TECHNET Archives

February 1999

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Sender:
TechNet <[log in to unmask]>
X-To:
Ken Patel <[log in to unmask]>
Date:
Wed, 17 Feb 1999 15:11:38 -0500
Reply-To:
"TechNet E-Mail Forum." <[log in to unmask]>, Dave Hoover <[log in to unmask]>
Content-type:
text/plain; charset="US-ASCII"
Subject:
Re: Hole Chart v/s Drill chart on fab drawings
From:
Dave Hoover <[log in to unmask]>
Content-transfer-encoding:
7BIT
In-Reply-To:
<F379573B018DCED1>
Organization:
McCurdy Circuits
MIME-Version:
1.0
Parts/Attachments:
text/plain (23 lines) 
Hole Chart would be advisable for on drawings. Drill Chart suggests what
size to be
drilled. A hole chart suggests what you want on the finished product.
Each fabricator
may use a slightly different drilled hole size to achieve the finished
hole size.

Just thoughts....

Groovy

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################

ATOM RSS1 RSS2