David
IMHO you should be looking at something better than a conductivity of 1
microsiemens-centimetre at all times.
Brian
> David Kim wrote:
>
> Hi all,
>
> I am looking for good purity range of DI water supplied to all rinse
> baths in the Electroless Ni / Immersion Au plating line.
> Right now, we use DI water under 125ppm. Is it enough?
> And when should DI water be changed after being used continuously?
> Does anyone have some information or idea about this?
>
> Thank you.
--
Brian Ellis
Protonique SA
PO Box 78
CH-1032 Romanel-sur-Lausanne, Switzerland
Voice: +41 21-648 23 34 Fax: +41 21-648 24 11
E-mail: [log in to unmask]
URL: Technical and consultancy divisions:
http://www.protonique.com
Web services division:
http://www.protonique.com/webserv
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################