 
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0w8BxP-000BByC; Fri, 21 Mar 97 15:34 CST |
| Content-Type: |
TEXT/PLAIN; CHARSET=US-ASCII |
| Old-Return-Path: |
|
| Date: |
Fri, 21 Mar 1997 13:43:56 -0800 |
| Precedence: |
list |
| Reply-To: |
|
| cc: |
|
| MIME-Version: |
1.0 |
| Status: |
O |
| Priority: |
Normal |
| TO: |
|
| From [log in to unmask] Fri Mar 21 17: |
22:20 1997 |
| Return-Path: |
<TechNet-request> |
| X-Status: |
|
| X-Loop: |
|
| Resent-Message-ID: |
<"BvAib1.0.hZ7.kxlCp"@ipc> |
| Subject: |
|
| From: |
|
| X-Mailing-List: |
|
| Resent-From: |
|
| Resent-Sender: |
|
| Message-Id: |
|
| Parts/Attachments: |
|
|
Sid: Contact Fluke Corp. 1-800-44 FLUKE. They have an 80i series of
amp clamps; the 410 and the 1010 will measure up 400 and 1000 amps
respectively for either AC or DC current. These are designed to be used in
conjunction with a variety of Fluke DMM's. The model 867 DMM will do
everything your after plus a whole lot more.
We use the 80i-1010 with a lower cost 20 series DMM which doesn't
have the monitor/record/down load functions but works fine as a process check
and trouble shooting tool.This allows us to check not only electoplate rack
connections but also rectifier output at the source and tank,up to 1000 amps.
Bye the way this is not an advertisement we don't get ours for free we have
to buy them.
Regards
Michael Barmuta
Staff Engineer
Fluke Corp.
Everett Wa.
(206)356-6076
On Fri, 21 Mar 1997 10:09:47 -0800 Sid Tryzbiak wrote:
> From: Sid Tryzbiak <[log in to unmask]>
> Date: Fri, 21 Mar 1997 10:09:47 -0800
> Subject: Unidentified subject!
> To: [log in to unmask]
>
> I am looking for an amp probe to measure DC current up to 200 amps. This
> will be used to verify that the copper plating racks are making good
> connections. This amp probe needs capability to hold many readings in
> memory and be able to download the data to a PC for later analysis.
>
> Does anyone know where I can get an amp probe with memory and an RS-232
> port?
>
>
>
> Thanks,
>
>
> Sid Tryzbiak
> VP Engineering
> Continental Circuits, Inc.
> 407-699-5000
>
> ***************************************************************************
> * TechNet mail list is provided as a service by IPC using SmartList v3.05 *
> ***************************************************************************
> * To subscribe/unsubscribe send a message <to: [log in to unmask]> *
> * with <subject: subscribe/unsubscribe> and no text in the body. *
> ***************************************************************************
> * If you are having a problem with the IPC TechNet forum please contact *
> * Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
> ***************************************************************************
>
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|
