TECHNET Archives

December 2003

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Sender:
X-To:
Date:
Tue, 16 Dec 2003 08:04:19 -0800
Reply-To:
"TechNet E-Mail Forum." <[log in to unmask]>, Sergey Ermolin <[log in to unmask]>
Subject:
MIME-Version:
1.0
Content-Transfer-Encoding:
quoted-printable
Content-Type:
text/plain; charset="us-ascii"
From:
Sergey Ermolin <[log in to unmask]>
Parts/Attachments:
text/plain (31 lines)
Hi.

I am desinging a multi-chip module. In my desing, two off-the-shelf IC's
in TQFP packages are mounted on an FR-4 PCB. This board has a Land Grid
Array footptint on the bottom and will be soldered to the motheboard
using a standard reflow process with Sn63Pb37 alloy. What alloy and
temperature profile would you recommend for assembling the multi-chip
module itself? The chips on the module were not designed to withstand
more than 230 deg C and are normally soldered using the same Sn63Pb37
alloy...

Thank you for your help...

Regards,

Sergey Ermolin
Dust, inc
2560 9th Street, #218
Berkeley, CA 94710
510/225-2137

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------

ATOM RSS1 RSS2