TECHNET Archives

December 2011

TechNet@IPC.ORG
Options: Hide Table of Contents

Ahne Oosterhof (2 Messages)
Alain Savard (1 Message)
Amol Kane (1 Message)
Andrzej Zielinski (1 Message)
Barry Gallegos (1 Message)
Bev Christian (9 Messages)
Bill Kunkle (1 Message)
Blair Hogg (3 Messages)
Blomberg, Rainer (FL51) (1 Message)
Brian Ellis (9 Messages)
Brian Stumm (1 Message)
Brown, Dock (1 Message)
Burl (1 Message)
Christopher Young (1 Message)
Craig Sullivan (2 Messages)
David D. Hillman (12 Messages)
Douglas Pauls (5 Messages)
Dwight Mattix (1 Message)
Ed (1 Message)
Eric Laroche (1 Message)
Frank Kimmey (2 Messages)
Frederick Miller (1 Message)
Garcia, Rigo (GSFC-300.0)[MANTECH SRS TECHNOLOGIES] (4 Messages)
Gerald Bogert (3 Messages)
Glidden, Kevin (2 Messages)
Goodyear, Patrick (6 Messages)
Graham Collins (4 Messages)
Gumpert, Ben (2 Messages)
Guy Ramsey (13 Messages)
Ilknur Baylakoglu (1 Message)
Inge Hernefjord (2 Messages)
Inge (1 Message)
Ioan Tempea (3 Messages)
Jack Olson (5 Messages)
James Head (2 Messages)
Jim Carlson (1 Message)
John Balchunas (2 Messages)
John Maxwell (1 Message)
Jonathan Griffiths Merlin Circuit Technology Ltd (1 Message)
Joyce Koo (19 Messages)
Karen Tellefsen (1 Message)
Keach Sasamori (2 Messages)
Keith Calhoun (1 Message)
Kris Roberson (4 Messages)
Larry Dzaugis (6 Messages)
Leif Laerum (2 Messages)
Leland Woodall (2 Messages)
Louis Hart (1 Message)
Mark Larson (3 Messages)
Matthias Mansfeld (5 Messages)
Mike Buetow (1 Message)
Mike Fenner (10 Messages)
Nigel Burtt (2 Messages)
Pete (8 Messages)
Phil Bavaro (10 Messages)
Phil Kinner (1 Message)
Phil Nutting (6 Messages)
Post, Scott E (2 Messages)
Reuven Rokah (9 Messages)
Rex Waygood (3 Messages)
Richard D. Krug (2 Messages)
Richard Hatano (1 Message)
Rick Bell (1 Message)
Rivera, Raye (1 Message)
Robert Kondner (12 Messages)
Robert Wolfe (4 Messages)
SALA GABRIELE (1 Message)
Stadem, Richard D. (13 Messages)
Steve Gregory (7 Messages)
Steve Mikell (1 Message)
Steven Creswick (9 Messages)
Tan Geok Ang (2 Messages)
Terry Munson (1 Message)
Thayer, Wayne - IIW (1 Message)
Upton, Shawn (1 Message)
Victor Hernandez (1 Message)
Vladimir Igoshev (1 Message)
Whittaker, Dewey (EHCOE) (9 Messages)
William Noel (2 Messages)
Woolley, Mark D. (Mark) (1 Message)

Subject

From Sorted by Sender, Alphabetically

Date
New Sender Ahne Oosterhof
Re: PCB Design Rant
Ahne Oosterhof
Thu, 22 Dec 2011 10:12:24 -0800
Re: PCB Design Rant
Ahne Oosterhof
Sun, 25 Dec 2011 19:36:10 -0800
New Sender Alain Savard
Re: TechNet Digest - 19 Dec 2011 to 20 Dec 2011 (#2011-332)
Alain Savard
Wed, 21 Dec 2011 18:55:56 -0600
New Sender Amol Kane
Re: PCB Design Rant
Amol Kane
Thu, 29 Dec 2011 14:56:01 -0500
New Sender Andrzej Zielinski
Re: Real World Acceptability of Solder Balls.
Andrzej Zielinski
Thu, 1 Dec 2011 18:00:47 +0000
New Sender Barry Gallegos
Re: pcb
Barry Gallegos
Thu, 29 Dec 2011 11:10:25 -0700
New Sender Bev Christian
Re: Bill Kenyon passed away---UPDATE FROM HIS DAUGHTER LIZ
Bev Christian
Sat, 31 Dec 2011 14:29:23 -0500
Re: cracked capacitors
Bev Christian
Tue, 13 Dec 2011 21:14:20 -0500
Re: NTC Friday Element Quiz - the Answer
Bev Christian
Sat, 10 Dec 2011 09:39:34 -0500
Re: NTC Friday Element Quiz - the Answer
Bev Christian
Fri, 16 Dec 2011 20:13:29 -0500
Re: NTC Friday Element Quiz - the Question
Bev Christian
Thu, 1 Dec 2011 20:42:20 -0500
Re: NTC Friday Element Quiz - the Question
Bev Christian
Thu, 1 Dec 2011 20:42:20 -0500
Re: NTC Friday Element Quiz - the Question
Bev Christian
Thu, 15 Dec 2011 20:57:26 -0500
Re: Oven contamination
Bev Christian
Wed, 28 Dec 2011 12:34:59 -0500
Re: PCB Design Rant - Concurrent engineering twist
Bev Christian
Fri, 23 Dec 2011 11:11:02 -0500
New Sender Bill Kunkle
Re: Nickel Stencils
Bill Kunkle
Fri, 9 Dec 2011 11:04:07 -0500
New Sender Blair Hogg
Re: cracked capacitors
Blair Hogg
Wed, 14 Dec 2011 09:41:54 -0600
Re: Holiday wishes
Blair Hogg
Fri, 23 Dec 2011 14:52:32 -0600
Re: Real World Acceptability of Solder Balls.
