Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Tue, 17 Nov 1998 07:57:38 -0800 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Greg,
We use counter sunk holes for both screws and rivets with no problems. We
do not plate them, just bare laminate. Don't know of any IPC references
though.
Hope that helps a little.
Ken Bloomquist
Sr. Principal Process Engineer
PRIMEX Aerospace Company
P.O. Box 97009
Redmond, WA 98073-9709
www.primextech.com
Ph: 425-885-5000
FAX: 425-882-5786
[log in to unmask]
Northcon/98, Show Director
<www.northcon.org>
Electronics Manufacturers Association (EMA), Secretary
<www.ema-wa.org>
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|