TECHNET Archives

August 2013

TechNet@IPC.ORG
Options: Hide Table of Contents

?Handheld UV source? (13 Messages)
adhesive coated wire for rework (6 Messages)
Antwort: [TN] IPC-610E, section 10.3.2, Conductors/Lands - Lifted Pads/Lands (Con't) (1 Message)
AOI (3 Messages)
Blowing Smoke (46 Messages)
Cleaning (1 Message)
Design Training Ideas... was: Refreshment (3 Messages)
DFR (Design For Rework) - I'll never have this problem again (3 Messages)
DIMM reseat issue (3 Messages)
Dropbox (2 Messages)
Elemental FYI (4 Messages)
Entrance Exam (2 Messages)
EXTERNAL: Re: [TN] [NTC]: Re: [TN] test (2 Messages)
EXTERNAL: [TN] Measuring a few parts on cut tape many times over (1 Message)
Eyelets for Circuit Repair (1 Message)
Fiber optic borescope (9 Messages)
Flip Chips (10 Messages)
Flux Type (3 Messages)
FR laminate coupon, 140x40x6 mm (3 Messages)
G-MAIL (9 Messages)
Hybrid circuits bible (7 Messages)
IPC STD, V-Score Method (1 Message)
IPC-610E, section 10.3.2, Conductors/Lands - Lifted Pads/Lands (Con't) (1 Message)
Measuring a few parts on cut tape many times over (4 Messages)
NTC again [TN] Refreshment (NTC rant continues) (17 Messages)
NTC Friday Element Quiz Answer (16 Messages)
NTC Friday Element Quiz Question (35 Messages)
NTC Space stuff, was RE: [TN] Silicone adhesives on tapes - NTC (2 Messages)
NTC: global death of forests (3 Messages)
NTC: Syria (1 Message)
PCB depanelling router (1 Message)
Plating rectifier (2 Messages)
Poisoning of Parylene Polymerization (4 Messages)
QFN solder voiding (28 Messages)
question for PCB fabricators (3 Messages)
R: [TN] IPC STD, V-Score Method (1 Message)
Refreshment (47 Messages)
Refreshment (NTC rant continues) (9 Messages)
Refreshment (NTC rant) (4 Messages)
Silicon migration (4 Messages)
Silicone adhesives on tapes (16 Messages)
Silicone adhesives on tapes - NTC (1 Message)
Singular 30% Void and Oversize Ball Diameter (1 Message)
small grinder-polisher for PCB microsections (2 Messages)
Solder joint failure (8 Messages)
Starting copper foil thickness on External layers (7 Messages)
tape splice for Mydata Agilis feeders. (1 Message)
Technet organisation (7 Messages)
test (22 Messages)
Trivia Question - Class 1, 2, 3 (2 Messages)
[IPC-600-6012] Wicking Requirement IPC 6012B/3A vs 6013C/3A (2 Messages)
[NTC]: Re: [TN] test (4 Messages)
[TN] NTC Friday Element Quiz Question (1 Message)

Subject Sorted by Subject, Most Recent First

From

Date
New Thread ?Handheld UV source?
?Handheld UV source?
Louis Hart
Tue, 20 Aug 2013 13:35:43 +0000
Re: ?Handheld UV source?
Steve Gregory
Tue, 20 Aug 2013 07:41:39 -0600
Re: ?Handheld UV source?
Wayne Thayer
Tue, 20 Aug 2013 13:46:36 +0000
Re: ?Handheld UV source?
lduso - Diamond-MT.com
Tue, 20 Aug 2013 09:49:13 -0400
Re: ?Handheld UV source?
Steve Gregory
Tue, 20 Aug 2013 07:50:48 -0600
Re: ?Handheld UV source?
Karen Tellefsen
Tue, 20 Aug 2013 09:55:15 -0400
Re: ?Handheld UV source?
Whittaker, Dewey (EHCOE)
Tue, 20 Aug 2013 14:02:39 +0000
Re: ?Handheld UV source?
Stadem, Richard D.
Tue, 20 Aug 2013 14:45:24 +0000
Re: ?Handheld UV source?
Stadem, Richard D.
Tue, 20 Aug 2013 14:46:50 +0000
Re: ?Handheld UV source?
Stadem, Richard D.
Tue, 20 Aug 2013 14:56:44 +0000
Re: ?Handheld UV source?
Whittaker, Dewey (EHCOE)
Tue, 20 Aug 2013 15:00:01 +0000
Re: ?Handheld UV source?
Ed Popielarski
Tue, 20 Aug 2013 16:04:15 +0000
Re: ?Handheld UV source?
Louis Hart
Tue, 20 Aug 2013 23:25:31 +0000
New Thread adhesive coated wire for rework
adhesive coated wire for rework
<Bruce Tostevin>
Tue, 6 Aug 2013 11:47:04 -0400
Re: adhesive coated wire for rework
Nowland, Russell Howard (Russell)
Tue, 6 Aug 2013 16:32:20 +0000
Re: adhesive coated wire for rework
Inge Hernefjord
Tue, 6 Aug 2013 19:55:34 +0200
Re: adhesive coated wire for rework
Stadem, Richard D.
Tue, 6 Aug 2013 18:03:28 +0000
Re: adhesive coated wire for rework
Inge Hernefjord
Wed, 7 Aug 2013 05:46:40 +0200
Re: adhesive coated wire for rework
Inge Hernefjord
Wed, 7 Aug 2013 06:05:19 +0200
New Thread Antwort: [TN] IPC-610E, section 10.3.2, Conductors/Lands - Lifted Pads/Lands (Con't)
Antwort: [TN] IPC-610E, section 10.3.2, Conductors/Lands - Lifted Pads/Lands (Con't)
Frank Kriesch
Thu, 8 Aug 2013 13:00:17 +0200
New Thread AOI
AOI
Steven Kelly
Thu, 29 Aug 2013 11:55:47 -0400
Re: AOI
Jerry Dengler
Thu, 29 Aug 2013 12:40:08 -0400
Re: AOI
Ron Feyereisen
Thu, 29 Aug 2013 21:20:28 +0000
New Thread Blowing Smoke
Blowing Smoke
Wayne Thayer
Wed, 28 Aug 2013 15:07:28 +0000
Re: Blowing Smoke
Subscribe TechNet Tom Granat
Wed, 28 Aug 2013 10:08:51 -0500
Re: Blowing Smoke
Rivera, Raye
Wed, 28 Aug 2013 08:19:39 -0700
Re: Blowing Smoke
Phil Bavaro
Wed, 28 Aug 2013 15:24:54 +0000
Re: Blowing Smoke
Ed Popielarski
Wed, 28 Aug 2013 15:34:20 +0000
Re: Blowing Smoke
David D. Hillman
Wed, 28 Aug 2013 10:56:41 -0500
Re: Blowing Smoke
Graham Collins
Wed, 28 Aug 2013 13:00:53 -0300
Re: Blowing Smoke
Greg Munie
Wed, 28 Aug 2013 16:12:27 +0000
Re: Blowing Smoke
Wayne Thayer
Wed, 28 Aug 2013 16:54:42 +0000
Re: Blowing Smoke
Wayne Thayer
Wed, 28 Aug 2013 17:08:44 +0000
Re: Blowing Smoke
Craig Sullivan
Wed, 28 Aug 2013 13:29:32 -0400
Re: Blowing Smoke
Drew meyer
Wed, 28 Aug 2013 12:40:17 -0500
Re: Blowing Smoke
Stadem, Richard D.