Blair Hogg
Thu, 1 Dec 2011 13:47:02 -0600
New Sender Blomberg, Rainer (FL51)
Re: Spaceflight (NASA) Approved CC
Blomberg, Rainer (FL51)
Fri, 2 Dec 2011 20:49:51 +0000
New Sender Brian Ellis
My video Christmas card
Brian Ellis
Sun, 11 Dec 2011 09:53:58 +0200
Re: My video Christmas card
Brian Ellis
Sun, 11 Dec 2011 18:32:08 +0200
Re: NTC Friday Element Quiz - the Answer
Brian Ellis
Sat, 17 Dec 2011 18:47:35 +0200
Re: NTC Friday Element Quiz - the Question
Brian Ellis
Thu, 1 Dec 2011 08:46:16 +0200
Re: NTC Friday Element Quiz - the Question
Brian Ellis
Fri, 9 Dec 2011 15:29:49 +0200
Re: NTC Friday Element Quiz - the Question
Brian Ellis
Fri, 16 Dec 2011 09:23:41 +0200
Re: PCB Design Rant
Brian Ellis
Thu, 22 Dec 2011 17:00:15 +0200
Re: PCB Design Rant - Concurrent engineering twist
Brian Ellis
Fri, 23 Dec 2011 17:58:00 +0200
Re: Soldermask, Receiving Inspection Photos
Brian Ellis
Thu, 29 Dec 2011 18:22:05 +0200
New Sender Brian Stumm
Re: pcb
Brian Stumm
Thu, 29 Dec 2011 09:00:17 -0800
New Sender Brown, Dock
Re: NTC Friday Element Quiz - the Question
Brown, Dock
Thu, 1 Dec 2011 17:20:15 -0800
New Sender Burl
Re: Bill Kenyon passed away---UPDATE FROM HIS DAUGHTER LIZ
Burl
Sat, 31 Dec 2011 11:02:11 -0500
New Sender Christopher Young
Thermal profile for lead free
Christopher Young
Tue, 13 Dec 2011 10:17:28 +0000
New Sender Craig Sullivan
Nickel Stencils
Craig Sullivan
Fri, 9 Dec 2011 09:25:29 -0500
Storage Systems
Craig Sullivan
Mon, 5 Dec 2011 14:12:47 -0500
New Sender David D. Hillman
NTC Friday Element Quiz - the Answer
David D. Hillman
Fri, 2 Dec 2011 15:56:42 -0600
NTC Friday Element Quiz - the Answer
David D. Hillman
Fri, 9 Dec 2011 17:03:30 -0600
NTC Friday Element Quiz - the Answer
David D. Hillman
Fri, 16 Dec 2011 17:35:35 -0600
Re: NTC Friday Element Quiz - the Answer
David D. Hillman
Thu, 29 Dec 2011 10:27:37 -0600
Re: NTC Friday Element Quiz - the Question
David D. Hillman
Thu, 1 Dec 2011 08:46:16 -0600
NTC Friday Element Quiz - the Question
David D. Hillman
Thu, 1 Dec 2011 16:36:13 -0600
NTC Friday Element Quiz - the Question
David D. Hillman
Fri, 9 Dec 2011 07:07:11 -0600
NTC Friday Element Quiz - the Question
David D. Hillman
Thu, 15 Dec 2011 16:29:01 -0600
NTC Re: [TN] QFP center slug over signal vias
David D. Hillman
Tue, 20 Dec 2011 12:52:28 -0600
Re: QFP center slug over signal vias
David D. Hillman
Tue, 20 Dec 2011 12:51:01 -0600
Re: TI Paste Recommendations
David D. Hillman
Tue, 13 Dec 2011 15:53:12 -0600
Re: TI Paste Recommendations
David D. Hillman
Tue, 13 Dec 2011 21:03:50 -0600
New Sender Douglas Pauls
A Clumpy Christmas
Douglas Pauls
Tue, 20 Dec 2011 07:14:00 -0600
Re: Coating under connectors
Douglas Pauls
Thu, 8 Dec 2011 13:50:15 -0600
Re: Holiday wishes
Douglas Pauls
Thu, 22 Dec 2011 08:31:03 -0600
Re: NTC Apple . . .HUMOUR
Douglas Pauls
Mon, 5 Dec 2011 14:28:53 -0600
Re: NTC Friday Element Quiz - the Question
Douglas Pauls
Thu, 1 Dec 2011 11:07:00 -0600
New Sender Dwight Mattix
Re: Holiday wishes
Dwight Mattix
Thu, 22 Dec 2011 11:06:50 -0800
New Sender Ed
Holiday wishes
Ed
Thu, 22 Dec 2011 05:57:14 -0800
New Sender Eric Laroche
cracked capacitors
Eric Laroche
Tue, 13 Dec 2011 20:35:39 -0500
New Sender Frank Kimmey
Re: cracked capacitors
Frank Kimmey
Tue, 13 Dec 2011 18:13:30 -0800
Re: QFP center slug over signal vias
Frank Kimmey
Tue, 20 Dec 2011 12:43:40 -0800
New Sender Frederick Miller
Re: QFP center slug over signal vias
Frederick Miller
Wed, 21 Dec 2011 08:22:16 -0500
New Sender Garcia, Rigo (GSFC-300.0)[MANTECH SRS TECHNOLOGIES]
Re: cracked capacitors
Garcia, Rigo (GSFC-300.0)[MANTECH SRS TECHNOLOGIES]
Wed, 14 Dec 2011 09:45:15 -0600
Detailed List of Changes when changing revision of an IPC document?
