TECHNET Archives

July 2008

TechNet@IPC.ORG
Options: Hide Table of Contents

"Chk this out" questions answered (2 Messages)
(NTC) But Relevant (7 Messages)
Anodizing Surface (7 Messages)
Antw: [TN] Silver-Palladium termination SMT solder problems (3 Messages)
Attention Designers... This is your opportunity to get up-to-date in design! (1 Message)
Board Strain with Lead Free? (2 Messages)
Bulging Cap (6 Messages)
Ceramic Cap Value (10 Messages)
Ceramic caps (38 Messages)
Ceramic Varistor Test Failures (5 Messages)
Check this out if you will (10 Messages)
Cleaning WS fluxes and other evil (5 Messages)
Component Lacing Standards? (1 Message)
Conformal Coating (9 Messages)
Conformal Coating Waste (8 Messages)
Costs of lead free (1 Message)
Countefeit Components (2 Messages)
Cupric & Cobra-Bond question (3 Messages)
De-ionised water wash (3 Messages)
Dow buys Rohm and Haas (6 Messages)
Electrical Test Failures (5 Messages)
ENIG PLATING QUALITY (2 Messages)
Flex specifications - tolerance on hole size (19 Messages)
High Performance Electronics Assembly Cleaning Symposium, Chicago, Illinois (1 Message)
Hurry and Register today for IPC's Back to the Basics Summer School Webcast Series! (2 Messages)
Immersion Tin Problem (12 Messages)
Indelible marking (13 Messages)
Inspection of bottom only terminations / process verification (3 Messages)
IPC 7711/7721 training (3 Messages)
IPC Advanced Packaging Webcast Series in August 2008 (1 Message)
IPC HDI Technology Conference, October 6-8, 2008, Dallas, Texas (1 Message)
IPC-6012A - allowable conductor width reduction interpretation? (3 Messages)
Join IPC at a design-related event on the east coast! (1 Message)
Join IPC in Maple Plain, Minnesota for these upcoming workshops! (1 Message)
Last Chance to Register today for upcoming July Fabrication Workshops - Hosted by OMG Electronic Chemicals, Inc. (1 Message)
Lead-free soldering of electrolytic caps (14 Messages)
looking for ENiG photos (47 Messages)
Max time allowed between soldering and cleaning (3 Messages)
Measuring Scores? (4 Messages)
Mechanical damage to BGA (20 Messages)
mechanical hold-down for PLCC-44 IC in socket (1 Message)
PCB color (9 Messages)
PCB Inner layer shifting (10 Messages)
PCB tolerances after reflow (3 Messages)
Plated Wire in Wedge Bonding (4 Messages)
Press-fit connectors (2 Messages)
Question on Timeliness of J-STD-001D Ionic Contamination Cleanliness Testing (6 Messages)
Read this whole thing (10 Messages)
Register today for IPC's Advanced Packaging Webcast Series (2 Messages)
Repair Need for Inverted Chip Resistors (8 Messages)
Robotics Engineer Needed (1 Message)
Searching for Wavesolder Process Engineer (1 Message)
Silver-Palladium termination SMT solder problems (5 Messages)
Solder balls (15 Messages)
Solder mask (1 Message)
Solder Paste with craters. (34 Messages)
Solithane coating dewetting (5 Messages)
Thermal header Solder attachment Guidelines (2 Messages)
They solder well... But they don't work! (12 Messages)
Trinocular Scope With Display (10 Messages)
Trinocular Scope With Display - Tin Whiskers? (4 Messages)
Upcoming IPC design-related workshops on the east coast! (1 Message)
Use of QFN devices in high reliability applications (10 Messages)
Washing dirty conformally coated boards (15 Messages)
White Soldermask turning yellow (1 Message)
[DC] Check this out if you will (5 Messages)
[LF] FW: IPC Meeting Brussels (1 Message)
[LF] [TN] SN100 for Reflow Application (15 Messages)
[NTC]: Read this whole thing (5 Messages)
[SMART] REACH consultation (2 Messages)

Subject Sorted by Subject, Most Recent First

From

Date
New Thread "Chk this out" questions answered
"Chk this out" questions answered
Barbara Burcham
Tue, 1 Jul 2008 16:39:25 -0500
Re: "Chk this out" questions answered
Kathy Kuhlow
Tue, 1 Jul 2008 17:09:31 -0500
New Thread (NTC) But Relevant
(NTC) But Relevant
<>
Wed, 9 Jul 2008 14:29:52 EDT
Re: (NTC) But Relevant
Ioan Tempea
Wed, 9 Jul 2008 15:19:58 -0400
Re: (NTC) But Relevant
Dale Ritzen
Wed, 9 Jul 2008 14:27:38 -0500
Re: (NTC) But Relevant
Dharma Kemp-Bresett
Wed, 9 Jul 2008 15:42:54 -0400
Re: (NTC) But Relevant
Dale Ritzen
Wed, 9 Jul 2008 14:56:48 -0500
Re: (NTC) But Relevant
Stadem, Richard D.
Wed, 9 Jul 2008 15:36:34 -0500
Re: (NTC) But Relevant
Dharma Kemp-Bresett
Wed, 9 Jul 2008 17:12:01 -0400
New Thread Anodizing Surface
Anodizing Surface
Victor Hernandez
Thu, 24 Jul 2008 10:37:37 -0500
Re: Anodizing Surface
Fox, Ian
Thu, 24 Jul 2008 16:58:53 +0100
Re: Anodizing Surface
Phil Nutting
Thu, 24 Jul 2008 12:01:36 -0400
Re: Anodizing Surface
Ioan Tempea
Thu, 24 Jul 2008 14:29:02 -0400
Re: Anodizing Surface
Victor Hernandez
Thu, 24 Jul 2008 13:34:31 -0500
Re: Anodizing Surface
Stadem, Richard D.
Thu, 24 Jul 2008 13:53:48 -0500
Re: Anodizing Surface
John Burke
Thu, 24 Jul 2008 20:27:12 -0700
New Thread Antw: [TN] Silver-Palladium termination SMT solder problems
Antw: [TN] Silver-Palladium termination SMT solder problems
Guenter Grossmann
Thu, 3 Jul 2008 14:00:09 +0200
Re: Antw: [TN] Silver-Palladium termination SMT solder problems
Hernefjord Ingemar
Thu, 3 Jul 2008 14:23:25 +0200
Re: Antw: [TN] Silver-Palladium termination SMT solder problems
Guy Ramsey
Tue, 8 Jul 2008 16:00:56 -0400
New Thread Attention Designers... This is your opportunity to get up-to-date in design!
