TECHNET Archives

May 1997

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Received:
by ipc.org (Smail3.1.28.1 #2) id m0wSRgF-000Bj1C; Fri, 16 May 97 13:24 CDT
Encoding:
7 TEXT
>From bergdi Fri May 16 13:
25:01 1997
Old-Return-Path:
<[log in to unmask]>
Date:
Fri, 16 May 97 17:32:00 GMT
Precedence:
list
Resent-From:
[log in to unmask]
Message-ID:
<[log in to unmask]>
X-Status:
Status:
O
X-Mailing-List:
<[log in to unmask]> archive/latest/12781
TO:
IPC TechNet <[log in to unmask]>
Return-Path:
<TechNet-request>
From [log in to unmask] Mon May 19 10:
18:37 1997
Resent-Message-ID:
<"J10br.0.G4B.cPAVp"@ipc>
Subject:
Component breaking off on Cab Maestro 4M
From:
"Dhawan, Ashok CA-WINPO2" <[log in to unmask]>
X-Loop:
[log in to unmask]
X-Mailer:
Microsoft Mail V3.0
Resent-Sender:
TechNet-request [log in to unmask]
Parts/Attachments:
text/plain (19 lines) 

Anybody using Maestro 4M  pcb cutter and having component breaking off 
 especially in proximity to the edge of the board. I will appreciate sharing 
experience on this.

ashok dhawan
[log in to unmask]

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
* with <subject: subscribe/unsubscribe> and no text in the body.          *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************

ATOM RSS1 RSS2