DESIGNERCOUNCIL Archives

1996

DesignerCouncil@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Received:
by ipc.org (Smail3.1.28.1 #2) id m0wQxv3-000BisC; Mon, 12 May 97 11:25 CDT
Content-Type:
TEXT/PLAIN; charset=US-ASCII
Old-Return-Path:
<TechNet-d-request>
Date:
Mon, 12 May 1997 10:45:36 -0500 (CDT)
Precedence:
list
Resent-From:
Resent-Sender:
TechNet-request [log in to unmask]
MIME-Version:
1.0
X-Mailing-List:
<[log in to unmask]> archive/latest/12604
TO:
Jack Olson <[log in to unmask]>
From [log in to unmask] Mon May 12 17:
24:56 1997
X-Loop:
Return-Path:
<TechNet-request>
Resent-Message-ID:
<"T_h693.0.K0P.6IqTp"@ipc>
Subject:
From:
David Bergman <[log in to unmask]>
>From bergdi Mon May 12 11:
26:19 1997
In-Reply-To:
cc:
Message-ID:
<Pine.3.89.9705121056.M36352-0100000@ipc>
Parts/Attachments:
TEXT/PLAIN (70 lines)
Jack, IPC-4101 is in "Interim Final" circulation and when published 
should be adequate to handle both commercial and Mil-spec replacement 
callouts.  IPC-4101 will supercede IPC-L-108 (thin lam), IPC-L-109 
(prepreg), IPC-L-112 (composite lam)  and IPC-L-115 (rigid lam).  I hope 
that within one year it will also replace MIL-P-13949.

Regards

__________________________________________________

David W. Bergman, V.P. of Technical Programs
IPC
2215 Sanders Road
Northbrook, IL  60062-6135
847-509-9700 x340 Phone
847-509-9798 Fax
email  [log in to unmask]
www  http://www.ipc.org
---------------------------------------------------


On Fri, 9 May 1997, Jack Olson wrote:

> I am embarrassed to have to ask this, because I know it has been
> discussed before, but I have a question about replacing MIL standard
> references with commercial standards. 
> 
> Our default fabrication drawing notes always say (whatever specific)
> material "per MIL-P-13949". Is that common these days? Is there a better
> replacement for material if our designs are commercial only? Does it
> even matter?
> 
> I looked at the IPC stuff and there is a whole series of IPC-L-XXX
> specs, but I wouldn't even know what is appropriate. 
> I thought I had a web link to a "comparison" kind of service, but can't
> find it (I've just discovered that many links I have been saving for a
> special occasion like this, no longer work! d'oh!)
> 
> On a more broad-scale issue: Are any of you fabrication vendors out
> there willing to share what you like to see on a fab dwg regarding
> notes? For many of us, we just want a good product and don't really care
> what the notes say, we just put whatever we think you need to see....
> What do you need to see, MINIMUM?
> 
> material, finish, mask, & legend
> quality per ipc-rb-275 for type x class x
> is that enough?							jack
> 
> ***************************************************************************
> *   The mail list is provided as a service by IPC using SmartList v3.05   *
> ***************************************************************************
> * To unsubscribe from this list at any time, send a message to:           *
> * [log in to unmask] with <subject: unsubscribe> and no text.*
> ***************************************************************************
> * If you are having a problem with the DesignerCouncil, please contact    *
> * Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
> ***************************************************************************
> 

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
* with <subject: subscribe/unsubscribe> and no text in the body.          *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************


ATOM RSS1 RSS2