Attention Designers... This is your opportunity to get up-to-date in design!
Tina Nerad
Mon, 21 Jul 2008 13:19:38 -0500
New Thread Board Strain with Lead Free?
Board Strain with Lead Free?
Brian Chandler
Thu, 24 Jul 2008 06:33:24 -0500
Re: Board Strain with Lead Free?
Werner Engelmaier /*
Thu, 24 Jul 2008 11:52:00 EDT
New Thread Bulging Cap
RE: Bulging Cap
Steve Gregory
Tue, 22 Jul 2008 12:16:47 -0500
Re: RE: Bulging Cap
Stadem, Richard D.
Tue, 22 Jul 2008 12:49:58 -0500
Re: RE: Bulging Cap
Stadem, Richard D.
Tue, 22 Jul 2008 12:53:57 -0500
Re: RE: Bulging Cap
Ioan Tempea
Tue, 22 Jul 2008 15:18:09 -0400
Re: RE: Bulging Cap
John Maxwell
Tue, 22 Jul 2008 13:29:22 -0700
Re: RE: Bulging Cap
Whittaker, Dewey (EHCOE)
Tue, 29 Jul 2008 08:56:14 -0700
New Thread Ceramic Cap Value
Re: Ceramic Cap Value
Ioan Tempea
Tue, 1 Jul 2008 11:18:16 -0400
Re: Ceramic Cap Value
Rex Waygood
Tue, 1 Jul 2008 16:41:52 +0100
Re: Ceramic Cap Value
Stadem, Richard D.
Tue, 1 Jul 2008 10:42:17 -0500
Re: Ceramic Cap Value
Whittaker, Dewey (EHCOE)
Tue, 1 Jul 2008 08:57:17 -0700
Re: Ceramic Cap Value
Inge
Tue, 1 Jul 2008 11:39:11 -0700
Re: Ceramic Cap Value
- bogert
Tue, 1 Jul 2008 18:14:34 -0400
Re: Ceramic Cap Value
Guy Ramsey
Wed, 2 Jul 2008 08:33:08 -0400
Re: Ceramic Cap Value
Guy Ramsey
Wed, 2 Jul 2008 08:49:22 -0400
Re: Ceramic Cap Value
Ken Bloomquist
Wed, 2 Jul 2008 08:19:41 -0700
Re: Ceramic Cap Value
Hernefjord Ingemar
Thu, 3 Jul 2008 09:26:14 +0200
New Thread Ceramic caps
Ceramic caps
Igoshev, Vladimir
Mon, 14 Jul 2008 09:08:00 -0400
Re: Ceramic caps
Guy Ramsey
Mon, 14 Jul 2008 09:59:27 -0400
Re: Ceramic caps
Reliability Resources
Mon, 14 Jul 2008 07:09:58 -0700
Re: Ceramic caps
Igoshev, Vladimir
Mon, 14 Jul 2008 10:22:44 -0400
Re: Ceramic caps
Brian Ellis
Mon, 14 Jul 2008 17:32:23 +0300
Re: Ceramic caps
Reliability Resources
Mon, 14 Jul 2008 07:35:26 -0700
Re: Ceramic caps
Stadem, Richard D.
Mon, 14 Jul 2008 09:39:57 -0500
Re: Ceramic caps
Igoshev, Vladimir
Mon, 14 Jul 2008 11:09:34 -0400
Re: Ceramic caps
Igoshev, Vladimir
Mon, 14 Jul 2008 11:22:36 -0400
Re: Ceramic caps
Allen Maddox
Mon, 14 Jul 2008 08:19:16 -0700
Re: Ceramic caps
Eric CHRISTISON
Mon, 14 Jul 2008 16:34:59 +0100
Re: Ceramic caps
Igoshev, Vladimir
Mon, 14 Jul 2008 12:00:02 -0400
Re: Ceramic caps
Ken Bloomquist
Mon, 14 Jul 2008 09:36:33 -0700
Re: Ceramic caps
Igoshev, Vladimir
Mon, 14 Jul 2008 12:52:48 -0400
Re: Ceramic caps
Ken Bloomquist
Mon, 14 Jul 2008 10:43:03 -0700
Re: Ceramic caps
Igoshev, Vladimir
Mon, 14 Jul 2008 13:47:39 -0400
Re: Ceramic caps
Ken Bloomquist
Mon, 14 Jul 2008 11:05:19 -0700
Re: Ceramic caps
Igoshev, Vladimir
Mon, 14 Jul 2008 14:12:34 -0400
Re: Ceramic caps
Stadem, Richard D.
Mon, 14 Jul 2008 13:39:21 -0500
Re: Ceramic caps
John Maxwell
Mon, 14 Jul 2008 11:44:16 -0700
Re: Ceramic caps
Stadem, Richard D.
Mon, 14 Jul 2008 13:49:23 -0500
Re: Ceramic caps
Igoshev, Vladimir
Mon, 14 Jul 2008 14:49:16 -0400
Re: Ceramic caps
Igoshev, Vladimir
Mon, 14 Jul 2008 14:53:14 -0400
Re: Ceramic caps
Igoshev, Vladimir
Mon, 14 Jul 2008 14:54:41 -0400
Re: Ceramic caps
Stadem, Richard D.
