Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Fri, 7 Apr 2000 13:26:00 +0100 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi Technetters,
I have a problem with cracked surface mount resistor network. The cracking
occurs after de-panelisation. I have confirmed this electrically and
visually (at up to x35 mag). The current fallout is about 5%. The board is
0..070" (1.8mm) thick and v-scored from both sides. De-panelisation is by
means of a "bacon slicer" (rolling v-shaped blade approx 4" diameter). The
network is located 0.032" (0.8mm) away from the v-groove.
_____________________________________________________ V-score edge
____________________
| / \
|
|____/ \____|
| |
____| |____
|
|
Resistor network with diagonal cracks from stress points
The question I have is: does anyone know of any guidelines with respect to
minimum component mounting distance away from the v-groove in a situation
like this?
Also, is there an algorithm anywhere that can be used to calculate stress
involved?
Thanks
Martin Christie
ACW Technology Ltd.,
Hylton Road,
Petersfield,
Hants.
GU32 3XX
Tel: 01730 300000 ext 146
Fax: 01730 266045
e-mail: [log in to unmask]
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################
|
|
|