Subject: | |
From: | |
Reply To: | (Combined Forum of D-33a and 7-31a Subcommittees) |
Date: | Wed, 12 Feb 2003 10:03:54 -0600 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Good One! :)
Best regards,
Renee Michalkiewicz
Laboratory Director
Trace Laboratories - East
5 North Park Drive
Hunt Valley, Maryland 21030
phone: 410-584-9099
Fax: 410-584-9117
[log in to unmask] <mailto:[log in to unmask]>
www.tracelabs.com/east <http://www.tracelabs.com/east>
Notice: This message is intended for the private use of the addressee. If
this e-mail transmission was sent to you in error, please notify the
originator.
-----Original Message-----
From: John Perry [mailto:[log in to unmask]]
Sent: Wednesday, February 12, 2003 11:07 AM
To: [log in to unmask]
Subject: Re: [IPC-600-6012] Zone Concept
Hi Debby,
Our Listserv forums do not allow for postings with attachments for
anti-viral purposes. I can have Susan send to me direct and then I can also
send to the forum members outside the "zone" of the forum. Sorry - I could
not resist there ;-)
John
IPC
-----Original Message-----
From: Obitz, Debora [mailto:[log in to unmask]]
Sent: Wednesday, February 12, 2003 9:52 AM
To: [log in to unmask]
Subject: Re: [IPC-600-6012] Zone Concept
Susan,
I did not receive the photo.
Debby
Trace Labs
-----Original Message-----
From: Susan Mansilla [mailto:[log in to unmask]]
Sent: Wednesday, February 12, 2003 11:48 AM
To: [log in to unmask]
Subject: Re: [IPC-600-6012] Zone Concept
The photo above - hopefully this will be accepted by the forum and not
stripped - presents a real problem and should be
considered by everyone when we decide where to draw that zone line. Using
the internals that extend the farthest plus
3 mils would allow complete voiding between layers 2 and the ground plane.
Susan
|
|
|