Mon, 14 Jul 2008 14:00:52 -0500
Re: Ceramic caps
Igoshev, Vladimir
Mon, 14 Jul 2008 15:05:01 -0400
Re: Ceramic caps
Guy Ramsey
Mon, 14 Jul 2008 15:59:31 -0400
Re: Ceramic caps
Igoshev, Vladimir
Mon, 14 Jul 2008 16:04:23 -0400
Re: Ceramic caps
Gary Bremer
Mon, 14 Jul 2008 19:21:56 -0700
Re: Ceramic caps
Bob Willis
Tue, 15 Jul 2008 07:25:16 +0100
Re: Ceramic caps
Igoshev, Vladimir
Tue, 15 Jul 2008 09:06:16 -0400
Re: Ceramic caps
Rex Waygood
Tue, 15 Jul 2008 14:15:45 +0100
Re: Ceramic caps
Igoshev, Vladimir
Tue, 15 Jul 2008 09:18:43 -0400
Re: Ceramic caps
Brian Ellis
Tue, 15 Jul 2008 16:36:59 +0300
Re: Ceramic caps
Rex Waygood
Tue, 15 Jul 2008 14:40:49 +0100
Re: Ceramic caps
Igoshev, Vladimir
Tue, 15 Jul 2008 09:43:58 -0400
Re: Ceramic caps
McGlaughlin, Jeffrey A
Tue, 15 Jul 2008 09:45:34 -0400
Re: Ceramic caps
Temkin, Gregg
Wed, 16 Jul 2008 08:23:13 -0700
New Thread Ceramic Varistor Test Failures
Ceramic Varistor Test Failures
John Anselmo
Tue, 29 Jul 2008 15:08:50 -0600
Re: Ceramic Varistor Test Failures
Stadem, Richard D.
Tue, 29 Jul 2008 16:40:04 -0500
Re: Ceramic Varistor Test Failures
Inge
Wed, 30 Jul 2008 10:56:12 -0700
Re: Ceramic Varistor Test Failures
Whittaker, Dewey (EHCOE)
Wed, 30 Jul 2008 11:20:36 -0700
Re: Ceramic Varistor Test Failures
John Anselmo
Wed, 30 Jul 2008 16:56:39 -0600
New Thread Check this out if you will
Check this out if you will
Barbara Burcham
Tue, 1 Jul 2008 11:25:22 -0500
Re: Check this out if you will
Werner Engelmaier /*
Tue, 1 Jul 2008 13:35:05 EDT
Re: Check this out if you will
Joe Lara (Select Circuits)
Tue, 1 Jul 2008 13:37:43 -0400
Re: Check this out if you will
Leland Woodall
Tue, 1 Jul 2008 13:38:53 -0400
Re: Check this out if you will
Gervascio, Thomas
Tue, 1 Jul 2008 14:54:41 -0400
Re: Check this out if you will
Inge
Tue, 1 Jul 2008 12:04:04 -0700
Re: Check this out if you will
Dave Dixon
Tue, 1 Jul 2008 14:19:57 -0500
Re: Check this out if you will
John Burke
Tue, 1 Jul 2008 12:59:24 -0700
Re: Check this out if you will
Ken Bloomquist
Tue, 1 Jul 2008 13:02:09 -0700
Re: Check this out if you will
Blair Hogg
Wed, 2 Jul 2008 04:55:24 -0500
New Thread Cleaning WS fluxes and other evil
Cleaning WS fluxes and other evil
Jean-François Bissonnette
Fri, 25 Jul 2008 09:58:43 -0400
Re: Cleaning WS fluxes and other evil
Kevin Glidden
Fri, 25 Jul 2008 12:04:30 -0400
Re: Cleaning WS fluxes and other evil
Brian Ellis
Fri, 25 Jul 2008 19:12:00 +0300
Re: Cleaning WS fluxes and other evil
Joyce Koo
Fri, 25 Jul 2008 12:40:19 -0400
Re: Cleaning WS fluxes and other evil
Mike Fenner
Mon, 28 Jul 2008 10:59:51 +0100
New Thread Component Lacing Standards?
Component Lacing Standards?
Steve Gregory
Wed, 30 Jul 2008 14:00:33 -0500
New Thread Conformal Coating
Conformal Coating
Craig Sullivan
Tue, 8 Jul 2008 10:53:27 -0500
Re: Conformal Coating
Graham Naisbitt
Wed, 9 Jul 2008 17:22:28 +0100
Re: Conformal Coating
Grunde Gjertsen
Thu, 10 Jul 2008 07:52:05 +0200
conformal coating
Wilson, Bob
Fri, 18 Jul 2008 10:48:12 -0700
Re: conformal coating
Ted Tontis
Fri, 18 Jul 2008 13:31:19 -0500
Re: conformal coating
Wilson, Bob
Fri, 18 Jul 2008 11:36:53 -0700
Re: conformal coating
Gary Robinson
Fri, 18 Jul 2008 13:37:38 -0500
Re: conformal coating
- bogert
Sat, 19 Jul 2008 08:05:04 -0400
Re: conformal coating
Temkin, Gregg
Mon, 21 Jul 2008 07:50:46 -0700
New Thread Conformal Coating Waste
Conformal Coating Waste
Kane, Amol (349)
Wed, 2 Jul 2008 09:16:53 -0400
Re: Conformal Coating Waste
Ken Bloomquist
Wed, 2 Jul 2008 08:23:03 -0700
Re: Conformal Coating Waste
Kane, Amol (349)
Wed, 2 Jul 2008 13:11:07 -0400
Re: Conformal Coating Waste
Eric Kalgren
Wed, 2 Jul 2008 13:18:06 -0400
Re: Conformal Coating Waste
Mike Sewell
Wed, 2 Jul 2008 13:41:16 -0500
Re: Conformal Coating Waste
- bogert
Thu, 10 Jul 2008 05:40:33 -0400
Re: Conformal Coating Waste
Brian Ellis
Thu, 10 Jul 2008 13:23:39 +0300
Re: Conformal Coating Waste
Stadem, Richard D.
