X-URL: |
http://www.ipc.org/html/framesetassemtypes.html |
Content-Type: |
text/plain; charset=iso-8859-1 |
Old-Return-Path: |
|
Date: |
Mon, 03 Feb 1997 20:34:03 -0800 |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
From [log in to unmask] Wed Feb 5 08: |
48:22 1997 |
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
X-Status: |
|
X-Loop: |
|
X-MIME-Autoconverted: |
from 8bit to quoted-printable by mail.accent.net id UAA02187 |
Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0vraaM-0000V1C; Mon, 3 Feb 97 20:26 CST |
Resent-Message-ID: |
<"ms8bu1.0.C_M.5vfzo"@ipc> |
Subject: |
|
From: |
|
Content-Transfer-Encoding: |
quoted-printable |
MIME-Version: |
1.0 |
X-Mailer: |
Mozilla 2.02Gold (Win95; I) |
Message-ID: |
|
Parts/Attachments: |
|
|
We are a telecommunication equipment manufacturer (OEM) and we wave solder all are boards assemblies. On almost all our PCB Assemblies we
used small value ( 2pF, 6.8pF, 27pF, 39pF etc...) ceramic 50volts capacitors. When we wave our boards, we have to process our boards at a
conveyor speed greater than 4 feet/min. with a dwell time below 2.3 seconds or we are in a lot of trouble. If we attemp to solder with a
greater dwell time, the value of the capacitors changes sometimes by as much as 25% ( a 39pF becomes a 30pF after wave). We happened to
have difficult to solder boards and it would help if we could increased the dwell time. The solder pot temperature is at 480°F.
Now is there someone who knows a solution to that problem or is there someome who experience the same kind of problem?
I certainly would appreciate any suggestion.
Alain MAthieu
Technical Specialist
Thanks in advance.
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|