Garcia, Rigo (GSFC-300.0)[MANTECH SRS TECHNOLOGIES]
Tue, 6 Dec 2011 13:49:04 -0600
Re: Detailed List of Changes when changing revision of an IPC document?
Garcia, Rigo (GSFC-300.0)[MANTECH SRS TECHNOLOGIES]
Tue, 6 Dec 2011 15:03:32 -0600
Re: Holiday wishes
Garcia, Rigo (GSFC-300.0)[MANTECH SRS TECHNOLOGIES]
Thu, 22 Dec 2011 10:40:36 -0600
New Sender Gerald Bogert
Soldering part with CUNIPDAU solder leads
Gerald Bogert
Sat, 10 Dec 2011 07:18:38 -0500
Re: Thermal profile for lead free
Gerald Bogert
Tue, 13 Dec 2011 13:29:07 -0500
Re: TI Paste Recommendations
Gerald Bogert
Tue, 13 Dec 2011 15:28:30 -0500
New Sender Glidden, Kevin
Re: Coating under connectors
Glidden, Kevin
Thu, 8 Dec 2011 15:04:22 -0500
Re: Counterfeit Component Training CDROM - free download
Glidden, Kevin
Thu, 8 Dec 2011 09:28:53 -0500
New Sender Goodyear, Patrick
Re: cracked capacitors
Goodyear, Patrick
Wed, 14 Dec 2011 21:38:18 +0000
Re: IPC-AJ-820 Requests information
Goodyear, Patrick
Tue, 13 Dec 2011 16:06:12 +0000
Re: IPC-AJ-820 Requests information
Goodyear, Patrick
Tue, 13 Dec 2011 16:28:44 +0000
Re: QFP center slug over signal vias
Goodyear, Patrick
Wed, 21 Dec 2011 15:15:46 +0000
Re: QFP center slug over signal vias
Goodyear, Patrick
Wed, 21 Dec 2011 17:03:37 +0000
Re: QFP center slug over signal vias
Goodyear, Patrick
Thu, 22 Dec 2011 00:32:16 +0000
New Sender Graham Collins
Re: Coating under connectors
Graham Collins
Thu, 8 Dec 2011 14:25:35 -0400
Re: Holiday wishes
Graham Collins
Thu, 22 Dec 2011 10:10:38 -0400
Re: NTC Friday Element Quiz - the Answer
Graham Collins
Mon, 12 Dec 2011 07:20:49 -0400
Re: NTC Friday Element Quiz - the Question
Graham Collins
Fri, 9 Dec 2011 09:29:49 -0400
New Sender Gumpert, Ben
Re: EXTERNAL: Re: [TN] TI Paste Recommendations
Gumpert, Ben
Wed, 14 Dec 2011 09:50:19 -0500
Re: Real World Acceptability of Solder Balls.