Thu, 10 Jul 2008 07:28:44 -0500
New Thread Costs of lead free
Costs of lead free
John Burke
Wed, 9 Jul 2008 16:08:41 -0700
New Thread Countefeit Components
Countefeit Components
Steve Gregory
Thu, 24 Jul 2008 13:38:13 -0500
Re: Countefeit Components
Bob Willis
Fri, 25 Jul 2008 13:21:33 +0100
New Thread Cupric & Cobra-Bond question
Cupric & Cobra-Bond question
Greg Triggs
Tue, 22 Jul 2008 14:52:48 -0700
Re: Cupric & Cobra-Bond question
Scott Westheimer
Tue, 22 Jul 2008 18:45:58 -0400
Re: Cupric & Cobra-Bond question
Dennis Fritz
Tue, 22 Jul 2008 18:55:15 -0400
New Thread De-ionised water wash
De-ionised water wash
Richard Strathie
Thu, 24 Jul 2008 08:03:13 -0500
Re: De-ionised water wash
Mike Fenner
Thu, 24 Jul 2008 14:51:46 +0100
Re: De-ionised water wash
Brian Ellis
Thu, 24 Jul 2008 17:26:49 +0300
New Thread Dow buys Rohm and Haas
Dow buys Rohm and Haas
R Sedlak
Thu, 10 Jul 2008 15:27:47 -0700
Re: Dow buys Rohm and Haas
Tan Geok Ang
Fri, 11 Jul 2008 08:40:32 +0800
Re: Dow buys Rohm and Haas
Whittaker, Dewey (EHCOE)
Fri, 11 Jul 2008 06:32:17 -0700
Re: Dow buys Rohm and Haas
Franklin D Asbell
Fri, 11 Jul 2008 08:46:29 -0500
Re: Dow buys Rohm and Haas
Haynes, Kim
Fri, 11 Jul 2008 09:23:17 -0500
Re: Dow buys Rohm and Haas
R Sedlak
Fri, 11 Jul 2008 09:47:32 -0700
New Thread Electrical Test Failures
Electrical Test Failures
<>
Tue, 1 Jul 2008 18:26:24 -0400
Re: Electrical Test Failures
Kathy Kuhlow
Tue, 1 Jul 2008 17:34:13 -0500
Re: Electrical Test Failures
Werner Engelmaier /*
Tue, 1 Jul 2008 19:08:01 EDT
Re: Electrical Test Failures
Guy Ramsey
Wed, 2 Jul 2008 08:21:34 -0400
Re: Electrical Test Failures
Whittaker, Dewey (EHCOE)
Mon, 7 Jul 2008 09:00:12 -0700
New Thread ENIG PLATING QUALITY
ENIG PLATING QUALITY
Lee Whiteman
Mon, 7 Jul 2008 08:07:28 -0400
Re: ENIG PLATING QUALITY
Bev Christian
Mon, 7 Jul 2008 08:21:24 -0400
New Thread Flex specifications - tolerance on hole size
Flex specifications - tolerance on hole size
Graham Collins
Mon, 7 Jul 2008 16:15:18 -0300
Re: Flex specifications - tolerance on hole size
Gary Ferrari
Mon, 7 Jul 2008 15:32:39 -0400
Re: Flex specifications - tolerance on hole size
Karl Hunsinger
Mon, 7 Jul 2008 15:34:35 -0400
Re: Flex specifications - tolerance on hole size
James Mahoney
Mon, 7 Jul 2008 15:40:39 -0400
Re: Flex specifications - tolerance on hole size
Werner Engelmaier /*
Mon, 7 Jul 2008 18:35:49 EDT
Re: Flex specifications - tolerance on hole size
Ken Bloomquist
Mon, 7 Jul 2008 15:56:54 -0700
Re: Flex specifications - tolerance on hole size
Werner Engelmaier /*
Mon, 7 Jul 2008 19:08:49 EDT
Re: Flex specifications - tolerance on hole size
Graham Collins
Tue, 8 Jul 2008 12:44:30 -0300
Re: Flex specifications - tolerance on hole size
Lenny Carter
Tue, 8 Jul 2008 12:28:45 -0400
Re: Flex specifications - tolerance on hole size
Ted Tontis
Tue, 8 Jul 2008 12:09:15 -0500
Re: Flex specifications - tolerance on hole size
John Burke
Tue, 8 Jul 2008 16:28:24 -0700
Re: Flex specifications - tolerance on hole size
Barton, Ken
Wed, 9 Jul 2008 07:19:41 -0700
Re: Flex specifications - tolerance on hole size
David Hoover
Wed, 9 Jul 2008 07:32:17 -0700
Re: Flex specifications - tolerance on hole size
Joe Fjelstad
Wed, 9 Jul 2008 11:55:45 EDT
Re: Flex specifications - tolerance on hole size
Graham Collins
Wed, 9 Jul 2008 13:12:28 -0300
Re: Flex specifications - tolerance on hole size
Ian Hanna
Wed, 9 Jul 2008 12:36:07 -0400
Re: Flex specifications - tolerance on hole size
James Mahoney
Wed, 9 Jul 2008 12:24:41 -0400
Re: Flex specifications - tolerance on hole size
Whittaker, Dewey (EHCOE)
Wed, 9 Jul 2008 07:51:55 -0700
Re: Flex specifications - tolerance on hole size
Whittaker, Dewey (EHCOE)
Wed, 9 Jul 2008 09:17:04 -0700
New Thread High Performance Electronics Assembly Cleaning Symposium, Chicago, Illinois
High Performance Electronics Assembly Cleaning Symposium, Chicago, Illinois
Tina Nerad
Wed, 30 Jul 2008 15:01:30 -0500
New Thread Hurry and Register today for IPC's Back to the Basics Summer School Webcast Series!
Hurry and Register today for IPC's Back to the Basics Summer School Webcast Series!
Michelle Michelotti
Tue, 8 Jul 2008 08:49:11 -0500
Hurry and Register today for IPC's Back to the Basics Summer School Webcast Series!
Michelle Michelotti
Tue, 15 Jul 2008 09:26:18 -0500
New Thread Immersion Tin Problem
Immersion Tin Problem
Rex Waygood
Fri, 4 Jul 2008 10:35:13 +0100
Re: Immersion Tin Problem
Steve Kelly
Fri, 4 Jul 2008 12:46:36 -0400
Re: Immersion Tin Problem
R Sedlak
Fri, 4 Jul 2008 17:27:26 -0700
Re: Immersion Tin Problem
Inge
Sat, 5 Jul 2008 06:58:00 -0700
Re: Immersion Tin Problem
Dale Ritzen
Mon, 7 Jul 2008 07:21:00 -0500
Re: Immersion Tin Problem
Stadem, Richard D.
Mon, 7 Jul 2008 14:03:09 -0500
Re: Immersion Tin Problem
Inge
Tue, 8 Jul 2008 09:18:59 -0700
Re: Immersion Tin Problem
Dennis Fritz
Tue, 8 Jul 2008 12:47:15 -0400
Re: Immersion Tin Problem
Ahne Oosterhof
Tue, 8 Jul 2008 10:16:02 -0700
Re: Immersion Tin Problem
Guy Ramsey
Tue, 8 Jul 2008 15:49:31 -0400
Re: Immersion Tin Problem
Inge
Wed, 9 Jul 2008 11:51:11 -0700
Re: Immersion Tin Problem
Stadem, Richard D.