Wed, 28 Aug 2013 18:21:41 +0000
Re: Blowing Smoke
Inge Hernefjord
Wed, 28 Aug 2013 13:10:18 -0700
Re: Blowing Smoke
Whittaker, Dewey (EHCOE)
Wed, 28 Aug 2013 20:18:26 +0000
Re: Blowing Smoke
Inge Hernefjord
Wed, 28 Aug 2013 14:08:56 -0700
Re: Blowing Smoke
Steven Creswick
Wed, 28 Aug 2013 17:16:05 -0400
Re: Blowing Smoke
Mike Fenner
Wed, 28 Aug 2013 22:19:28 +0100
Re: Blowing Smoke
Inge Hernefjord
Wed, 28 Aug 2013 15:17:11 -0700
Re: Blowing Smoke
Pat Goodyear
Thu, 29 Aug 2013 01:45:40 -0400
Re: Blowing Smoke
Braddock, Iain (UK)
Thu, 29 Aug 2013 08:01:36 +0000
Re: Blowing Smoke
Inge Hernefjord
Thu, 29 Aug 2013 01:44:40 -0700
Re: Blowing Smoke
Wayne Thayer
Thu, 29 Aug 2013 14:07:22 +0000
Re: Blowing Smoke
Mike Fenner
Thu, 29 Aug 2013 15:23:22 +0100
Re: Blowing Smoke
Greg Munie
Thu, 29 Aug 2013 14:29:12 +0000
Re: Blowing Smoke
Ed Popielarski
Thu, 29 Aug 2013 15:06:34 +0000
Re: Blowing Smoke
Steven Creswick
Thu, 29 Aug 2013 12:10:20 -0400
Re: Blowing Smoke
Wayne Thayer
Thu, 29 Aug 2013 16:33:28 +0000
Re: Blowing Smoke
Steven Creswick
Thu, 29 Aug 2013 12:51:06 -0400
Re: Blowing Smoke
Wayne Thayer
Thu, 29 Aug 2013 17:03:19 +0000
Re: Blowing Smoke
Pat Goodyear
Thu, 29 Aug 2013 13:05:38 -0400
Re: Blowing Smoke
Steven Creswick
Thu, 29 Aug 2013 13:16:59 -0400
Re: Blowing Smoke
Wayne Thayer
Thu, 29 Aug 2013 17:35:22 +0000
Re: Blowing Smoke
Rivera, Raye
Thu, 29 Aug 2013 10:58:36 -0700
Re: Blowing Smoke
Wayne Thayer
Thu, 29 Aug 2013 18:04:54 +0000
Re: Blowing Smoke
Steven Creswick
Thu, 29 Aug 2013 14:10:12 -0400
Re: Blowing Smoke
Inge Hernefjord
Thu, 29 Aug 2013 11:58:58 -0700
Re: Blowing Smoke
Steven Creswick
Thu, 29 Aug 2013 15:12:35 -0400
Re: Blowing Smoke
Wayne Thayer
Thu, 29 Aug 2013 19:28:28 +0000
Re: Blowing Smoke
Steven Creswick
Thu, 29 Aug 2013 15:49:45 -0400
Re: Blowing Smoke
Rivera, Raye
Thu, 29 Aug 2013 13:30:55 -0700
Re: Blowing Smoke
Pat Goodyear
Thu, 29 Aug 2013 18:59:16 -0400
Re: Blowing Smoke
Inge Hernefjord
Thu, 29 Aug 2013 22:59:34 -0700
Re: Blowing Smoke
Wayne Thayer
Fri, 30 Aug 2013 12:36:57 +0000
Re: Blowing Smoke
Inge Hernefjord
Fri, 30 Aug 2013 07:44:25 -0700
Re: Blowing Smoke
Mike Fenner
Sat, 31 Aug 2013 12:25:51 +0100
New Thread Cleaning
Cleaning
Ed Hare
Thu, 1 Aug 2013 16:21:24 -0700
New Thread Design Training Ideas... was: Refreshment
Design Training Ideas... was: Refreshment
Ed Popielarski
Wed, 14 Aug 2013 17:14:47 +0000
Re: Design Training Ideas... was: Refreshment
pat goodyear
Thu, 15 Aug 2013 10:26:07 -1000
Re: Design Training Ideas... was: Refreshment
Inge Hernefjord
Fri, 16 Aug 2013 19:46:25 +0200
New Thread DFR (Design For Rework) - I'll never have this problem again
DFR (Design For Rework) - I'll never have this problem again
Carl VanWormer
Mon, 19 Aug 2013 17:38:12 +0000
Re: DFR (Design For Rework) - I'll never have this problem again
Stadem, Richard D.
