Terri,
I don't know if there is such a material, but what I have seen done in the
past is to use the plain transparency Mylar for this application and use the
anti-static wipes to eliminate the ESD potential.  It seems to me the
operators were required to wipe down the overlays/templates once every 4
hours, both sides.  It took care of any ESD concerns.  We verified that.  I
don't know how this compares cost-wise, as I was not involved in purchasing
the materials.

Wendy Reeves,
PEI Electronics, Inc.
ISO 9000/(CP)2 Coordinator
Quality Engineer
Direct Line: (256) 895-2251


> -----Original Message-----
> From: Houston, Terri [mailto:[log in to unmask]]
> Sent: Friday, August 11, 2000 6:10 AM
> To: [log in to unmask]
> Subject: [TN] ESD-safe transparency film
>
>
> Hi folks,
>   Does anyone have information on ESD-safe transparency
> material that could
> be used on the assembly floor? We're looking to provide our
> assemblers with
> templates to help ensure that components are placed
> correctly, and I assume
> that the standard material used for overhead presentations won't work.
>
> Thanks in advance,
> Terri
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using
> LISTSERV 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask]
> with following text in
> the body:
> To subscribe:   SUBSCRIBE TECHNET <your full name>
> To unsubscribe:   SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm)
> for additional
> information.
> If you need assistance - contact Keach Sasamori at [log in to unmask] or
> 847-509-9700 ext.5315
> ##############################################################
>

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################