Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Wed, 10 Nov 1999 15:01:50 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Tim ,
What IPC Standards are you implying any or all.
If you have IPC A-610
Please check page iv and v.
!. If the manufacture/assembly company does not have a documented PROCESS CONTROL SYSTEM.( customer approved, J-STD- 001 ) then all Nonconforming Process Indicators must be treated as " Nonconforming Defects.
Nonconforming Process Indicators are characters that should be used to improve the process as their occurrence signals a lack of good workmanship to the customer.
Nonconforming Proces Indicators can be included in a production shipment. However, since they reflect a lack of good workmanship, Poor material and poor design, they are undesirable from a customer /supplier relationship and understanding.
Nonconforming Process Indicators need to be corrected and addressed Please remember the key word is INDICATOR.
The word Defect is a different story
>>> Tim Devaul <[log in to unmask]> 11/10/99 01:08PM >>>
I am in the process of switching from my company's internally developed standards to IPC, the only outlying issue is how we are going to handle nonconforming process indicators as they arise. Could I get some feedback as to how your companies handle
them?
Thanks, Tim
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################
|
|
|