Mon, 19 Aug 2013 18:45:01 +0000
Re: DFR (Design For Rework) - I'll never have this problem again
Upton, Shawn
Mon, 19 Aug 2013 18:59:51 +0000
New Thread DIMM reseat issue
Re: DIMM reseat issue
Inge Hernefjord
Wed, 7 Aug 2013 11:20:50 +0200
Re: DIMM reseat issue
Victor Hernandez
Wed, 7 Aug 2013 06:10:38 -0500
Re: DIMM reseat issue
Joyce Koo
Wed, 7 Aug 2013 11:24:05 +0000
New Thread Dropbox
Dropbox
Inge Hernefjord
Wed, 14 Aug 2013 03:56:37 -0700
Re: Dropbox
Joyce Koo
Wed, 14 Aug 2013 12:24:23 +0000
New Thread Elemental FYI
Elemental FYI
Ed Popielarski
Wed, 28 Aug 2013 17:07:41 +0000
Re: Elemental FYI
Douglas Pauls
Wed, 28 Aug 2013 13:10:31 -0500
Re: Elemental FYI
Leland Woodall
Wed, 28 Aug 2013 18:32:06 +0000
Re: Elemental FYI
Glidden, Kevin
Wed, 28 Aug 2013 19:34:27 +0000
New Thread Entrance Exam
FW: Entrance Exam
Whittaker, Dewey (EHCOE)
Thu, 1 Aug 2013 19:59:25 +0000
Re: Entrance Exam
Joyce Koo
Thu, 1 Aug 2013 20:08:43 +0000
New Thread EXTERNAL: Re: [TN] [NTC]: Re: [TN] test
Re: EXTERNAL: Re: [TN] [NTC]: Re: [TN] test
Gumpert, Ben
Tue, 27 Aug 2013 19:44:20 +0000
Re: EXTERNAL: Re: [TN] [NTC]: Re: [TN] test
Stadem, Richard D.
Tue, 27 Aug 2013 19:48:36 +0000
New Thread EXTERNAL: [TN] Measuring a few parts on cut tape many times over
Re: EXTERNAL: [TN] Measuring a few parts on cut tape many times over
Gumpert, Ben
Wed, 14 Aug 2013 18:30:57 +0000
New Thread Eyelets for Circuit Repair
Eyelets for Circuit Repair
Richard Krug
Wed, 28 Aug 2013 13:11:19 +0000
New Thread Fiber optic borescope
Fiber optic borescope
Bev Christian
Fri, 16 Aug 2013 07:46:33 -0400
Re: Fiber optic borescope
Steven Creswick
Fri, 16 Aug 2013 08:43:02 -0400
Re: Fiber optic borescope
Bob Landman
Fri, 16 Aug 2013 10:31:38 -0400
Re: Fiber optic borescope
Inge Hernefjord
Fri, 16 Aug 2013 19:19:59 +0200
Re: Fiber optic borescope
Steven Creswick
Fri, 16 Aug 2013 15:49:05 -0400
Re: Fiber optic borescope
Pat Goodyear
Fri, 16 Aug 2013 16:06:04 -0400
Re: Fiber optic borescope
Inge Hernefjord
Fri, 16 Aug 2013 22:48:37 +0200
Re: Fiber optic borescope
Bev Christian
Fri, 16 Aug 2013 20:07:43 -0400
Re: Fiber optic borescope
Stadem, Richard D.
Mon, 19 Aug 2013 14:06:17 +0000
New Thread Flip Chips
Flip Chips
Wayne Thayer
Tue, 27 Aug 2013 16:59:48 +0000
Re: Flip Chips
Wayne Thayer
Tue, 27 Aug 2013 17:24:43 +0000
Re: Flip Chips
Joyce Koo
Tue, 27 Aug 2013 17:38:44 +0000
Re: Flip Chips
Reuven Rokah
Tue, 27 Aug 2013 20:53:14 +0300
Re: Flip Chips
Bob Landman
Tue, 27 Aug 2013 13:54:03 -0400
Re: Flip Chips
Inge Hernefjord
Tue, 27 Aug 2013 12:37:40 -0700
Re: Flip Chips
Richard Kraszewski
Tue, 27 Aug 2013 19:59:03 +0000
Re: Flip Chips
Steven Creswick
Tue, 27 Aug 2013 19:39:38 -0400
Re: Flip Chips
Mike Fenner
Wed, 28 Aug 2013 12:36:41 +0100
Re: Flip Chips
Wayne Thayer
Wed, 28 Aug 2013 11:57:30 +0000
New Thread Flux Type
Flux Type
DATACOM - Juliano Ribeiro
Thu, 15 Aug 2013 14:07:24 -0300
Re: Flux Type
Mike Fenner
Fri, 16 Aug 2013 20:24:46 +0100
Re: Flux Type
Mike Fenner
Sat, 17 Aug 2013 10:50:47 +0100
New Thread FR laminate coupon, 140x40x6 mm
FR laminate coupon, 140x40x6 mm
Victor Hernandez
Tue, 27 Aug 2013 14:21:51 -0500
Re: FR laminate coupon, 140x40x6 mm
Jason Zhao
Tue, 27 Aug 2013 14:47:40 -0500
Re: FR laminate coupon, 140x40x6 mm
Inge Hernefjord
Tue, 27 Aug 2013 12:54:58 -0700
New Thread G-MAIL
G-MAIL
Inge Hernefjord
Sat, 17 Aug 2013 17:28:43 +0200
Re: G-MAIL
Brian Ellis
Sat, 17 Aug 2013 18:41:00 +0300
Re: G-MAIL
Inge Hernefjord
Sat, 17 Aug 2013 18:21:40 +0200
Re: G-MAIL
Victor Hernandez
Mon, 19 Aug 2013 05:59:56 -0500
Re: G-MAIL
lduso - Diamond-MT.com
Mon, 19 Aug 2013 08:45:41 -0400
Re: G-MAIL
Mike Fenner
Mon, 19 Aug 2013 14:49:26 +0100
Re: G-MAIL
Brian Ellis
Mon, 19 Aug 2013 19:08:12 +0300
Re: G-MAIL
Glidden, Kevin
Mon, 19 Aug 2013 18:07:47 +0000
Re: G-MAIL
Brian Ellis
Tue, 20 Aug 2013 08:58:58 +0300
New Thread Hybrid circuits bible
Hybrid circuits bible
Ioan Tempea
Fri, 16 Aug 2013 07:41:41 -0400
Re: Hybrid circuits bible
Wayne Thayer
Fri, 16 Aug 2013 11:55:16 +0000
Re: Hybrid circuits bible
Steven Creswick
Fri, 16 Aug 2013 08:15:39 -0400
Re: Hybrid circuits bible
Joyce Koo
Fri, 16 Aug 2013 12:16:28 +0000
Re: Hybrid circuits bible
Brian Ellis
Fri, 16 Aug 2013 15:26:59 +0300
Re: Hybrid circuits bible
Steven Creswick
Fri, 16 Aug 2013 08:33:51 -0400
Re: Hybrid circuits bible
Inge Hernefjord
Fri, 16 Aug 2013 14:47:17 +0200
New Thread IPC STD, V-Score Method
IPC STD, V-Score Method
Victor Hernandez
Wed, 21 Aug 2013 06:14:00 -0500
New Thread IPC-610E, section 10.3.2, Conductors/Lands - Lifted Pads/Lands (Con't)
