TECHNET Archives

December 2011

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Joyce Koo <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Joyce Koo <[log in to unmask]>
Date:
Tue, 6 Dec 2011 18:02:01 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (1 lines)
Since it is an old board, is it Pb-sn lead and soldered on lead free temp?
--------------------------
Sent using BlackBerry


----- Original Message -----
From: Thayer, Wayne - IIW [mailto:[log in to unmask]]
Sent: Tuesday, December 06, 2011 05:36 PM
To: [log in to unmask] <[log in to unmask]>
Subject: Re: [TN] NTC - Experimenting with new microscope camera

I think Richard's on the right track with the solder plated leads.  That's all you need to make this happen:  During reflow the molding compound puts pressure on molten solder on the lead, forcing the solder to "squirt" out onto the lead which has no flux on it, so the solder beads up on top of the oxides.

This phenomenon is the bane of flipchips: if the solder joints can find a void (such as may happen due to poor adhesion between underfill and the surface of the die or the surface of solder mask), then solder will "squirt" in causing shorts.

On your capacitor, it is probably no big deal except that you have an easier path for moisture to get in and do nasty things.

Wayne Thayer

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Stadem, Richard D.
Sent: Tuesday, December 06, 2011 2:28 PM
To: [log in to unmask]
Subject: Re: [TN] NTC - Experimenting with new microscope camera

Not necessarily the supplier, at least not directly.

That type of solder beading, for lack of a better term, shows up like that during tinning/plating processes. The reason for it is due to residues from the encapsulation or molding on the lead near the body that prevent solder wetting. Those may be droplets of non-wetted solder from tinning, not necessarily solder squeeze-out from under the molded package. If it was solder from under the molded package, why did it not wet out onto the lead?
But no matter the source of the solder, it showed up as an issue due to poor solderability in the area where the lead enters the package body.

Also consider the leads may have been stamped from a sheet of metal that had been pre-coated with solder, in which case the squeeze-out could occur during reflow soldering later.

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Leland Woodall
Sent: Tuesday, December 06, 2011 11:48 AM
To: [log in to unmask]
Subject: Re: [TN] NTC - Experimenting with new microscope camera

I've seen this before as well on similar diode packages.  I don't think we were ever able to discover the actual root cause, though the supplier would almost certainly be the culprit.

Leland



-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Steven Creswick
Sent: Tuesday, December 06, 2011 12:20 PM
To: [log in to unmask]
Subject: [TN] NTC - Experimenting with new microscope camera

All,

I recently purchased a microscope camera and have been trying it out on various items.

Have placed two photos on the IPC website which I believe illustrate a tin [or solder plated] lead on which the plating has reflowed and squirted out from beneath the mold compound.

Have seen similar manifestations with improperly processed solder & glob-topped assemblies.

http://ipc-technet.groupsite.com/gallery/22093  filed alphabetically under folder name - Tin Plated Leads

Anyone else have other ideas?

Please keep in mind that this an old modem board of unknown chronological vintage that I had in my 'scrap bin'.  It just happened to be the subject of my scrutiny.

I see no evidence of solder balls, etc on the board.

Steve




______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 16.0 To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives For additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

________________________________

“Confidentiality Notice:
This transmission (including any attachments) may contain confidential information belonging to the sender and is intended only for the use of the party or entity to which it is addressed. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, retention or the taking of action in reliance on the contents of this transmission is strictly prohibited. If you have received this transmission in error, please immediately notify the sender and erase all information and attachments.”

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________


---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 16.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
For additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________


---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 16.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
For additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

This e-mail and any files transmitted with it may be proprietary and are intended solely for the use of the individual or entity to whom they are addressed. If you have received this e-mail in error please notify the sender.
Please note that any views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of Exelis Inc. The recipient should check this e-mail and any attachments for the presence of viruses. Exelis Inc. accepts no liability for any damage caused by any virus transmitted by this e-mail.

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________


---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 16.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
For additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

---------------------------------------------------------------------
This transmission (including any attachments) may contain confidential information, privileged material (including material protected by the solicitor-client or other applicable privileges), or constitute non-public information. Any use of this information by anyone other than the intended recipient is prohibited. If you have received this transmission in error, please immediately reply to the sender and delete this information from your system. Use, dissemination, distribution, or reproduction of this transmission by unintended recipients is not authorized and may be unlawful.

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________




---------------------------------------------------

Technet Mail List provided as a service by IPC using LISTSERV 16.0

To unsubscribe, send a message to [log in to unmask] with following text in

the BODY (NOT the subject field): SIGNOFF Technet

To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)

To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest

Search the archives of previous posts at: http://listserv.ipc.org/archives

For additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815

-----------------------------------------------------


ATOM RSS1 RSS2