Gumpert, Ben
Thu, 1 Dec 2011 06:03:51 -0500
New Sender Guy Ramsey
Re: NTC: humorous item... Deweyism
Guy Ramsey
Wed, 21 Dec 2011 09:41:07 -0500
Re: pcb
Guy Ramsey
Thu, 29 Dec 2011 09:02:11 -0500
Re: pcb
Guy Ramsey
Thu, 29 Dec 2011 12:17:08 -0500
Re: pcb
Guy Ramsey
Thu, 29 Dec 2011 12:18:49 -0500
Re: pcb
Guy Ramsey
Thu, 29 Dec 2011 12:38:28 -0500
Re: pcb
Guy Ramsey
Thu, 29 Dec 2011 12:47:23 -0500
Re: PTH hole size "standards"
Guy Ramsey
Mon, 19 Dec 2011 11:41:10 -0500
Re: PTH hole size "standards"
Guy Ramsey
Mon, 19 Dec 2011 12:00:03 -0500
Re: QFP center slug over signal vias
Guy Ramsey
Wed, 21 Dec 2011 07:45:12 -0500
Re: QFP center slug over signal vias
Guy Ramsey
Wed, 21 Dec 2011 08:03:50 -0500
Re: QFP center slug over signal vias
Guy Ramsey
Wed, 21 Dec 2011 08:30:22 -0500
Re: QFP center slug over signal vias
Guy Ramsey
Wed, 21 Dec 2011 10:32:53 -0500
Re: Soldermask, Receiving Inspection Photos
Guy Ramsey
Thu, 29 Dec 2011 12:13:54 -0500
New Sender Ilknur Baylakoglu
pcb
Ilknur Baylakoglu
Thu, 29 Dec 2011 04:07:30 -0600
New Sender Inge Hernefjord
Re: PCB Design Rant
Inge Hernefjord
Tue, 27 Dec 2011 16:48:43 +0100
Re: PCB Design Rant
Inge Hernefjord
Thu, 29 Dec 2011 19:53:52 +0100
New Sender Inge
Re: PCB Design Rant
Inge
Sun, 25 Dec 2011 22:21:55 +0100
New Sender Ioan Tempea
Coating under connectors
Ioan Tempea
Thu, 8 Dec 2011 13:04:27 -0500
Re: PCB Design Rant - Concurrent engineering twist
Ioan Tempea
Fri, 23 Dec 2011 10:45:03 -0500
Re: PCB Design Rant - Concurrent engineering twist
Ioan Tempea
Fri, 23 Dec 2011 11:22:42 -0500
New Sender Jack Olson
Re: Coating under connectors
Jack Olson
Fri, 9 Dec 2011 08:58:43 -0600
Re: IPC-AJ-820 Requests information
Jack Olson
Wed, 14 Dec 2011 09:18:16 -0600
Re: NTC Apple . . .HUMOUR
Jack Olson
Tue, 6 Dec 2011 08:56:57 -0600
Re: NTC Apple . . .HUMOUR
Jack Olson
Tue, 6 Dec 2011 11:21:00 -0600
Re: TI Paste Recommendations
Jack Olson
Wed, 14 Dec 2011 09:31:45 -0600
New Sender James Head
Re: PTH hole size "standards"
James Head
Mon, 19 Dec 2011 15:40:28 +0000
Re: QFP center slug over signal vias
James Head
Thu, 22 Dec 2011 08:08:56 +0000
New Sender Jim Carlson
Re: QFP center slug over signal vias
Jim Carlson
Tue, 20 Dec 2011 13:39:47 -0500
New Sender John Balchunas
Soldermask, Receiving Inspection Photos
John Balchunas
Thu, 29 Dec 2011 09:04:59 -0600
Re: Soldermask, Receiving Inspection Photos
John Balchunas
Thu, 29 Dec 2011 12:38:34 -0600
New Sender John Maxwell
Re: cracked capacitors
John Maxwell
Tue, 13 Dec 2011 22:12:56 -0800
New Sender Jonathan Griffiths Merlin Circuit Technology Ltd
automated response
Jonathan Griffiths Merlin Circuit Technology Ltd
Tue, 20 Dec 2011 13:15:07 +0000
New Sender Joyce Koo
Re: BGA SMD vs NSMD
Joyce Koo
Wed, 14 Dec 2011 17:52:45 -0500
Re: Holiday wishes
Joyce Koo
Thu, 22 Dec 2011 16:12:28 +0000
Re: NTC - Experimenting with new microscope camera
Joyce Koo
Tue, 6 Dec 2011 18:02:01 -0500
Re: NTC Apple . . .HUMOUR
Joyce Koo
Mon, 5 Dec 2011 15:44:46 -0500
Re: NTC Friday Element Quiz - the Question
Joyce Koo
Thu, 15 Dec 2011 18:19:13 -0500
Re: Oven contamination
Joyce Koo
Wed, 28 Dec 2011 22:26:01 +0000
Re: PCB Design Rant
Joyce Koo
Mon, 26 Dec 2011 18:51:06 +0000
Re: PCB Design Rant
Joyce Koo
Tue, 27 Dec 2011 16:02:24 +0000
Re: QFP center slug over signal vias
Joyce Koo
Tue, 20 Dec 2011 18:32:16 +0000
Re: QFP center slug over signal vias
Joyce Koo
Tue, 20 Dec 2011 19:09:40 +0000
Re: QFP center slug over signal vias
Joyce Koo
Tue, 20 Dec 2011 22:57:47 +0000
Re: QFP center slug over signal vias
Joyce Koo
Wed, 21 Dec 2011 22:23:00 +0000
Re: QFP center slug over signal vias
Joyce Koo
Wed, 21 Dec 2011 22:36:21 +0000
Re: Real World Acceptability of Solder Balls.
Joyce Koo
Thu, 1 Dec 2011 10:15:33 -0500
Re: Real World Acceptability of Solder Balls.