Wed, 9 Jul 2008 15:11:25 -0500
New Thread Indelible marking
Indelible marking
Ioan Tempea
Thu, 17 Jul 2008 10:35:27 -0400
Re: Indelible marking
Joyce Koo
Thu, 17 Jul 2008 10:40:36 -0400
Re: Indelible marking
Ken Bloomquist
Thu, 17 Jul 2008 07:43:50 -0700
Re: Indelible marking
Rex Waygood
Thu, 17 Jul 2008 16:00:39 +0100
Re: Indelible marking
Stadem, Richard D.
Thu, 17 Jul 2008 10:27:22 -0500
Re: Indelible marking
Stadem, Richard D.
Thu, 17 Jul 2008 10:33:00 -0500
Re: Indelible marking
Ioan Tempea
Thu, 17 Jul 2008 11:39:35 -0400
Re: Indelible marking
Temkin, Gregg
Thu, 17 Jul 2008 10:52:47 -0700
Re: Indelible marking
Kevin Glidden
Thu, 17 Jul 2008 14:32:41 -0400
Re: Indelible marking
Stadem, Richard D.
Thu, 17 Jul 2008 13:48:19 -0500
Re: Indelible marking
Phil Nutting
Thu, 17 Jul 2008 14:51:26 -0400
Re: Indelible marking
Juan T. Marugán
Mon, 21 Jul 2008 07:57:02 -0500
Re: Indelible marking
Stadem, Richard D.
Mon, 21 Jul 2008 09:03:35 -0500
New Thread Inspection of bottom only terminations / process verification
Inspection of bottom only terminations / process verification
Kevin Glidden
Tue, 15 Jul 2008 08:19:39 -0400
Re: Inspection of bottom only terminations / process verification
Guy Ramsey
Tue, 15 Jul 2008 11:30:29 -0400
Re: Inspection of bottom only terminations / process verification
Werner Engelmaier /*
Wed, 16 Jul 2008 12:10:56 EDT
New Thread IPC 7711/7721 training
Re: IPC 7711/7721 training
Karen Capps
Mon, 21 Jul 2008 13:57:02 -0400
Re: IPC 7711/7721 training
Roberts, Jon
Mon, 21 Jul 2008 15:44:23 -0500
Re: IPC 7711/7721 training
Steve Gregory
Mon, 21 Jul 2008 16:06:40 -0500
New Thread IPC Advanced Packaging Webcast Series in August 2008
IPC Advanced Packaging Webcast Series in August 2008
Tina Nerad
Wed, 30 Jul 2008 10:16:08 -0500
New Thread IPC HDI Technology Conference, October 6-8, 2008, Dallas, Texas
IPC HDI Technology Conference, October 6-8, 2008, Dallas, Texas
Tina Nerad
Thu, 31 Jul 2008 13:42:18 -0500
New Thread IPC-6012A - allowable conductor width reduction interpretation?
Re: IPC-6012A - allowable conductor width reduction interpretation?
Grunde Gjertsen
Tue, 1 Jul 2008 08:11:20 +0200
Re: IPC-6012A - allowable conductor width reduction interpretation?
Ryan Grant
Tue, 1 Jul 2008 09:52:53 -0600
Re: IPC-6012A - allowable conductor width reduction interpretation?
Ryan Grant
Tue, 1 Jul 2008 10:14:31 -0600
New Thread Join IPC at a design-related event on the east coast!
Join IPC at a design-related event on the east coast!
Tina Nerad
Tue, 15 Jul 2008 14:31:12 -0500
New Thread Join IPC in Maple Plain, Minnesota for these upcoming workshops!
Join IPC in Maple Plain, Minnesota for these upcoming workshops!
Tina Nerad
Mon, 7 Jul 2008 15:18:03 -0500
New Thread Last Chance to Register today for upcoming July Fabrication Workshops - Hosted by OMG Electronic Chemicals, Inc.
Last Chance to Register today for upcoming July Fabrication Workshops - Hosted by OMG Electronic Chemicals, Inc.
Michelle Michelotti
Thu, 3 Jul 2008 08:13:55 -0500
New Thread Lead-free soldering of electrolytic caps
Lead-free soldering of electrolytic caps
Ioan Tempea
Tue, 22 Jul 2008 10:44:41 -0400
Re: Lead-free soldering of electrolytic caps
Stadem, Richard D.
Tue, 22 Jul 2008 10:21:20 -0500
Re: Lead-free soldering of electrolytic caps
Ioan Tempea
Tue, 22 Jul 2008 11:43:15 -0400
Re: Lead-free soldering of electrolytic caps
Carl Proescholdt
Tue, 22 Jul 2008 10:57:41 -0500
Re: Lead-free soldering of electrolytic caps
Ioan Tempea
Tue, 22 Jul 2008 12:09:27 -0400
Re: Lead-free soldering of electrolytic caps
Carl Proescholdt
Tue, 22 Jul 2008 12:16:05 -0500
Re: Lead-free soldering of electrolytic caps
Guy Ramsey
Tue, 22 Jul 2008 21:21:00 -0400
Re: Lead-free soldering of electrolytic caps
John Burke
Wed, 23 Jul 2008 09:41:38 -0700
Re: Lead-free soldering of electrolytic caps
Leland Woodall
Thu, 24 Jul 2008 07:51:17 -0400
Re: Lead-free soldering of electrolytic caps
Carl Proescholdt
Thu, 24 Jul 2008 08:32:26 -0500
Re: Lead-free soldering of electrolytic caps
Leland Woodall
Thu, 24 Jul 2008 10:04:06 -0400
Re: Lead-free soldering of electrolytic caps
Ioan Tempea
Thu, 24 Jul 2008 08:05:26 -0400
Re: Lead-free soldering of electrolytic caps
legg
Thu, 24 Jul 2008 09:32:47 -0500
Re: Lead-free soldering of electrolytic caps
legg
Thu, 24 Jul 2008 10:03:51 -0500
New Thread looking for ENiG photos
looking for ENiG photos
Pete Houwen
Mon, 21 Jul 2008 08:58:20 -0500
Re: looking for ENiG photos
Franklin Asbell
Mon, 21 Jul 2008 09:39:12 -0500
Re: looking for ENiG photos
Stadem, Richard D.
