DESIGNERCOUNCIL Archives

June 2002

DesignerCouncil@IPC.ORG

Options: Use Monospaced Font
Show HTML Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
JaMi Smith <[log in to unmask]>
Reply To:
(Designers Council Forum)
Date:
Mon, 24 Jun 2002 13:45:05 -0700
Content-Type:
multipart/alternative
Parts/Attachments:
text/plain (10 kB) , text/html (20 kB)
RE: [DC] FW: Next meeting of the IPC Designers Council,San Diego ChapterTry as I may, I cannot find the original of this post, so I will just reply to the latest one that I can find. Sorry if that causes any more confusion.

I would like to attend the meeting tomorrow if it is not too late, and if there is still space available, although I am not quite sure who to respond to.

I will be able to drive down from Pasadena, but due to the length of the drive I would like to confirm an RSVP before I head off into Interstate 5 / 805 gridlock.

I did try the direct RSVP email address, but due to the time I thought it best to use the shotgun approach, hence this post.

Thanks,

JaMi Smith
[log in to unmask]
626.449.4242

* * * * * * * * * *
  ----- Original Message ----- 
  From: Torres, Roberto 
  To: [log in to unmask] 
  Sent: Friday, June 14, 2002 10:50 AM
  Subject: Re: [DC] FW: Next meeting of the IPC Designers Council,San Diego Chapter


  <<<< SNIP >>>>I 

   -----Original Message-----
  From: Robert Erbacher [mailto:[log in to unmask]]
  Sent: Friday, June 14, 2002 8:02 AM
  To: [log in to unmask]
  Subject: Re: [DC] FW: Next meeting of the IPC Designers Council,San Diego Chapter



      <<<< SNIP >>>>I 


      -----Original Message-----
      From: ext Brooks,Bill [mailto:[log in to unmask]]
      Sent: Thursday, June 13, 2002 10:25 AM
      To: [log in to unmask]
      Subject: Re: [DC] FW: Next meeting of the IPC Designers Council,San Diego Chapter


      <<<< SNIP >>>>I 

        -----Original Message-----
        From: Dorina Abramovici [mailto:[log in to unmask]]
        Sent: Thursday, June 13, 2002 6:15 AM
        To: [log in to unmask]
        Subject: Re: [DC] FW: Next meeting of the IPC Designers Council,San Diego Chapter



        <<<< SNIP >>>>I 



        -----Original Message----- 
        From: [log in to unmask] [mailto:[log in to unmask]] 
        Sent: Wednesday, June 12, 2002 10:00 PM 
        To: [log in to unmask] 
        Subject: Re: [DC] FW: Next meeting of the IPC Designers Council,San 
        Diego Chapter 



        <<<< SNIP >>>>I 



        -----Original Message----- 
        From: Lum Wee Mei [mailto:[log in to unmask]] 
        Sent: Wednesday, June 12, 2002 7:36 PM 
        To: [log in to unmask] 
        Subject: Re: [DC] FW: Next meeting of the IPC Designers Council,San 
        Diego Chapter 

        <<<< SNIP >>>>I 
        "Brooks,Bill" wrote: 

