Subject: | |
From: | |
Reply To: | |
Date: | Thu, 20 Jan 2005 14:32:58 -0800 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Scott,
The approach you describe is lower risk application for Silver
contact. The contact only has electrical bias applied at the moment of
switch contact.
dw
At 11:56 AM 1/20/2005, Roger Stoops wrote:
>Scott,
>
>On some of our products we built some years ago we used carbon as an
>alternate for Au for LCD and switch contacts. We had no reported
>problems, either from assembly or the end-user.
>
>Dwight made a good point in his email. Interesting side point to his
>comments: when we needed to build our own keypad, the contact layer was
>silver on mylar sealed to a pcb with PSA adhesive (pcb contacts were
>ENIG). Even though there were no apparent openings and no vents, to our
>dismay the contacts oxidized rather quickly (found sulfur and moisture in
>enclosed areas). The vendor suggested a thin layer of carbon ink over the
>silver. Worked like a charm. You may find it helpful to find out what
>ink your vendor is using and specify it on your print.
>
>Question for anyone: Has anyone used IAg as a board finish with carbon ink
>over any desired areas? Seems like it might work for a keypad with parts
>on one side and contacts on the other...
>
>Rgds,
>
>Roger
>
>
>-----Original Message-----
>From: TechNet [mailto:[log in to unmask]]On Behalf Of Scott Lefebvre
>Sent: Thursday, January 20, 2005 2:37 PM
>To: [log in to unmask]
>Subject: [TN] Carbon Keypad
>
>
>Currently we use gold for all of our keypads. I want to reduce the cost
>of a product and thought about switching to a carbon keypad. I am not
>familiar with the process and wanted to know a few things. We mostly use
>a water-soluble process and our entire product is washed. Some boards are
>a mixed technology using SnPb currently.
>
>? Are there any Reflow solder concerns I should be aware of?
>? Are there any Wave solder concerns I should be aware of, like masking
>pads during wave solder?
>? Are there any other concerns period that I should be addressing.
>
>Thank you,
>
>Scott
>
>
>
>
>
>
>---------------------------------------------------
>Technet Mail List provided as a service by IPC using LISTSERV 1.8e
>To unsubscribe, send a message to [log in to unmask] with following text in
>the BODY (NOT the subject field): SIGNOFF Technet
>To temporarily halt or (re-start) delivery of Technet send e-mail to
>[log in to unmask]: SET Technet NOMAIL or (MAIL)
>To receive ONE mailing per day of all the posts: send e-mail to
>[log in to unmask]: SET Technet Digest
>Search the archives of previous posts at: http://listserv.ipc.org/archives
>Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
>for additional information, or contact Keach Sasamori at [log in to unmask] or
>847-615-7100 ext.2815
>-----------------------------------------------------
>
>---------------------------------------------------
>Technet Mail List provided as a service by IPC using LISTSERV 1.8e
>To unsubscribe, send a message to [log in to unmask] with following text in
>the BODY (NOT the subject field): SIGNOFF Technet
>To temporarily halt or (re-start) delivery of Technet send e-mail to
>[log in to unmask]: SET Technet NOMAIL or (MAIL)
>To receive ONE mailing per day of all the posts: send e-mail to
>[log in to unmask]: SET Technet Digest
>Search the archives of previous posts at: http://listserv.ipc.org/archives
>Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
>for additional information, or contact Keach Sasamori at [log in to unmask] or
>847-615-7100 ext.2815
>-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|