IPC-610E, section 10.3.2, Conductors/Lands - Lifted Pads/Lands (Con't)
Victor Hernandez
Wed, 7 Aug 2013 11:54:44 -0500
New Thread Measuring a few parts on cut tape many times over
Measuring a few parts on cut tape many times over
Bob Wettermann
Wed, 14 Aug 2013 13:20:28 -0500
Re: Measuring a few parts on cut tape many times over
Leland Woodall
Wed, 14 Aug 2013 18:33:25 +0000
Re: Measuring a few parts on cut tape many times over
Robert Kondner
Wed, 14 Aug 2013 13:31:08 -0600
Re: Measuring a few parts on cut tape many times over
stephen gregory
Wed, 14 Aug 2013 12:39:22 -0700
New Thread NTC again [TN] Refreshment (NTC rant continues)
Re: NTC again [TN] Refreshment (NTC rant continues)
Louis Hart
Thu, 15 Aug 2013 13:40:00 +0000
Re: NTC again [TN] Refreshment (NTC rant continues)
Steve Gregory
Thu, 15 Aug 2013 08:17:53 -0600
Re: NTC again [TN] Refreshment (NTC rant continues)
Inge Hernefjord
Thu, 15 Aug 2013 16:28:17 +0200
Re: NTC again [TN] Refreshment (NTC rant continues)
Douglas Pauls
Thu, 15 Aug 2013 11:09:43 -0500
Re: NTC again [TN] Refreshment (NTC rant continues)
Larry Dzaugis
Thu, 15 Aug 2013 11:32:19 -0500
Re: NTC again [TN] Refreshment (NTC rant continues)
Inge Hernefjord
Thu, 15 Aug 2013 18:33:36 +0200
Re: NTC again [TN] Refreshment (NTC rant continues)
Drew meyer
Thu, 15 Aug 2013 11:38:50 -0500
Re: NTC again [TN] Refreshment (NTC rant continues)
Whittaker, Dewey (EHCOE)
Thu, 15 Aug 2013 17:02:53 +0000
Re: NTC again [TN] Refreshment (NTC rant continues)
Inge Hernefjord
Thu, 15 Aug 2013 19:57:15 +0200
Re: NTC again [TN] Refreshment (NTC rant continues)
James Head
Fri, 16 Aug 2013 08:27:52 +0100
Re: NTC again [TN] Refreshment (NTC rant continues)
Ed Popielarski
Fri, 16 Aug 2013 17:55:06 +0000
Re: NTC again [TN] Refreshment (NTC rant continues)
Whittaker, Dewey (EHCOE)
Fri, 16 Aug 2013 18:00:54 +0000
Re: NTC again [TN] Refreshment (NTC rant continues)
Steve Gregory
Fri, 16 Aug 2013 12:01:53 -0600
Re: NTC again [TN] Refreshment (NTC rant continues)
Victor Hernandez
Fri, 16 Aug 2013 13:14:38 -0500
Re: NTC again [TN] Refreshment (NTC rant continues)
Steven Creswick
Fri, 16 Aug 2013 15:53:14 -0400
Re: NTC again [TN] Refreshment (NTC rant continues)
Ed Popielarski
Thu, 22 Aug 2013 15:57:39 +0000
Re: NTC again [TN] Refreshment (NTC rant continues)
Inge Hernefjord
Thu, 22 Aug 2013 10:33:58 -0700
New Thread NTC Friday Element Quiz Answer
NTC Friday Element Quiz Answer
David D. Hillman
Fri, 2 Aug 2013 11:23:39 -0500
Re: NTC Friday Element Quiz Answer
Mark Kostinovsky
Fri, 2 Aug 2013 16:55:43 +0000
Re: NTC Friday Element Quiz Answer
Guy Ramsey
Fri, 2 Aug 2013 13:41:09 -0400
NTC Friday Element Quiz Answer
David D. Hillman
Fri, 9 Aug 2013 15:13:32 -0500
Re: NTC Friday Element Quiz Answer
Keith Calhoun
Mon, 12 Aug 2013 07:53:19 -0400
Re: NTC Friday Element Quiz Answer
Robert e. welch
Mon, 12 Aug 2013 17:42:17 +0000
NTC Friday Element Quiz Answer
David D. Hillman
Thu, 15 Aug 2013 14:01:51 -0500
Re: NTC Friday Element Quiz Answer
Paul Reid
Thu, 15 Aug 2013 16:09:55 -0400
Re: NTC Friday Element Quiz Answer
Whittaker, Dewey (EHCOE)
Thu, 15 Aug 2013 20:18:17 +0000
Re: NTC Friday Element Quiz Answer
Stadem, Richard D.
Thu, 15 Aug 2013 20:26:06 +0000
Re: NTC Friday Element Quiz Answer
Paul Reid
Fri, 16 Aug 2013 08:02:14 -0400
Re: NTC Friday Element Quiz Answer
Paul Reid
Fri, 16 Aug 2013 08:04:40 -0400
Re: NTC Friday Element Quiz Answer
Whittaker, Dewey (EHCOE)
Fri, 16 Aug 2013 13:30:54 +0000
NTC Friday Element Quiz Answer
David D. Hillman
Thu, 29 Aug 2013 18:34:18 -0500
Re: NTC Friday Element Quiz Answer
Greg Munie
Fri, 30 Aug 2013 12:56:29 +0000
Re: NTC Friday Element Quiz Answer
David D. Hillman
Fri, 30 Aug 2013 09:09:24 -0500
New Thread NTC Friday Element Quiz Question
NTC Friday Element Quiz Question
David D. Hillman
Thu, 1 Aug 2013 16:53:56 -0500
Re: NTC Friday Element Quiz Question
Greg Munie
Thu, 1 Aug 2013 22:07:59 +0000
Re: NTC Friday Element Quiz Question
Mark Kostinovsky
Thu, 1 Aug 2013 22:08:44 +0000
Re: NTC Friday Element Quiz Question
Phil Bavaro
Thu, 1 Aug 2013 22:12:17 +0000
Re: NTC Friday Element Quiz Question
Guy Ramsey
Fri, 2 Aug 2013 08:02:21 -0400
Re: NTC Friday Element Quiz Question
Robert e. welch
Fri, 2 Aug 2013 12:24:34 +0000
NTC Friday Element Quiz Question
David D. Hillman
Fri, 9 Aug 2013 06:53:00 -0500
Re: NTC Friday Element Quiz Question
Keith Calhoun
Fri, 9 Aug 2013 07:58:43 -0400
Re: NTC Friday Element Quiz Question
Brian Ellis
Fri, 9 Aug 2013 15:06:21 +0300
Re: NTC Friday Element Quiz Question
Steven Creswick
Fri, 9 Aug 2013 08:15:45 -0400
Re: NTC Friday Element Quiz Question
Stadem, Richard D.