Joyce Koo
Thu, 1 Dec 2011 13:38:21 -0500
Re: Thermal profile for lead free
Joyce Koo
Tue, 13 Dec 2011 06:37:04 -0500
Re: TI Paste Recommendations
Joyce Koo
Tue, 13 Dec 2011 15:39:56 -0500
Re: TI Paste Recommendations
Joyce Koo
Wed, 14 Dec 2011 10:00:29 -0500
Re: TI Paste Recommendations
Joyce Koo
Thu, 15 Dec 2011 12:20:34 -0500
New Sender Karen Tellefsen
Flying probe pintester
Karen Tellefsen
Thu, 8 Dec 2011 13:43:06 -0500
New Sender Keach Sasamori
IPC-AJ-820 Requests information
Keach Sasamori
Fri, 9 Dec 2011 18:28:32 +0000
Testing
Keach Sasamori
Fri, 9 Dec 2011 18:06:47 +0000
New Sender Keith Calhoun
Oven contamination
Keith Calhoun
Wed, 28 Dec 2011 08:37:54 -0500
New Sender Kris Roberson
IPC-AJ-820 Committee requests Information
Kris Roberson
Fri, 9 Dec 2011 17:50:55 +0000
IPC-AJ-820 Requests information
Kris Roberson
Fri, 9 Dec 2011 17:33:34 +0000
IPC-AJ-820 Requests information
Kris Roberson
Fri, 9 Dec 2011 17:39:27 +0000
IPC-AJ-820 Requests Information (try number 3 for posting...)
Kris Roberson
Fri, 9 Dec 2011 17:54:01 +0000
New Sender Larry Dzaugis
Re: PTH hole size "standards"
Larry Dzaugis
Mon, 26 Dec 2011 10:34:52 -0600
Re: Thermal profile for lead free
Larry Dzaugis
Tue, 13 Dec 2011 09:16:01 -0600
Re: TI Paste Recommendations
Larry Dzaugis
Tue, 13 Dec 2011 15:17:45 -0600
Re: TI Paste Recommendations
Larry Dzaugis
Wed, 14 Dec 2011 09:21:56 -0600
Re: TI Paste Recommendations
Larry Dzaugis
Thu, 15 Dec 2011 10:36:12 -0600
Re: TI Paste Recommendations
Larry Dzaugis
Thu, 15 Dec 2011 15:41:03 -0600
New Sender Leif Laerum
Re: Thermal profile for lead free
Leif Laerum
Wed, 14 Dec 2011 10:12:49 -0600
Re: TI Paste Recommendations
Leif Laerum
Wed, 14 Dec 2011 10:28:23 -0600
New Sender Leland Woodall
Re: NTC - Experimenting with new microscope camera
Leland Woodall
Tue, 6 Dec 2011 17:47:33 +0000
Re: Thermal profile for lead free
Leland Woodall
Tue, 13 Dec 2011 11:46:28 +0000
New Sender Louis Hart
Re: NTC Holiday wishes
Louis Hart
Thu, 22 Dec 2011 15:07:29 +0000
New Sender Mark Larson
Re: BGA SMD vs NSMD
Mark Larson
Wed, 14 Dec 2011 15:50:54 -0600
Re: BGA SMD vs NSMD
Mark Larson
Fri, 16 Dec 2011 13:34:29 -0600
Re: cracked capacitors
Mark Larson
Wed, 14 Dec 2011 16:05:28 -0600
New Sender Matthias Mansfeld
(NTC) once on TN, was: Re: [TN] PCB Design Rant
Matthias Mansfeld
Tue, 27 Dec 2011 19:10:23 +0100
Re: BGA SMD vs NSMD
Matthias Mansfeld
Thu, 15 Dec 2011 19:27:52 +0100
Re: BGA SMD vs NSMD
Matthias Mansfeld
Thu, 15 Dec 2011 22:54:27 +0100
Re: TI Paste Recommendations
Matthias Mansfeld
Wed, 14 Dec 2011 16:48:26 +0100
Re: TI Paste Recommendations
Matthias Mansfeld
Thu, 15 Dec 2011 04:24:23 +0100
New Sender Mike Buetow
Re: PCB Design Rant
Mike Buetow
Thu, 29 Dec 2011 17:12:14 -0500
New Sender Mike Fenner
Re: NTC Friday Element Quiz - the Answer
Mike Fenner
Sat, 17 Dec 2011 12:16:32 +0000
Re: NTC Friday Element Quiz - the Answer
Mike Fenner
Sat, 17 Dec 2011 14:48:36 +0000
Re: NTC Friday Element Quiz - the Answer
Mike Fenner
Sun, 18 Dec 2011 00:39:30 +0000
Re: NTC Friday Element Quiz - the Answer
Mike Fenner
Thu, 29 Dec 2011 10:33:47 +0000
Re: NTC Friday Element Quiz - the Question
Mike Fenner
Fri, 16 Dec 2011 08:05:31 +0000
Re: Oven contamination
Mike Fenner
Thu, 29 Dec 2011 10:19:52 +0000
Re: PCB Design Rant
Mike Fenner
Thu, 29 Dec 2011 10:19:52 +0000
Re: QFP center slug over signal vias
Mike Fenner
Wed, 21 Dec 2011 11:12:41 +0000
Re: QFP center slug over signal vias
Mike Fenner
Wed, 21 Dec 2011 14:26:19 +0000
Re: Soldering part with CUNIPDAU solder leads
Mike Fenner
Mon, 12 Dec 2011 21:05:07 +0000
New Sender Nigel Burtt
Counterfeit Component Training CDROM - free download
Nigel Burtt
Thu, 8 Dec 2011 03:54:51 -0600
Re: Thermal profile for lead free
Nigel Burtt
Wed, 14 Dec 2011 03:33:12 -0600
New Sender Pete
Re: BGA SMD vs NSMD
Pete
Thu, 15 Dec 2011 09:39:34 -0600
Re: PCB Design Rant
Pete
Fri, 23 Dec 2011 08:56:01 -0600
Re: PTH hole size "standards"
Pete
Tue, 20 Dec 2011 08:44:54 -0600
Re: QFP center slug over signal vias
Pete
Wed, 21 Dec 2011 10:30:18 -0600
Re: Real World Acceptability of Solder Balls.
