"NOTE: The information in this e-mail is confidential and may be legally privileged. If you are not the intended recipient please notify the sender immediately and then delete  this  e-mail. You must not read, copy, use or disseminate this e-mail or any  information in it .  Although this e-mail and any attachments are believed to be free of any virus or other defects which might affect any computer or IT system into which they are received, no responsibility is accepted by Laporte plc or any of its associated companies for any loss or damage arising in any way from the receipt or use thereof. Any opinions expressed in this e-mail or any attachments are those of the individual sender and not necessarily the Company."
"

Leo,

The last document I received with relationship to the above listed the
following as acceptable values:

        Ra              0.2-0.3 microns
        Rz              1.8-3.0 microns

Thanks,

Mike Carano

        -----Original Message-----
        From:   [log in to unmask] [SMTP:[log in to unmask]]
        Sent:   Friday, May 26, 2000 1:49 PM
        To:     [log in to unmask]
        Subject:        [TN] Ra and Rz values

        Can someone please proivde the range of acceptable Ra and Rz values
for dry
        film adhesion?

        Thanks

        Leo Roos

        ##############################################################
        TechNet Mail List provided as a free service by IPC using LISTSERV
1.8c
        ##############################################################
        To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in
        the body:
        To subscribe:   SUBSCRIBE TECHNET <your full name>
        To unsubscribe:   SIGNOFF TECHNET
        ##############################################################
        Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional
        information.
        If you need assistance - contact Keach Sasamori at [log in to unmask] or
        847-509-9700 ext.5315
        ##############################################################

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################