Fri, 9 Aug 2013 12:38:00 +0000
Re: NTC Friday Element Quiz Question
Bob Landman
Fri, 9 Aug 2013 08:41:53 -0400
Re: NTC Friday Element Quiz Question
Douglas Pauls
Fri, 9 Aug 2013 07:43:22 -0500
Re: NTC Friday Element Quiz Question
Stadem, Richard D.
Fri, 9 Aug 2013 12:48:06 +0000
Re: NTC Friday Element Quiz Question
Bob Landman
Fri, 9 Aug 2013 08:50:55 -0400
Re: NTC Friday Element Quiz Question
Steven Creswick
Fri, 9 Aug 2013 08:53:44 -0400
Re: NTC Friday Element Quiz Question
Pat Goodyear
Fri, 9 Aug 2013 14:24:38 -0400
Re: NTC Friday Element Quiz Question
Graham Naisbitt
Mon, 12 Aug 2013 18:26:03 +0100
NTC Friday Element Quiz Question
David D. Hillman
Thu, 15 Aug 2013 07:05:27 -0500
Re: NTC Friday Element Quiz Question
Paul Reid
Thu, 15 Aug 2013 08:12:29 -0400
Re: NTC Friday Element Quiz Question
Graham Collins
Thu, 15 Aug 2013 09:17:24 -0300
Re: NTC Friday Element Quiz Question
Arbour, Michel
Thu, 15 Aug 2013 12:16:36 +0000
Re: NTC Friday Element Quiz Question
Carroll, Thomas A
Thu, 15 Aug 2013 12:25:17 +0000
Re: NTC Friday Element Quiz Question
Mike Fenner
Thu, 15 Aug 2013 14:00:18 +0100
Re: NTC Friday Element Quiz Question
David D. Hillman
Thu, 15 Aug 2013 08:28:29 -0500
NTC Friday Element Quiz Question
David D. Hillman
Thu, 29 Aug 2013 07:01:06 -0500
Re: NTC Friday Element Quiz Question
Greg Munie
Thu, 29 Aug 2013 12:16:05 +0000
Re: NTC Friday Element Quiz Question
Leland Woodall
Thu, 29 Aug 2013 12:23:08 +0000
Re: NTC Friday Element Quiz Question
Fernandes, Adriano
Thu, 29 Aug 2013 12:28:37 +0000
Re: NTC Friday Element Quiz Question
Steven Creswick
Thu, 29 Aug 2013 08:39:11 -0400
Re: NTC Friday Element Quiz Question
Phil Kinner
Thu, 29 Aug 2013 14:36:34 +0100
Re: NTC Friday Element Quiz Question
Robert e. welch
Thu, 29 Aug 2013 13:46:01 +0000
Re: NTC Friday Element Quiz Question
Chuck Brummer
Thu, 29 Aug 2013 07:53:01 -0700
Re: NTC Friday Element Quiz Question
Pat Goodyear
Thu, 29 Aug 2013 13:12:47 -0400
Re: NTC Friday Element Quiz Question
Don Vischulis
Thu, 29 Aug 2013 17:11:42 -0500
New Thread NTC Space stuff, was RE: [TN] Silicone adhesives on tapes - NTC
NTC Space stuff, was RE: [TN] Silicone adhesives on tapes - NTC
Ed Popielarski
Mon, 12 Aug 2013 15:21:12 +0000
Re: NTC Space stuff, was RE: [TN] Silicone adhesives on tapes - NTC
Bob Landman
Mon, 12 Aug 2013 18:59:01 -0400
New Thread NTC: global death of forests
NTC: global death of forests
Inge Hernefjord
Wed, 28 Aug 2013 01:00:12 -0700
Re: NTC: global death of forests
Ed Popielarski
Wed, 28 Aug 2013 14:39:15 +0000
Re: NTC: global death of forests
Inge Hernefjord
Wed, 28 Aug 2013 08:11:54 -0700
New Thread NTC: Syria
NTC: Syria
Inge Hernefjord
Sat, 31 Aug 2013 18:35:16 -0700
New Thread PCB depanelling router
PCB depanelling router
Ed Popielarski
Mon, 19 Aug 2013 17:39:43 +0000
New Thread Plating rectifier
Plating rectifier
Louis Hart
Thu, 22 Aug 2013 18:28:00 +0000
Re: Plating rectifier
EIMCNews
Thu, 22 Aug 2013 11:54:51 -0700
New Thread Poisoning of Parylene Polymerization
Poisoning of Parylene Polymerization
Richard Kraszewski
Wed, 28 Aug 2013 20:53:55 +0000
Re: Poisoning of Parylene Polymerization
Joyce Koo
Wed, 28 Aug 2013 20:58:56 +0000
Re: Poisoning of Parylene Polymerization
Douglas Pauls
Thu, 29 Aug 2013 09:15:01 -0500
Re: Poisoning of Parylene Polymerization
Lamar Young
Thu, 29 Aug 2013 13:50:18 -0400
New Thread QFN solder voiding
QFN solder voiding
Kerr, Bryan (UK)
Wed, 7 Aug 2013 11:38:12 +0000
Re: QFN solder voiding
Wayne Thayer
Wed, 7 Aug 2013 11:45:22 +0000
Re: QFN solder voiding
Kerr, Bryan (UK)
Wed, 7 Aug 2013 11:53:21 +0000
Re: QFN solder voiding
Stadem, Richard D.
Wed, 7 Aug 2013 12:11:43 +0000
Re: QFN solder voiding
Larry Dzaugis
Wed, 7 Aug 2013 09:26:51 -0500
Re: QFN solder voiding
David D. Hillman
Wed, 7 Aug 2013 09:44:55 -0500
Re: QFN solder voiding
Stadem, Richard D.
