Subject: | |
From: | |
Reply To: | |
Date: | Thu, 28 Aug 2014 13:21:20 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
moly tap? you need epoxy filled with silver... my guess. make sure
you press down with pressure to make it a good contact upon glue it
down (silver flakes need to contact each other to form almost ohmic
contact).
jk
On Aug 28, 2014, at 9:14 AM, David Hillman wrote:
> Hi Jeff - sorry to be the bearer of bad news but Moly is classified
> as a
> "refractory" metal which are essentially impossible to get an
> acceptable
> solder joint. The best information I have in my library is in the AWS
> Soldering Handbook (ISBN 0-87171-618-6) Section 3.3.11. You need a
> intermediate solderable coating such as nickel or copper on the
> Moly and to
> get that layer adhered you need to clean the Moly surface with some
> pretty
> nasty etching materials (HF, NaOH) and processes (molten baths,
> boiling
> baths). Not something to causally try.
>
> Dave Hillman
> Rockwell Collins
> [log in to unmask]
>
>
> On Thu, Aug 28, 2014 at 5:56 AM, McGlaughlin, Jeffrey A <
> [log in to unmask]> wrote:
>
>> Any recommendations or warnings in trying to solder molybdenum
>> conductors
>> to a circuit card?
>>
>> TIA
>>
>> Jeffrey McGlaughlin, C.I.D.
>> Engineering Designer
>> Avionics Systems & Tech Refersh
>> Office: 614.424.7582| Fax: 614.458.7582
>> [log in to unmask]<mailto:[log in to unmask]>
>>
>> Battelle
>> 505 King Avenue
>> Columbus Ohio 43201-2693
>> http://www.battelle.org<http://www.battelle.org/>
>>
>> Connect with Battelle
>> Facebook<http://www.facebook.com/battelle> | LinkedIn<
>> http://www.linkedin.com/company/battelle>
>> Twitter<http://www.twitter.com/Battelle> | YouTube<
>> http://www.youtube.com/user/battelleinnovations>
>>
>> This message is intended only for the use of the individual or
>> entity to
>> which it is addressed, and may contain information that is
>> privileged,
>> confidential and/or otherwise exempt from disclosure under
>> applicable law.
>> If the reader of this message is not the intended recipient or the
>> employee
>> or agent responsible for delivering the message to the intended
>> recipient,
>> any disclosure, dissemination, distribution, copying or other use
>> of this
>> communication or its substance is prohibited. If you have received
>> this
>> communication in error, please return to the sender and delete
>> from your
>> computer system.
>>
>>
>>
>>
>> _____________________________________________________________________
>> _
>> This email has been scanned by the Symantec Email Security.cloud
>> service.
>> For more information please contact helpdesk at x2960 or
>> [log in to unmask]
>> _____________________________________________________________________
>> _
>>
>
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud
> service.
> For more information please contact helpdesk at x2960 or
> [log in to unmask]
> ______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|
|
|