LISTSERV - DESIGNERCOUNCIL Archives

DESIGNERCOUNCIL Archives

May 2008

DesignerCouncil@IPC.ORG

	LISTSERV Archives
	DESIGNERCOUNCIL Home
	DESIGNERCOUNCIL May 2008

	Log In
	Register

	Subscribe or Unsubscribe

	Search Archives

Options:	Use Monospaced Font Show HTML Part by Default Show All Mail Headers
Message:	[<< First] [< Prev] [Next >] [Last >>]
Topic:	[<< First] [< Prev] [Next >] [Last >>]
Author:	[<< First] [< Prev] [Next >] [Last >>]

Subject:	Re: Part Creation - Standard orientation
From:	Allen Maddox <[log in to unmask]>
Reply To:	(Designers Council Forum)
Date:	Tue, 13 May 2008 17:48:25 -0700
Content-Type:	multipart/alternative
Parts/Attachments:	text/plain (2163 bytes) , text/html (2489 bytes)

In addition to the IPC Specs, check with who's doing your assembly. Their PnP may define how the component will be picked from a tray or tape. This will help determine what your assembly house will see as zero rotation. Usually a data sheet will tell you how the component sits in the tape or tray.
  Hope this helps,
   
  Allen Maddox, CID+
  www.maddoxpcb.com
  

Fred Dark <[log in to unmask]> wrote:
  Hi Council - I'm checking on if there is a standard to creating parts (PCB decals\footprints)... Is there a preferred orientation as far as creating the footprint...? IC created horizontal, left to right, pin 1 lower left etc... 1206 horizontal, left to right pin 1 then pin 2 etc...

Regard's, Fred Dark Jr.

---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------


---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------

ATOM RSS1 RSS2

LISTSERV.IPC.ORG