Subject: | |
From: | |
Reply To: | (Designers Council Forum) |
Date: | Tue, 7 Aug 2001 08:31:45 -0700 |
Content-Type: | multipart/alternative |
Parts/Attachments: |
|
|
http://www.accusystemscorp.com/FAQ's%20-%20Index.htm
<http://www.accusystemscorp.com/FAQ's%20-%20Index.htm>
The above link has been useful to me in calculating V-Scoring parameters
based upon the panel I was designing... ;-)
Bill Brooks
PCB Design Engineer
DATRON WORLD COMMUNICATIONS INC.
3030 Enterprise Court
Vista, CA 92083
Tel: (760)597-1500 Ext 3772 Fax: (760)597-1510
mailto:[log in to unmask] <mailto:[log in to unmask]>
IPC Designers Council, San Diego Chapter
http://www.ipc.org/SanDiego/ <http://www.ipc.org/SanDiego/>
http://home.fda.net/bbrooks/pca/pca.htm
<http://home.fda.net/bbrooks/pca/pca.htm>
-----Original Message-----
From: Ed Valentine [mailto:[log in to unmask]]
Sent: Tuesday, August 07, 2001 6:20 AM
To: [log in to unmask]
Subject: Re: [DC] V Scoring
Charlene -
Assuming you are going to do a manual breakaway of the boards, I recommend a
final web thickness of 0.012" with 30 degree cutters on FR4. If you are
using mechanical/machine separation you can go slightly thicker. The thin
web thickness allows for easy, manual breakaway with minimal potential
damage to the components and the solder joints.
I'm sorry but I have not used RF35 so I am not familiar with its physical
characteristics. Ed/
Ed Valentine
Electronics Manufacturing Solutions
8612 Mourning Dove Road, Raleigh, NC 27615
Phone: (919) 270-5145, Fax: (919) 847-9971
Email: [log in to unmask] <mailto:[log in to unmask]>
Website: http://www.ems-consulting.com <http://www.ems-consulting.com>
----- Original Message -----
From: Charlene <mailto:[log in to unmask]> Dwyer
To: [log in to unmask] <mailto:[log in to unmask]>
Sent: Monday, August 06, 2001 8:01 PM
Subject: [DC] V Scoring
What depth, and angle do you spec on your panel drawings for scoring a board
with a .062 thickness?
Does it make a difference on the Board Material because we are using a
combination of FR4 and RF35 for a 4 layer board.
-Char
_____
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/ <http://phonecard.yahoo.com/>
|
|
|