Mon, 21 Jul 2008 09:48:03 -0500
Re: looking for ENiG photos
Stadem, Richard D.
Mon, 21 Jul 2008 09:50:03 -0500
Re: looking for ENiG photos
Rex Waygood
Mon, 21 Jul 2008 16:08:20 +0100
Re: looking for ENiG photos
Igoshev, Vladimir
Mon, 21 Jul 2008 11:14:34 -0400
Re: looking for ENiG photos
Franklin Asbell
Mon, 21 Jul 2008 10:27:58 -0500
Re: looking for ENiG photos
Stadem, Richard D.
Mon, 21 Jul 2008 10:31:36 -0500
Re: looking for ENiG photos
Jason Zhao
Mon, 21 Jul 2008 10:28:07 -0500
Re: looking for ENiG photos
Igoshev, Vladimir
Mon, 21 Jul 2008 11:43:39 -0400
Re: looking for ENiG photos
Lenny Carter
Mon, 21 Jul 2008 12:32:40 -0400
Re: looking for ENiG photos
Stadem, Richard D.
Mon, 21 Jul 2008 12:23:10 -0500
Re: looking for ENiG photos
Inge
Mon, 21 Jul 2008 12:01:20 -0700
Re: looking for ENiG photos
Pete Houwen
Mon, 21 Jul 2008 14:54:46 -0500
Re: looking for ENiG photos
Franklin Asbell
Mon, 21 Jul 2008 15:27:41 -0500
Re: looking for ENiG photos
Inge
Mon, 21 Jul 2008 14:31:22 -0700
Re: looking for ENiG photos
R Sedlak
Mon, 21 Jul 2008 15:38:54 -0700
Re: looking for ENiG photos
Paul Reid
Mon, 21 Jul 2008 19:05:49 -0400
Re: looking for ENiG photos
Bev Christian
Mon, 21 Jul 2008 20:18:48 -0400
Re: looking for ENiG photos
Werner Engelmaier /*
Tue, 22 Jul 2008 06:22:29 EDT
Re: looking for ENiG photos
Werner Engelmaier /*
Tue, 22 Jul 2008 06:24:39 EDT
Re: looking for ENiG photos
Wenger, George M.
Tue, 22 Jul 2008 06:25:44 -0400
Re: looking for ENiG photos
Steve Gregory
Tue, 22 Jul 2008 08:14:30 -0500
Re: looking for ENiG photos
Pete Houwen
Tue, 22 Jul 2008 14:38:03 -0500
Re: looking for ENiG photos
Pete Houwen
Wed, 23 Jul 2008 10:20:00 -0500
Re: looking for ENiG photos
Victor Hernandez
Wed, 23 Jul 2008 10:48:50 -0500
Re: looking for ENiG photos
Franklin Asbell
Wed, 23 Jul 2008 10:52:32 -0500
Re: looking for ENiG photos
Jason Zhao
Wed, 23 Jul 2008 10:57:56 -0500
Re: looking for ENiG photos
Paul Reid
Mon, 21 Jul 2008 18:12:21 -0400
Re: looking for ENiG photos
Stadem, Richard D.
Wed, 23 Jul 2008 11:52:27 -0500
Re: looking for ENiG photos
John Burke
Wed, 23 Jul 2008 10:21:44 -0700
Re: looking for ENiG photos
Lee parker
Wed, 23 Jul 2008 14:37:11 -0400
Re: looking for ENiG photos
Stadem, Richard D.
Wed, 23 Jul 2008 14:01:40 -0500
Re: looking for ENiG photos
Pete Houwen
Wed, 23 Jul 2008 14:45:35 -0500
Re: looking for ENiG photos
Joe Fjelstad
Wed, 23 Jul 2008 16:14:24 EDT
Re: looking for ENiG photos
Stadem, Richard D.
Wed, 23 Jul 2008 15:19:11 -0500
Re: looking for ENiG photos
Franklin Asbell
Wed, 23 Jul 2008 15:31:18 -0500
Re: looking for ENiG photos
Franklin Asbell
Wed, 23 Jul 2008 15:34:53 -0500
Re: looking for ENiG photos
Paul Reid
Wed, 23 Jul 2008 17:19:22 -0400
Re: looking for ENiG photos
R Sedlak
Wed, 23 Jul 2008 15:40:52 -0700
Re: looking for ENiG photos
Joe Fjelstad
Wed, 23 Jul 2008 19:15:39 EDT
Re: looking for ENiG photos
Werner Engelmaier /*
Wed, 23 Jul 2008 21:44:21 EDT
Re: looking for ENiG photos
Scott Westheimer
Wed, 23 Jul 2008 17:11:59 -0400
Re: looking for ENiG photos
Tan Geok Ang
Thu, 24 Jul 2008 17:34:04 +0800
Re: looking for ENiG photos
Mike Fenner
Thu, 24 Jul 2008 13:58:13 +0100
Re: looking for ENiG photos
George Milad
Thu, 24 Jul 2008 09:36:03 EDT
Re: looking for ENiG photos
Joyce Koo
Thu, 24 Jul 2008 10:08:56 -0400
New Thread Max time allowed between soldering and cleaning
Max time allowed between soldering and cleaning
- bogert
Wed, 23 Jul 2008 19:08:43 -0400
Re: Max time allowed between soldering and cleaning
Brian Ellis
Thu, 24 Jul 2008 11:52:37 +0300
Re: Max time allowed between soldering and cleaning
Mike Fenner
Thu, 24 Jul 2008 14:40:44 +0100
New Thread Measuring Scores?
Measuring Scores?
Lenny at ERG
Mon, 21 Jul 2008 22:09:23 -0400
Re: Measuring Scores?
stephengregory5849
Mon, 21 Jul 2008 22:15:17 -0500
Re: Measuring Scores?
stephengregory5849
Mon, 21 Jul 2008 22:23:07 -0500
Re: Measuring Scores?
