in to unmask]>, Scott Decker <[log in to unmask]>
Subject:
MIME-Version:
1.0
Content-Transfer-Encoding:
7bit
Content-Type:
text/plain; charset="us-ascii"
From:
Scott Decker <[log in to unmask]>
Parts/Attachments:
text/plain (29 lines)
Hi all, Been some time since I posted here. Anyway, I'm wondering if
anyone here has fanned out a BGA with more than 1 trace from a ball pad?
What I have done is group several pads to each other and to vias which
makes a pattern like a number 5 on a dice in order to make room under
the board for pads on caps. I don't have the option for blind or buried
vias and I'm looking at a .010" drilled via in a .094" thick board. My
concern is not a noise problem, (the engineer is the one wanting the
caps and grounds like I have them) but more of an assembly concern. Will
the multiple traces from the pads cause a reflow problem when installing
the BGA? Any ideas or help would be great on this.
Thanks.


Scott Decker
AKA: Padmasterson
Broad Reach Engineering CAE
Tempe, AZ.


---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2