Good One! :) Best regards, Renee Michalkiewicz Laboratory Director Trace Laboratories - East 5 North Park Drive Hunt Valley, Maryland 21030 phone: 410-584-9099 Fax: 410-584-9117 [log in to unmask] <mailto:[log in to unmask]> www.tracelabs.com/east <http://www.tracelabs.com/east> Notice: This message is intended for the private use of the addressee. If this e-mail transmission was sent to you in error, please notify the originator. -----Original Message----- From: John Perry [mailto:[log in to unmask]] Sent: Wednesday, February 12, 2003 11:07 AM To: [log in to unmask] Subject: Re: [IPC-600-6012] Zone Concept Hi Debby, Our Listserv forums do not allow for postings with attachments for anti-viral purposes. I can have Susan send to me direct and then I can also send to the forum members outside the "zone" of the forum. Sorry - I could not resist there ;-) John IPC -----Original Message----- From: Obitz, Debora [mailto:[log in to unmask]] Sent: Wednesday, February 12, 2003 9:52 AM To: [log in to unmask] Subject: Re: [IPC-600-6012] Zone Concept Susan, I did not receive the photo. Debby Trace Labs -----Original Message----- From: Susan Mansilla [mailto:[log in to unmask]] Sent: Wednesday, February 12, 2003 11:48 AM To: [log in to unmask] Subject: Re: [IPC-600-6012] Zone Concept The photo above - hopefully this will be accepted by the forum and not stripped - presents a real problem and should be considered by everyone when we decide where to draw that zone line. Using the internals that extend the farthest plus 3 mils would allow complete voiding between layers 2 and the ground plane. Susan