Phil Nutting
Tue, 22 Jul 2008 08:20:02 -0400
New Thread Mechanical damage to BGA
Mechanical damage to BGA
Ioan Tempea
Fri, 18 Jul 2008 14:47:59 -0400
Re: Mechanical damage to BGA
Victor Hernandez
Fri, 18 Jul 2008 13:53:44 -0500
Re: Mechanical damage to BGA
Igoshev, Vladimir
Fri, 18 Jul 2008 15:01:27 -0400
Re: Mechanical damage to BGA
Ioan Tempea
Fri, 18 Jul 2008 15:17:52 -0400
Re: Mechanical damage to BGA
Franklin D Asbell
Fri, 18 Jul 2008 14:21:53 -0500
Re: Mechanical damage to BGA
Igoshev, Vladimir
Fri, 18 Jul 2008 15:35:01 -0400
Re: Mechanical damage to BGA
McGee, Michael
Fri, 18 Jul 2008 15:28:23 -0400
Re: Mechanical damage to BGA
Ioan Tempea
Fri, 18 Jul 2008 15:56:15 -0400
Re: Mechanical damage to BGA
Franklin D Asbell
Fri, 18 Jul 2008 15:07:02 -0500
Re: Mechanical damage to BGA
McGee, Michael
Fri, 18 Jul 2008 16:13:02 -0400
Re: Mechanical damage to BGA
Mike Sewell
Fri, 18 Jul 2008 15:19:15 -0500
Re: Mechanical damage to BGA
Ken Bloomquist
Fri, 18 Jul 2008 13:25:16 -0700
Re: Mechanical damage to BGA
Reuven Rokah
Mon, 21 Jul 2008 10:03:28 +0300
Re: Mechanical damage to BGA
Eric CHRISTISON
Mon, 21 Jul 2008 09:13:46 +0100
Re: Mechanical damage to BGA
Ioan Tempea
Mon, 21 Jul 2008 07:25:15 -0400
Re: Mechanical damage to BGA
Reuven Rokah
Mon, 21 Jul 2008 14:37:17 +0300
Re: Mechanical damage to BGA
Stadem, Richard D.
Mon, 21 Jul 2008 08:01:59 -0500
Re: Mechanical damage to BGA
Joyce Koo
Mon, 21 Jul 2008 09:14:26 -0400
Re: Mechanical damage to BGA
Croslin, Robert
Mon, 21 Jul 2008 14:21:39 -0400
Re: Mechanical damage to BGA
Bev Christian
Mon, 21 Jul 2008 20:20:39 -0400
New Thread mechanical hold-down for PLCC-44 IC in socket
mechanical hold-down for PLCC-44 IC in socket
Wilson, Bob
Tue, 22 Jul 2008 15:44:27 -0700
New Thread PCB color
PCB color
Barry Gallegos
Thu, 3 Jul 2008 12:39:49 -0600
Re: PCB color
Ioan Tempea
Fri, 4 Jul 2008 13:06:02 -0400
Re: PCB color
Bernard Kessler
Fri, 4 Jul 2008 10:10:10 -0700
Re: PCB color
Dennis Fritz
Sat, 5 Jul 2008 06:34:13 -0400
Re: PCB color
Barry Gallegos
Mon, 7 Jul 2008 08:57:56 -0600
Re: PCB color
Jack Olson
Mon, 7 Jul 2008 10:12:02 -0500
Re: PCB color
Whittaker, Dewey (EHCOE)
Mon, 7 Jul 2008 09:03:18 -0700
Re: PCB color
Barry Gallegos
Mon, 7 Jul 2008 10:28:28 -0600
Re: PCB color
Dwight Mattix
Mon, 7 Jul 2008 09:57:10 -0700
New Thread PCB Inner layer shifting
PCB Inner layer shifting
Kathy Kuhlow
Wed, 9 Jul 2008 15:07:25 -0500
Re: PCB Inner layer shifting
Franklin D Asbell
Wed, 9 Jul 2008 15:40:12 -0500
Re: PCB Inner layer shifting
Werner Engelmaier /*
Wed, 9 Jul 2008 16:47:09 EDT
Re: PCB Inner layer shifting
Ted Tontis
Wed, 9 Jul 2008 16:08:17 -0500
Re: PCB Inner layer shifting
Franklin D Asbell
Wed, 9 Jul 2008 16:10:41 -0500
Re: PCB Inner layer shifting
Franklin D Asbell
Wed, 9 Jul 2008 16:31:36 -0500
Re: PCB Inner layer shifting
John Burke
Wed, 9 Jul 2008 15:39:25 -0700
Re: PCB Inner layer shifting
Paul Reid
Thu, 10 Jul 2008 11:05:34 -0400
Re: PCB Inner layer shifting
Dwight Mattix
Thu, 10 Jul 2008 08:33:40 -0700
Re: PCB Inner layer shifting
Joe Fjelstad
Thu, 10 Jul 2008 11:46:13 EDT
New Thread PCB tolerances after reflow
PCB tolerances after reflow
Lamote, Jan
Fri, 4 Jul 2008 11:11:39 +0200
Re: PCB tolerances after reflow
Werner Engelmaier /*
Sat, 5 Jul 2008 09:57:02 EDT
Re: PCB tolerances after reflow
Brian Ellis
Sat, 5 Jul 2008 17:39:03 +0300
New Thread Plated Wire in Wedge Bonding
Plated Wire in Wedge Bonding
Scott Gold
Mon, 14 Jul 2008 13:18:09 -0500
Re: Plated Wire in Wedge Bonding
Joe Fjelstad
Mon, 14 Jul 2008 17:33:33 EDT
Re: Plated Wire in Wedge Bonding
Joyce Koo
Mon, 14 Jul 2008 22:37:03 -0400
Re: Plated Wire in Wedge Bonding
Gold, Scott
Wed, 16 Jul 2008 13:47:47 -0400
New Thread Press-fit connectors
Press-fit connectors
Maxime Augustin
Wed, 16 Jul 2008 15:59:31 -0500
Re: Press-fit connectors
Brian Chandler
Thu, 17 Jul 2008 06:47:44 -0500
New Thread Question on Timeliness of J-STD-001D Ionic Contamination Cleanliness Testing
Question on Timeliness of J-STD-001D Ionic Contamination Cleanliness Testing
- bogert
Thu, 17 Jul 2008 18:20:44 -0400
Re: Question on Timeliness of J-STD-001D Ionic Contamination Cleanliness Testing
Bev Christian
Thu, 17 Jul 2008 21:16:11 -0400
Re: Question on Timeliness of J-STD-001D Ionic Contamination Cleanliness Testing
Brian Ellis
Fri, 18 Jul 2008 09:05:14 +0300
Re: Question on Timeliness of J-STD-001D Ionic Contamination Cleanliness Testing
Stadem, Richard D.