Pete
Thu, 1 Dec 2011 09:00:16 -0600
Re: TI Paste Recommendations
Pete
Wed, 14 Dec 2011 08:13:25 -0600
Re: TI Paste Recommendations
Pete
Wed, 14 Dec 2011 09:11:06 -0600
Re: TI Paste Recommendations
Pete
Thu, 15 Dec 2011 09:10:50 -0600
New Sender Phil Bavaro
Re: BGA SMD vs NSMD
Phil Bavaro
Wed, 14 Dec 2011 07:47:41 -0800
Re: Coating under connectors
Phil Bavaro
Thu, 8 Dec 2011 11:17:09 -0800
Re: Holiday wishes
Phil Bavaro
Thu, 22 Dec 2011 08:05:16 -0800
Re: NTC Friday Element Quiz - the Answer
Phil Bavaro
Fri, 16 Dec 2011 16:24:17 -0800
Re: NTC Friday Element Quiz - the Question
Phil Bavaro
Thu, 15 Dec 2011 15:19:33 -0800
Re: PTH hole size "standards"
Phil Bavaro
Mon, 19 Dec 2011 07:39:59 -0800
Re: PTH hole size "standards"
Phil Bavaro
Mon, 19 Dec 2011 09:31:44 -0800
QFP center slug over signal vias
Phil Bavaro
Tue, 20 Dec 2011 10:26:14 -0800
Re: QFP center slug over signal vias
Phil Bavaro
Tue, 20 Dec 2011 10:39:01 -0800
Re: QFP center slug over signal vias
Phil Bavaro
Tue, 20 Dec 2011 11:51:40 -0800
New Sender Phil Kinner
Re: NTC Friday Element Quiz - the Question
Phil Kinner
Fri, 16 Dec 2011 08:49:34 +0000
New Sender Phil Nutting
NTC: humorous item... Deweyism
Phil Nutting
Tue, 20 Dec 2011 16:56:16 -0500
PTH hole size "standards"
Phil Nutting
Mon, 19 Dec 2011 10:31:01 -0500
Re: PTH hole size "standards"
Phil Nutting
Mon, 19 Dec 2011 10:41:45 -0500
Re: PTH hole size "standards"
Phil Nutting
Mon, 19 Dec 2011 10:42:41 -0500
Re: PTH hole size "standards"
Phil Nutting
Mon, 19 Dec 2011 11:51:37 -0500
Re: PTH hole size "standards"
Phil Nutting
Mon, 19 Dec 2011 12:46:27 -0500
New Sender Post, Scott E
Re: BGA SMD vs NSMD
Post, Scott E
Fri, 16 Dec 2011 12:36:56 +0000
Re: BGA SMD vs NSMD
Post, Scott E
Fri, 16 Dec 2011 20:21:08 +0000
New Sender Reuven Rokah
Re: cracked capacitors
Reuven Rokah
Wed, 14 Dec 2011 19:42:11 +0200
Re: Flying probe pintester
Reuven Rokah
Thu, 8 Dec 2011 21:09:08 +0200
Re: Holiday wishes
Reuven Rokah
Sun, 25 Dec 2011 08:52:48 +0200
Re: NTC Friday Element Quiz - the Question
Reuven Rokah
Fri, 9 Dec 2011 19:47:06 +0200
Re: NTC Friday Element Quiz - the Question
Reuven Rokah
Fri, 16 Dec 2011 08:45:10 +0200
Re: Oven contamination
Reuven Rokah
Wed, 28 Dec 2011 19:51:08 +0200
Re: Oven contamination
Reuven Rokah
Wed, 28 Dec 2011 20:04:54 +0200
Re: Real World Acceptability of Solder Balls.