        > > Meeting Notice - Meeting Notice - Meeting Notice - Meeting Notice - 
        > > Meeting Notice 
        > > 
        > > The next meeting of the IPC Designers Council, San Diego Chapter will be 
        > > held at the NEW Facilities of Overland Data, San Diego, CA. at 6:00PM on 
        > > Tuesday, June 25th, 2002. Entrance to the building is in the central 
        > > breezeway area under the stairs. A member will be monitoring the door to 
        > > help guide guests in to the conference room and food court areas. 
        > > 
        > > Our Guest Speaker will be Tony Shoot of TYCO Electronics PCB Group on 
        "BGA 
        > > Routing Strategies" 
        > > Mr. Tony Shoot is the Sr. Applications Engineer at Tyco Printed Circuit 
        > > Group, West Coast Operations. Tony has 21 years experience in the 
        Printed 
        > > Circuit Board Manufacturing Industry. 
        > > A brief description of what Tony will be covering follows: 
        > > 
        > > "The initial focus is on routing a 1mm (.039), 1849 I/O count BGA.  The 
        > > fundamentals are then applied to .8, .75 and .5 mm BGA.  With this 
        > > information, and the steps we teach, an engineer should be able to look 
        at 
        > > a part, determine preliminary layer count needed to route, and whether 
        the 
        > > need for blind, buried, micro vias or conventional technology would 
        > > apply." 
        > > 
        > > The date: Tuesday, June 25th, 2002 @ 6:00PM @ Overland Data in San 
        Diego, 
        > > CA 
        > > 
        > > 
        > > Meeting Agenda: 
        > > 6:00PM-6:30PM Dinner - (be prompt or you miss out!) 
        > > 6:30PM-6:45PM SDDC announcements, business, and introductions 
        > > 6:45PM-7:45PM - Tony Shoot - BGA Routing Strategies 
        > > 7:45PM-8:00PM Questions/answers - conclusion 
        > > 
        > > This event will be held at: 
        > > Overland Data 
        > > 4820 Overland Avenue 
        > > San Diego, California 92123 
        > > 1-800-729-8725 
        > > 1-858-571-5555 
        > > 
        > > Directions: 
        > > From Los Angeles: 
        > > From the 5 Fwy south, take the 805 Fwy South exit on the left. 
        > >  Approximately 6 miles later, exit at the Clairemont Mesa Blvd. 
        > >  West/Clairemont Mesa Blvd. East exit. Go East. Turn right onto 
        > >  Clairemont Mesa Blvd. Turn right onto Overland Avenue. Overland 
        > >  Data is located on the right side of Overland Avenue. 
        > > 
        > > From the Border on I-5 North: 
        > >  From the 5 Fwy North, take the 15 Fwy North exit towards 
        > >  Riverside for approx. 3 miles. Then take the 805 Fwy North exit 
        > >  towards Los Angeles. Turn a slight left at the intersection of 
        > >  I-8 East/I-8 West ramp to stay on the 805 Fwy North. Take the 
        > >  163 Fwy North towards Escondido. Exit at the Clairemont Mesa 
        > >  Blvd. West/Clairemont Mesa Blvd. East exit. Go East. Keep right 
        > >  at the fork in the ramp. Turn right onto Clairemont Mesa Blvd. 
        > >  Turn right onto Overland Avenue. Overland Data is located on 
        > >  the right side of Overland Avenue. 
        > > 
        > >  From I-15 going South: 
        > >  Take the Clairemont Mesa Blvd. exit and turn right onto 
        > >  Clairemont Mesa Blvd. Turn left onto Overland Avenue. Overland Data is 
        > > located on the right side of Overland Avenue. 
        > > 
        > > Important!!!! -  RSVP to [log in to unmask] prior to Monday, June 
        > > 24th, 2002. 
        > >  * Dinner will be served!! @ 6:00PM * 
        > > We need to get your RSVP to plan on food and seating. 
        > > 
        > > IPC Designers Council Members will be admitted free of charge, 
        Non-Members 
        > > will be asked to contribute a $5.00 donation at the door. Contributors 
        > > will get a $5.00 discount applied to their membership should they decide 
        > > to join the IPC Designers Council at the event. 
        > >  For the HTML version of this announcement please visit 
        > > http://www.ipc.org/SanDiego/   and click on "Events Schedule" and follow 
        > > the prompts. 
        > > More information about the IPC Designers Council is available on-line at 
        > > http://www.ipc.org/SanDiego/  or http://dc.ipc.org/ 
        > > 
        > > Bill Brooks 
        > > PCB Design Engineer , C.I.D., C.I.I. 
        > > TITAN SYSTEMS CORPORATION 
        > > DATRON WORLD COMMUNICATIONS DIVISION 
        > > 3030 Enterprise Court,Vista, CA 92083 
        > > Tel: (760)597-1500 Ext 3772 Fax: (760)597-1510 
        > > Adjunct Instructor - PCB Design 
        > > Palomar College, 1440 West Mission Road 
        > > San Marcos, CA 92069-1487 
        > > http://www.palomar.edu/ 
        > > Member of the IPC Designers Council 
        > > http://dc.ipc.org/ 
        > > Executive Board 
        > > Steering Committee 
        > > Education Committee 
        > > San Diego Chapter of the IPC Designers Council Core Group 
        > > Board of Directors, Communications Officer and Webmaster 
        > > <http://www.ipc.org/SanDiego/> 
        > > <http://home.fda.net/bbrooks/pca/pca.htm 
        > > 
        > > 
        > 
        > 
        ---------------------------------------------------------------------------- 
        ----- 
        > DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 
        1.8d 
        > To unsubscribe, send a message to [log in to unmask] with following text in 
        > the BODY (NOT the subject field): SIGNOFF DesignerCouncil. 
        > To set a vacation stop for delivery of DesignerCouncil send: SET 
        DesignerCouncil NOMAIL 
        > Search previous postings at: www.ipc.org > On-Line Resources & Databases > 
        E-mail Archives 
        > Please visit IPC web site http://www.ipc.org/html/forum.htm for additional 
        > information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 
        ext.5315 
        > 
        ---------------------------------------------------------------------------- 
        ----- 

        ---------------------------------------------------------------------------- 
        ----- 
        DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 
        1.8d 
        To unsubscribe, send a message to [log in to unmask] with following text in 
        the BODY (NOT the subject field): SIGNOFF DesignerCouncil. 
        To set a vacation stop for delivery of DesignerCouncil send: SET 
        DesignerCouncil NOMAIL 
        Search previous postings at: www.ipc.org > On-Line Resources & Databases > 
        E-mail Archives 
        Please visit IPC web site http://www.ipc.org/html/forum.htm for additional 
        information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 
        ext.5315 
        ---------------------------------------------------------------------------- 
        ----- 

        --------------------------------------------------------------------------------- 
        DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d 
        To unsubscribe, send a message to [log in to unmask] with following text in 
        the BODY (NOT the subject field): SIGNOFF DesignerCouncil. 
        To set a vacation stop for delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL 
        Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives 
        Please visit IPC web site http://www.ipc.org/html/forum.htm for additional 
        information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 
        --------------------------------------------------------------------------------- 



ATOM RSS1 RSS2