TECHNET Archives

February 2000

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Sender:
X-To:
Bob Dube <[log in to unmask]>
Date:
Wed, 9 Feb 2000 13:30:03 -0800
Reply-To:
"TechNet E-Mail Forum." <[log in to unmask]>, Chuck Brummer <[log in to unmask]>
Subject:
From:
Chuck Brummer <[log in to unmask]>
Content-Transfer-Encoding:
7bit
Content-Type:
text/plain; charset=us-ascii
Organization:
acuson
MIME-Version:
1.0
Parts/Attachments:
text/plain (86 lines)
Bob gets my vote for best possibility.  Moisture, residual or added by an operator, is
the best possible answer for on large delamination.

Is there a ground plane behind the blister?  Sometimes just a whole lotta heat in one
place can cause a failure too.

Chuck Brummer
Acuson

Bob Dube wrote:

> Sounds like residual moisture or some other volatile in the board.
>
> Bob Dube
>
> -----Original Message-----
> From: Stephen R. Gregory <[log in to unmask]>
> To: [log in to unmask] <[log in to unmask]>
> Date: Wednesday, February 09, 2000 12:15 PM
> Subject: [TN] Delamination
>
> >Hi ya'll!
> >
> >We just finished building a lot of 48-boards through SMT. Out of that 48
> >there was one board that we just discovered a big delamination blister on
> the
> >backside...it's about 1.5" wide and maybe 2.5 - 3" long. There was no
> rework
> >done on the board, and it was reflowed under the same profile in a
> >Conceptronic HVA-70 that the rest of them were...and they don't exhibit any
> >problems. There no sign of overheating at all around the blister, and the
> >silkscreen is nice and bright white...we just have this big blister. What
> >might cause that? The boards are polyimide. We didn't bake them, and they
> >were real fresh boards date code was 0300. Like I said, it was the only
> board
> >that had a problem...the rest are fine.
> >
> >TIA
> >
> >-Steve Gregory-
> >
> >##############################################################
> >TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
> >##############################################################
> >To subscribe/unsubscribe, send a message to [log in to unmask] with following
> text in
> >the body:
> >To subscribe:   SUBSCRIBE TECHNET <your full name>
> >To unsubscribe:   SIGNOFF TECHNET
> >##############################################################
> >Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
> additional
> >information.
> >If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
> >847-509-9700 ext.5365
> >##############################################################
> >
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
> the body:
> To subscribe:   SUBSCRIBE TECHNET <your full name>
> To unsubscribe:   SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
> information.
> If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
> 847-509-9700 ext.5365
> ##############################################################

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################

ATOM RSS1 RSS2