Reuven Rokah
Thu, 1 Dec 2011 21:31:26 +0200
Re: Thermal profile for lead free
Reuven Rokah
Thu, 15 Dec 2011 21:11:22 +0200
New Sender Rex Waygood
Re: BGA SMD vs NSMD
Rex Waygood
Wed, 14 Dec 2011 16:37:40 +0000
Re: BGA SMD vs NSMD
Rex Waygood
Wed, 14 Dec 2011 18:13:08 +0000
PCB Design Rant
Rex Waygood
Thu, 22 Dec 2011 11:59:51 +0000
New Sender Richard D. Krug
AXI Experience
Richard D. Krug
Thu, 15 Dec 2011 12:19:36 -0500
Re: TI Paste Recommendations
Richard D. Krug
Thu, 15 Dec 2011 11:36:02 -0500
New Sender Richard Hatano
Re: Holiday wishes
Richard Hatano
Thu, 22 Dec 2011 08:30:45 -0800
New Sender Rick Bell
Re: NTC Apple . . .HUMOUR
Rick Bell
Tue, 6 Dec 2011 09:32:58 -0600
New Sender Rivera, Raye
Re: cracked capacitors
Rivera, Raye
Wed, 14 Dec 2011 08:59:08 -0800
New Sender Robert Kondner
Re: BGA SMD vs NSMD
Robert Kondner
Thu, 15 Dec 2011 16:16:06 -0500
Re: IPC-AJ-820 Requests information
Robert Kondner
Tue, 13 Dec 2011 12:13:35 -0500
Re: NTC - Experimenting with new microscope camera
Robert Kondner
Wed, 7 Dec 2011 11:45:19 -0500
Re: NTC - Experimenting with new microscope camera
Robert Kondner
Wed, 7 Dec 2011 12:10:55 -0500
Re: NTC Apple . . .HUMOUR
Robert Kondner
Mon, 5 Dec 2011 15:57:46 -0500
Re: NTC Apple . . .HUMOUR
Robert Kondner
Mon, 5 Dec 2011 16:43:22 -0500
Re: NTC Apple . . .HUMOUR
Robert Kondner
Tue, 6 Dec 2011 11:31:43 -0500
Re: PCB Design Rant
Robert Kondner
Thu, 22 Dec 2011 13:48:09 -0500
Re: PCB Design Rant
Robert Kondner
Thu, 22 Dec 2011 14:33:56 -0500
Re: Storage Systems
Robert Kondner
Mon, 5 Dec 2011 14:40:09 -0500
Re: TI Paste Recommendations
Robert Kondner
Tue, 13 Dec 2011 16:33:32 -0500
Re: TI Paste Recommendations
Robert Kondner
Wed, 14 Dec 2011 09:53:58 -0500
New Sender Robert Wolfe
Re: PCB Design Rant
Robert Wolfe
Thu, 22 Dec 2011 10:36:07 -0500
Re: PCB Design Rant
Robert Wolfe
Thu, 22 Dec 2011 14:02:59 -0500
Re: PCB Design Rant
Robert Wolfe
Thu, 22 Dec 2011 14:15:55 -0500
Re: PCB Design Rant
Robert Wolfe
Thu, 22 Dec 2011 14:46:25 -0500
New Sender SALA GABRIELE
R: [TN] Oven contamination
SALA GABRIELE
Wed, 28 Dec 2011 16:05:33 +0100
New Sender Stadem, Richard D.
Re: BGA SMD vs NSMD
Stadem, Richard D.
Wed, 14 Dec 2011 11:54:32 -0600
Re: BGA SMD vs NSMD
Stadem, Richard D.
Fri, 16 Dec 2011 07:41:25 -0600
Re: IPC-AJ-820 Requests Information (try number 3 for posting...)
Stadem, Richard D.
Mon, 12 Dec 2011 09:18:07 -0600
Re: NTC - Experimenting with new microscope camera
Stadem, Richard D.
Tue, 6 Dec 2011 13:27:34 -0600
Re: Oven contamination
Stadem, Richard D.
Wed, 28 Dec 2011 11:57:53 -0600
Re: QFP center slug over signal vias
Stadem, Richard D.
Tue, 20 Dec 2011 12:49:37 -0600
Re: QFP center slug over signal vias
Stadem, Richard D.
Tue, 20 Dec 2011 12:50:22 -0600
Re: QFP center slug over signal vias
Stadem, Richard D.
Tue, 20 Dec 2011 14:55:05 -0600
Re: Soldering part with CUNIPDAU solder leads
Stadem, Richard D.
Mon, 12 Dec 2011 09:23:40 -0600
Re: TI Paste Recommendations
Stadem, Richard D.
Tue, 13 Dec 2011 15:01:20 -0600
Re: TI Paste Recommendations
Stadem, Richard D.
Tue, 13 Dec 2011 16:12:54 -0600
Re: TI Paste Recommendations
Stadem, Richard D.
Wed, 14 Dec 2011 09:56:47 -0600
Re: TI Paste Recommendations
Stadem, Richard D.