Wed, 7 Aug 2013 15:49:54 +0000
Re: QFN solder voiding
Bob Landman
Wed, 7 Aug 2013 12:53:38 -0400
Re: QFN solder voiding
David D. Hillman
Wed, 7 Aug 2013 13:51:18 -0500
Re: QFN solder voiding
Whittaker, Dewey (EHCOE)
Wed, 7 Aug 2013 19:11:14 +0000
Re: QFN solder voiding
Robert Kondner
Wed, 7 Aug 2013 15:16:05 -0400
Re: QFN solder voiding
Bob Landman
Wed, 7 Aug 2013 15:28:01 -0400
Re: QFN solder voiding
Stadem, Richard D.
Wed, 7 Aug 2013 19:37:47 +0000
Re: QFN solder voiding
Stadem, Richard D.
Wed, 7 Aug 2013 19:38:34 +0000
Re: QFN solder voiding
Whittaker, Dewey (EHCOE)
Wed, 7 Aug 2013 19:47:18 +0000
Re: QFN solder voiding
Steve Gregory
Wed, 7 Aug 2013 14:12:02 -0600
Re: QFN solder voiding
Ed Popielarski
Wed, 7 Aug 2013 20:51:11 +0000
Re: QFN solder voiding
Whittaker, Dewey (EHCOE)
Wed, 7 Aug 2013 21:32:24 +0000
Re: QFN solder voiding
<>
Wed, 7 Aug 2013 17:43:28 -0600
Re: QFN solder voiding
Joyce Koo
Thu, 8 Aug 2013 00:12:04 +0000
Re: QFN solder voiding
Kerr, Bryan (UK)
Thu, 8 Aug 2013 07:53:39 +0000
Re: QFN solder voiding
Joyce Koo
Thu, 8 Aug 2013 10:37:26 +0000
Re: QFN solder voiding
Stadem, Richard D.
Thu, 8 Aug 2013 12:31:23 +0000
Re: QFN solder voiding
David D. Hillman
Thu, 8 Aug 2013 07:39:31 -0500
Re: QFN solder voiding
Joyce Koo
Thu, 8 Aug 2013 12:55:51 +0000
Re: QFN solder voiding
David D. Hillman
Thu, 8 Aug 2013 08:01:21 -0500
Re: QFN solder voiding
Douglas Pauls
Thu, 8 Aug 2013 08:02:39 -0500
Re: QFN solder voiding
Whittaker, Dewey (EHCOE)
Thu, 8 Aug 2013 13:24:31 +0000
New Thread question for PCB fabricators
question for PCB fabricators
Louis Hart
Fri, 9 Aug 2013 16:35:16 +0000
Re: question for PCB fabricators
Wayne Thayer
Fri, 9 Aug 2013 17:02:19 +0000
Re: question for PCB fabricators
Ahne Oosterhof
Fri, 9 Aug 2013 13:37:49 -0700
New Thread R: [TN] IPC STD, V-Score Method
R: [TN] IPC STD, V-Score Method
SALA GABRIELE
Wed, 21 Aug 2013 13:52:38 +0200
New Thread Refreshment
Refreshment
Inge Hernefjord
Tue, 13 Aug 2013 03:00:28 -0700
Re: Refreshment
Ed Popielarski
Tue, 13 Aug 2013 15:32:57 +0000
Re: Refreshment
Victor Hernandez
Tue, 13 Aug 2013 11:00:09 -0500
Re: Refreshment
Ed Popielarski
Tue, 13 Aug 2013 16:07:25 +0000
Re: Refreshment
Wayne Thayer
Tue, 13 Aug 2013 16:11:30 +0000
Re: Refreshment
Whittaker, Dewey (EHCOE)
Tue, 13 Aug 2013 16:12:30 +0000
Re: Refreshment
Stadem, Richard D.
Tue, 13 Aug 2013 18:17:34 +0000
Re: Refreshment
Ed Popielarski
Tue, 13 Aug 2013 19:47:19 +0000
Re: Refreshment
Douglas Pauls
Tue, 13 Aug 2013 15:23:35 -0500
Re: Refreshment
Stadem, Richard D.
Tue, 13 Aug 2013 21:54:20 +0000
Re: Refreshment
Stadem, Richard D.
Tue, 13 Aug 2013 21:57:03 +0000
Re: Refreshment
Pat Goodyear
Tue, 13 Aug 2013 22:20:34 -0400
Re: Refreshment
Douglas Pauls
Wed, 14 Aug 2013 07:42:52 -0500
Re: Refreshment
Pete
Wed, 14 Aug 2013 07:58:07 -0500
Re: Refreshment
<Bruce Tostevin>
Wed, 14 Aug 2013 09:43:14 -0400
Re: Refreshment
Joyce Koo
Wed, 14 Aug 2013 14:00:51 +0000
Re: Refreshment
Bob Landman
Wed, 14 Aug 2013 12:07:01 -0400
Re: Refreshment
Stadem, Richard D.
Wed, 14 Aug 2013 16:06:30 +0000
Re: Refreshment
<Bruce Tostevin>
Wed, 14 Aug 2013 12:37:45 -0400
Re: Refreshment
Drew meyer
Wed, 14 Aug 2013 11:51:35 -0500
Re: Refreshment
Ed Popielarski
Wed, 14 Aug 2013 16:54:28 +0000
Re: Refreshment
Steve Smith
Wed, 14 Aug 2013 17:01:06 +0000
Re: Refreshment
Greg Munie
Wed, 14 Aug 2013 17:02:19 +0000
Re: Refreshment
Steven Creswick
Wed, 14 Aug 2013 13:03:50 -0400
Re: Refreshment
Ed Popielarski
Wed, 14 Aug 2013 17:05:00 +0000
Re: Refreshment
Joyce Koo
Wed, 14 Aug 2013 17:32:16 +0000
Re: Refreshment
Mike Fenner
Mon, 19 Aug 2013 14:22:47 +0100
Re: Refreshment
Nutting, Phil
Mon, 19 Aug 2013 14:01:16 +0000
Re: Refreshment
Bob Landman
Mon, 19 Aug 2013 10:29:44 -0400
Re: Refreshment
James Head
Mon, 19 Aug 2013 16:19:59 +0100
Re: Refreshment
Leland Woodall
Mon, 19 Aug 2013 15:46:10 +0000
Re: Refreshment
Ed Popielarski
Mon, 19 Aug 2013 15:49:21 +0000
Re: Refreshment
Pat Goodyear
Mon, 19 Aug 2013 12:23:23 -0400
Re: Refreshment
Bob Landman
Mon, 19 Aug 2013 13:24:02 -0400
Re: Refreshment
Stadem, Richard D.
