Hi All,

We are having an issue at our company that I would like feedback on.

Our boards are smallish and arrive from the fabricator in an assembly array panel. Long ago, my company's specification document stated that we would only accept 100% good boards on these arrays (i.e. no x-outs) from the fabricator. The issue apparently has not been addressed (here) since that document was written. We have in-house assembly, so I was unaware of the issue until a fabricator brought it up to me. We are now looking into it and realizing that we are paying more for boards done this way and we may be able to allow 10%+ in X-outs on these arrays. (We know how to automate the process at assembly.) My question is, what is "normal" as far as the way others do things? Does your company accept X-outs and if so, what percentage do you allow.

Thanks for any thoughts.
Susy

---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------