Thu, 15 Dec 2011 13:20:54 -0600
New Sender Steve Gregory
Re: A Clumpy Christmas
Steve Gregory
Tue, 20 Dec 2011 10:50:35 -0500
Re: NTC - Experimenting with new microscope camera
Steve Gregory
Wed, 7 Dec 2011 08:55:54 -0500
Re: PTH hole size "standards"
Steve Gregory
Mon, 19 Dec 2011 12:19:51 -0500
Re: PTH hole size "standards"
Steve Gregory
Mon, 19 Dec 2011 12:55:49 -0500
Re: QFP center slug over signal vias
Steve Gregory
Tue, 20 Dec 2011 14:46:22 -0500
Re: QFP center slug over signal vias
Steve Gregory
Tue, 20 Dec 2011 15:02:35 -0500
Re: QFP center slug over signal vias
Steve Gregory
Tue, 20 Dec 2011 17:23:47 -0500
New Sender Steve Mikell
Re: NTC Friday Element Quiz - the Question
Steve Mikell
Thu, 1 Dec 2011 20:14:08 -0500
New Sender Steven Creswick
NTC - Experimenting with new microscope camera
Steven Creswick
Tue, 6 Dec 2011 12:19:52 -0500
Re: NTC - Experimenting with new microscope camera
Steven Creswick
Wed, 7 Dec 2011 07:37:37 -0500
Re: NTC - Experimenting with new microscope camera
Steven Creswick
Wed, 7 Dec 2011 11:26:12 -0500
Re: NTC - Experimenting with new microscope camera
Steven Creswick
Wed, 7 Dec 2011 11:49:07 -0500
Re: pcb
Steven Creswick
Thu, 29 Dec 2011 13:02:38 -0500
Re: PCB Design Rant
Steven Creswick
Thu, 22 Dec 2011 11:39:21 -0500
Re: PCB Design Rant
Steven Creswick
Tue, 27 Dec 2011 11:22:08 -0500
Re: PCB Design Rant - reply from Joyce
Steven Creswick
Tue, 27 Dec 2011 12:10:38 -0500
Re: QFP center slug over signal vias
Steven Creswick
Wed, 21 Dec 2011 08:48:39 -0500
New Sender Tan Geok Ang
Re: Bill Kenyon passed away
Tan Geok Ang
Fri, 2 Dec 2011 02:36:14 +0000
Re: NTC Apple . . .HUMOUR
Tan Geok Ang
Tue, 6 Dec 2011 00:43:24 +0000
New Sender Terry Munson
Re: Oven contamination
Terry Munson
Wed, 28 Dec 2011 14:20:34 -0500
New Sender Thayer, Wayne - IIW
Re: NTC - Experimenting with new microscope camera
Thayer, Wayne - IIW
Tue, 6 Dec 2011 17:36:05 -0500
New Sender Upton, Shawn
Re: QFP center slug over signal vias
Upton, Shawn
Wed, 21 Dec 2011 13:36:53 +0000
New Sender Victor Hernandez
Re: Press Pin Fits connector
Victor Hernandez
Tue, 20 Dec 2011 10:43:16 -0600
New Sender Vladimir Igoshev
Re: Oven contamination
Vladimir Igoshev
Sat, 31 Dec 2011 12:26:15 -0500
New Sender Whittaker, Dewey (EHCOE)
Re: Detailed List of Changes when changing revision of an IPC document?
Whittaker, Dewey (EHCOE)
Tue, 6 Dec 2011 19:58:49 +0000
Re: Detailed List of Changes when changing revision of an IPC document?
Whittaker, Dewey (EHCOE)
Tue, 6 Dec 2011 21:19:54 +0000
Re: Nickel Stencils
Whittaker, Dewey (EHCOE)
Fri, 9 Dec 2011 14:43:49 +0000
NTC Apple . . .HUMOUR
Whittaker, Dewey (EHCOE)
Mon, 5 Dec 2011 20:19:12 +0000
Re: NTC Apple . . .HUMOUR
Whittaker, Dewey (EHCOE)
Mon, 5 Dec 2011 20:58:03 +0000
Re: NTC Apple . . .HUMOUR
Whittaker, Dewey (EHCOE)
Mon, 5 Dec 2011 21:06:49 +0000
Re: NTC Friday Element Quiz - the Question
Whittaker, Dewey (EHCOE)
Thu, 1 Dec 2011 15:06:33 +0000
Re: Real World Acceptability of Solder Balls.
Whittaker, Dewey (EHCOE)
Thu, 1 Dec 2011 20:19:04 +0000
FW: [TN] Real World Acceptability of Solder Balls.
Whittaker, Dewey (EHCOE)
Thu, 1 Dec 2011 20:43:46 +0000
New Sender William Noel
BGA SMD vs NSMD
William Noel
Wed, 14 Dec 2011 05:43:44 -0600
TI Paste Recommendations
William Noel
Tue, 13 Dec 2011 13:51:42 -0600
New Sender Woolley, Mark D. (Mark)
Re: NTC Friday Element Quiz - the Question
Woolley, Mark D. (Mark)
Thu, 1 Dec 2011 07:56:16 -0700

ATOM RSS1 RSS2