Mon, 19 Aug 2013 17:25:53 +0000
Re: Refreshment
Bob Landman
Mon, 19 Aug 2013 15:55:00 -0400
Re: Refreshment
James Mahoney
Mon, 19 Aug 2013 16:30:11 -0400
Re: Refreshment
Inge Hernefjord
Tue, 20 Aug 2013 00:30:18 -0700
Re: Refreshment
Rivera, Raye
Tue, 20 Aug 2013 12:30:06 -0700
Re: Refreshment
Douglas Pauls
Tue, 20 Aug 2013 14:54:48 -0500
Re: Refreshment
Stadem, Richard D.
Tue, 20 Aug 2013 19:59:11 +0000
Re: Refreshment
Douglas Pauls
Tue, 20 Aug 2013 15:21:08 -0500
Re: Refreshment
Whittaker, Dewey (EHCOE)
Tue, 20 Aug 2013 20:46:08 +0000
Re: Refreshment
Whittaker, Dewey (EHCOE)
Tue, 20 Aug 2013 20:47:55 +0000
Re: Refreshment
Douglas Pauls
Tue, 20 Aug 2013 16:02:46 -0500
Re: Refreshment
Bob Landman
Tue, 20 Aug 2013 17:50:40 -0400
Re: Refreshment
Larry Dzaugis
Tue, 20 Aug 2013 17:58:59 -0500
New Thread Refreshment (NTC rant continues)
Re: Refreshment (NTC rant continues)
Bev Christian
Wed, 14 Aug 2013 20:20:07 -0400
Re: Refreshment (NTC rant continues)
Nutting, Phil
Thu, 15 Aug 2013 12:51:06 +0000
Re: Refreshment (NTC rant continues)
Larry Dzaugis
Thu, 15 Aug 2013 09:03:43 -0500
Re: Refreshment (NTC rant continues)
Karen Tellefsen
Thu, 15 Aug 2013 10:09:38 -0400
Re: Refreshment (NTC rant continues)
Aleks Lozinsky
Thu, 15 Aug 2013 14:40:16 +0000
Re: Refreshment (NTC rant continues)
Inge Hernefjord
Thu, 15 Aug 2013 17:22:34 +0200
Re: Refreshment (NTC rant continues)
Steve Smith
Thu, 15 Aug 2013 15:25:10 +0000
Re: Refreshment (NTC rant continues)
Larry Dzaugis
Thu, 15 Aug 2013 11:29:28 -0500
Re: Refreshment (NTC rant continues)
Inge Hernefjord
Thu, 15 Aug 2013 18:59:20 +0200
New Thread Refreshment (NTC rant)
Re: Refreshment (NTC rant)
Nutting, Phil
Tue, 13 Aug 2013 17:10:40 +0000
Re: Refreshment (NTC rant)
Steven Creswick
Tue, 13 Aug 2013 13:53:48 -0400
Re: Refreshment (NTC rant)
Larry Dzaugis
Tue, 13 Aug 2013 16:25:43 -0500
Re: Refreshment (NTC rant)
Inge Hernefjord
Wed, 14 Aug 2013 03:48:47 -0700
New Thread Silicon migration
Silicon migration
Inge Hernefjord
Mon, 12 Aug 2013 15:45:19 -0700
Re: Silicon migration
Joyce Koo
Tue, 13 Aug 2013 00:07:57 +0000
Re: Silicon migration
John Maxwell
Mon, 12 Aug 2013 20:33:14 -0700
Re: Silicon migration
Don Vischulis
Tue, 13 Aug 2013 05:51:06 -0500
New Thread Silicone adhesives on tapes
Silicone adhesives on tapes
Stadem, Richard D.
Tue, 6 Aug 2013 13:17:57 +0000
Re: Silicone adhesives on tapes
Guy Ramsey
Tue, 6 Aug 2013 10:27:01 -0400
Re: Silicone adhesives on tapes
Lee Hitchens
Tue, 6 Aug 2013 21:40:36 +0700
Re: Silicone adhesives on tapes
Steven Creswick
Tue, 6 Aug 2013 10:51:18 -0400
Re: Silicone adhesives on tapes
Joyce Koo
Tue, 6 Aug 2013 15:01:21 +0000
Re: Silicone adhesives on tapes
Craig Sullivan
Tue, 6 Aug 2013 11:05:31 -0400
Re: Silicone adhesives on tapes
lduso - Diamond-MT.com
Tue, 6 Aug 2013 11:44:55 -0400
Re: Silicone adhesives on tapes
Stadem, Richard D.
