 
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0v5bcv-00005BC; Tue, 24 Sep 96 12:50 CDT |
| Old-Return-Path: |
|
| Date: |
Tue, 24 Sep 96 10:58:20 PDT |
| Precedence: |
list |
| Resent-From: |
|
| Resent-Sender: |
|
| X-Status: |
|
| Status: |
O |
| X-Mailing-List: |
|
| TO: |
|
| Return-Path: |
<DesignerCouncil-request> |
| Resent-Message-ID: |
<"o52V01.0.AXM.ez1Io"@ipc> |
| Subject: |
|
| From: |
|
| X-Loop: |
|
| From [log in to unmask] Wed Sep 25 10: |
49:17 1996 |
| Cc: |
|
| Message-Id: |
|
| Parts/Attachments: |
|
|
HOWZITGOIN?
[log in to unmask] wrote:
--------------------------------------------------------------------------
Also, if we remove the thermal apertures from our pwr/gnd via padstacks,
should we replace them with a small aperture to "show" something there, or
just leave it empty? Seems like it would be hard to track down connections
looking at "direct-connected" film, any problems there?
--------------------------------------------------------------------------
Ask your board vendors, their gerber s/w may require a pad to extract a
netlist for continuity checking the finished boards. From a human
perspective, if you put some pad at all (smaller than the finished hole
size) then you won't get a phone call from the EE (check plots) or the
board fabricator (gerbers) accusing you of forgetting the connections.
Thank you and have a FANTASTIC day!
Kevin L. Seaman (714) 221-4752
P.S. If your "reply" bounces back, then "send" to:
[log in to unmask]
****************************************************************************
* The mail list is provided as a service by IPC using SmartList v3.05 *
****************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
****************************************************************************
|
|
|