Tue, 6 Aug 2013 16:00:03 +0000
Re: Silicone adhesives on tapes
Wayne Thayer
Tue, 6 Aug 2013 17:29:42 +0000
Re: Silicone adhesives on tapes
Joyce Koo
Tue, 6 Aug 2013 17:34:05 +0000
Re: Silicone adhesives on tapes
Inge Hernefjord
Tue, 6 Aug 2013 23:02:56 -0700
Re: Silicone adhesives on tapes
Richard Kraszewski
Sat, 10 Aug 2013 18:07:06 +0000
Re: Silicone adhesives on tapes
Bev Christian
Sun, 11 Aug 2013 14:20:44 -0400
Re: Silicone adhesives on tapes
Inge Hernefjord
Mon, 12 Aug 2013 00:48:02 +0200
Re: Silicone adhesives on tapes
Joyce Koo
Mon, 12 Aug 2013 00:28:04 +0000
Re: Silicone adhesives on tapes
Nutting, Phil
Mon, 12 Aug 2013 14:11:38 +0000
New Thread Silicone adhesives on tapes - NTC
Re: Silicone adhesives on tapes - NTC
Steven Creswick
Sun, 11 Aug 2013 19:03:24 -0400
New Thread Singular 30% Void and Oversize Ball Diameter
Re: Singular 30% Void and Oversize Ball Diameter
Inge Hernefjord
Wed, 7 Aug 2013 10:25:24 +0200
New Thread small grinder-polisher for PCB microsections
small grinder-polisher for PCB microsections
Louis Hart
Fri, 16 Aug 2013 18:59:02 +0000
Re: small grinder-polisher for PCB microsections
Victor Hernandez
Fri, 16 Aug 2013 14:53:15 -0500
New Thread Solder joint failure
Solder joint failure
Victor Hernandez
Thu, 29 Aug 2013 13:52:55 -0500
Re: Solder joint failure
Glidden, Kevin
Thu, 29 Aug 2013 19:00:38 +0000
Re: Solder joint failure
Whittaker, Dewey (EHCOE)
Thu, 29 Aug 2013 19:09:58 +0000
Re: Solder joint failure
Gerald Bogert
Thu, 29 Aug 2013 15:41:07 -0400
Re: Solder joint failure
Robert Kondner
Thu, 29 Aug 2013 15:08:03 -0400
Re: Solder joint failure
David D. Hillman
Thu, 29 Aug 2013 18:19:26 -0500
Re: Solder joint failure
Fox, Ian
Fri, 30 Aug 2013 08:24:58 +0000
Re: Solder joint failure
Brian Ellis
Fri, 30 Aug 2013 12:00:52 +0300
New Thread Starting copper foil thickness on External layers
Starting copper foil thickness on External layers
Nagaraj Shanmugam
Wed, 7 Aug 2013 06:18:14 -0700
Re: Starting copper foil thickness on External layers
Robert Kondner
Wed, 7 Aug 2013 10:30:35 -0400
Re: Starting copper foil thickness on External layers
Jason Zhao
Wed, 7 Aug 2013 09:55:55 -0500
Re: Starting copper foil thickness on External layers
EIMCNews
Wed, 7 Aug 2013 08:33:59 -0700
Re: Starting copper foil thickness on External layers
Nagaraj Shanmugam
Wed, 7 Aug 2013 23:26:23 -0700
Re: Starting copper foil thickness on External layers
EIMCNews
Thu, 8 Aug 2013 08:42:37 -0700
Re: Starting copper foil thickness on External layers
Jason Zhao
Fri, 9 Aug 2013 10:33:38 -0500
New Thread tape splice for Mydata Agilis feeders.
tape splice for Mydata Agilis feeders.
Dominic Boudreau
Tue, 20 Aug 2013 15:16:39 -0400
New Thread Technet organisation
Technet organisation
Brian Ellis
Sat, 17 Aug 2013 13:57:48 +0300
Re: Technet organisation
Bev Christian
Sat, 17 Aug 2013 10:29:58 -0400
Re: Technet organisation
Inge Hernefjord
Sat, 17 Aug 2013 17:14:57 +0200
Re: Technet organisation
Brian Ellis
Sat, 17 Aug 2013 18:19:01 +0300
Re: Technet organisation
Don Vischulis
Sun, 18 Aug 2013 06:37:53 -0500
Re: Technet organisation
Joyce Koo
Sun, 18 Aug 2013 14:41:23 +0000
Re: TechNet organisation
Mike Fenner
Mon, 19 Aug 2013 14:11:03 +0100
New Thread test
test
Inge Hernefjord
Mon, 26 Aug 2013 15:21:14 -0700
Re: test
Steven Creswick
Mon, 26 Aug 2013 18:26:24 -0400
Re: test
Joyce Koo
Mon, 26 Aug 2013 22:32:17 +0000
Re: test
Inge Hernefjord
Tue, 27 Aug 2013 09:46:33 -0700
Re: test
Inge Hernefjord
Tue, 27 Aug 2013 09:54:37 -0700
Re: test
Bob Landman
Tue, 27 Aug 2013 12:59:01 -0400
Re: test
Stadem, Richard D.
Tue, 27 Aug 2013 17:24:39 +0000
Re: test
Phil Bavaro
Tue, 27 Aug 2013 17:30:32 +0000
Re: test
Douglas Pauls
Tue, 27 Aug 2013 12:46:05 -0500
Re: test
Mike Fenner
Wed, 28 Aug 2013 12:04:10 +0100
Re: test
Steven Creswick
Wed, 28 Aug 2013 07:43:31 -0400
Re: test
Stadem, Richard D.
Wed, 28 Aug 2013 12:28:33 +0000
Re: test
Pete
Wed, 28 Aug 2013 08:39:18 -0500
Re: test
Whittaker, Dewey (EHCOE)
Wed, 28 Aug 2013 13:51:41 +0000
Re: test
Douglas Pauls
Wed, 28 Aug 2013 09:14:32 -0500
Re: test
Whittaker, Dewey (EHCOE)
Wed, 28 Aug 2013 14:31:12 +0000
Re: test
Inge Hernefjord
Wed, 28 Aug 2013 07:31:20 -0700
Re: test
Ed Popielarski
Wed, 28 Aug 2013 14:35:09 +0000
Re: test
Stadem, Richard D.
Wed, 28 Aug 2013 14:49:58 +0000
Re: test
Steven Creswick
Wed, 28 Aug 2013 16:44:04 -0400
Re: test
Ed Popielarski
Wed, 28 Aug 2013 20:45:24 +0000
Re: test
Inge Hernefjord
Wed, 28 Aug 2013 14:11:56 -0700
New Thread Trivia Question - Class 1, 2, 3
Trivia Question - Class 1, 2, 3
Gregg Owens
Wed, 7 Aug 2013 22:51:03 +0000
Re: Trivia Question - Class 1, 2, 3
[log in to unmask]
Thu, 8 Aug 2013 00:28:36 +0000
New Thread [IPC-600-6012] Wicking Requirement IPC 6012B/3A vs 6013C/3A
Re: [IPC-600-6012] Wicking Requirement IPC 6012B/3A vs 6013C/3A
Whittaker, Dewey (EHCOE)
Wed, 14 Aug 2013 14:23:08 +0000
Re: [IPC-600-6012] Wicking Requirement IPC 6012B/3A vs 6013C/3A
Victor Hernandez
Wed, 14 Aug 2013 12:10:11 -0500
New Thread [NTC]: Re: [TN] test
[NTC]: Re: [TN] test
Gumpert, Ben
Tue, 27 Aug 2013 18:14:12 +0000
Re: [NTC]: Re: [TN] test
Robert Kondner
Tue, 27 Aug 2013 14:42:32 -0400
Re: [NTC]: Re: [TN] test
Bob Landman
Tue, 27 Aug 2013 15:47:28 -0400
[NTC]: Re: [TN] test
Kuczynski, Michael
Tue, 27 Aug 2013 20:16:36 +0000
New Thread [TN] NTC Friday Element Quiz Question
FW: [TN] NTC Friday Element Quiz Question
Mark Kostinovsky
Thu, 1 Aug 2013 22:24:39 +0000

ATOM RSS1 RSS2