Fri, 18 Jul 2008 09:03:02 -0500
Re: Question on Timeliness of J-STD-001D Ionic Contamination Cleanliness Testing
Guy Ramsey
Fri, 18 Jul 2008 10:15:01 -0400
Re: Question on Timeliness of J-STD-001D Ionic Contamination Cleanliness Testing
Whittaker, Dewey (EHCOE)
Fri, 18 Jul 2008 07:27:55 -0700
New Thread Read this whole thing
FW: Read this whole thing
Whittaker, Dewey (EHCOE)
Fri, 11 Jul 2008 08:06:04 -0700
Re: FW: Read this whole thing
Dwight Mattix
Fri, 11 Jul 2008 08:15:40 -0700
FW: Read this whole thing
Whittaker, Dewey (EHCOE)
Fri, 11 Jul 2008 08:21:38 -0700
Re: FW: Read this whole thing
Paul Reid
Fri, 11 Jul 2008 13:26:31 -0400
Re: FW: Read this whole thing
Guy Ramsey
Fri, 11 Jul 2008 13:46:36 -0400
Re: FW: Read this whole thing
Paul Reid
Fri, 11 Jul 2008 14:16:00 -0400
Re: FW: Read this whole thing
Barbara Burcham
Fri, 11 Jul 2008 13:24:38 -0500
Re: FW: Read this whole thing
Eric Kalgren
Fri, 11 Jul 2008 14:37:39 -0400
Re: FW: Read this whole thing
Whittaker, Dewey (EHCOE)
Fri, 11 Jul 2008 11:12:22 -0700
Re: FW: Read this whole thing
Inge
Fri, 11 Jul 2008 13:35:29 -0700
New Thread Register today for IPC's Advanced Packaging Webcast Series
Register today for IPC's Advanced Packaging Webcast Series
Michelle Michelotti
Thu, 17 Jul 2008 14:47:19 -0500
Register today for IPC's Advanced Packaging Webcast Series
Michelle Michelotti
Thu, 24 Jul 2008 13:51:41 -0500
New Thread Repair Need for Inverted Chip Resistors
Repair Need for Inverted Chip Resistors
Leland Woodall
Thu, 31 Jul 2008 13:12:20 -0400
Re: Repair Need for Inverted Chip Resistors
Paul Pidgeon
Thu, 31 Jul 2008 18:47:02 +0100
Re: Repair Need for Inverted Chip Resistors
Whittaker, Dewey (EHCOE)
Thu, 31 Jul 2008 11:00:06 -0700
Re: Repair Need for Inverted Chip Resistors
Leland Woodall
Thu, 31 Jul 2008 15:11:35 -0400
Re: Repair Need for Inverted Chip Resistors
Guy Ramsey
Thu, 31 Jul 2008 15:51:47 -0400
Re: Repair Need for Inverted Chip Resistors
Leland Woodall
Thu, 31 Jul 2008 15:59:29 -0400
Re: Repair Need for Inverted Chip Resistors
Inge
Thu, 31 Jul 2008 15:28:35 -0700
Re: Repair Need for Inverted Chip Resistors
Inge
Thu, 31 Jul 2008 15:48:21 -0700
New Thread Robotics Engineer Needed
Robotics Engineer Needed
Wood Kenneth
Tue, 15 Jul 2008 10:37:49 -0400
New Thread Searching for Wavesolder Process Engineer
Searching for Wavesolder Process Engineer
AnnMarie Cross
Wed, 23 Jul 2008 09:18:29 -0500
New Thread Silver-Palladium termination SMT solder problems
Silver-Palladium termination SMT solder problems
Grant Emandien
Wed, 2 Jul 2008 11:19:34 +0200
Re: Silver-Palladium termination SMT solder problems
Rex Waygood
Wed, 2 Jul 2008 10:38:38 +0100
Re: Silver-Palladium termination SMT solder problems
Bob Willis
Wed, 2 Jul 2008 11:23:44 +0100
Re: Silver-Palladium termination SMT solder problems
David D. Hillman
Wed, 2 Jul 2008 06:39:25 -0500
Re: Silver-Palladium termination SMT solder problems
Hernefjord Ingemar
Wed, 2 Jul 2008 13:53:00 +0200
New Thread Solder balls
Solder balls
Genny Gibbard
Mon, 21 Jul 2008 09:52:03 -0600
Re: Solder balls
Steve Gregory
Mon, 21 Jul 2008 12:54:09 -0500
Re: Solder balls
Igoshev, Vladimir
Mon, 21 Jul 2008 14:21:02 -0400
Re: Solder balls
Mike Sewell
Mon, 21 Jul 2008 13:53:23 -0500
Re: Solder balls
Ted Tontis
Mon, 21 Jul 2008 13:52:23 -0500
Re: Solder balls
Genny Gibbard
Mon, 21 Jul 2008 12:55:58 -0600
Re: Solder balls
Steve Gregory
Mon, 21 Jul 2008 13:56:53 -0500
Re: Solder balls
Igoshev, Vladimir
Mon, 21 Jul 2008 15:07:58 -0400
Re: Solder balls
Genny Gibbard
Mon, 21 Jul 2008 13:10:02 -0600
Re: Solder balls
Mike Sewell
Mon, 21 Jul 2008 14:14:40 -0500
Re: Solder balls
Stadem, Richard D.
Mon, 21 Jul 2008 14:34:32 -0500
Re: Solder balls
John Burke
Mon, 21 Jul 2008 13:10:08 -0700
Re: Solder balls
Genny Gibbard
Mon, 21 Jul 2008 16:55:10 -0600
Re: Solder balls
Rex Waygood
Tue, 22 Jul 2008 08:12:01 +0100
Re: Solder balls
Stadem, Richard D.
Tue, 22 Jul 2008 07:31:27 -0500
New Thread Solder mask
Solder mask
Graeme Henderson
Sun, 20 Jul 2008 20:41:59 -0500
New Thread Solder Paste with craters.
Solder Paste with craters.
Leif Erik Laerum
Wed, 30 Jul 2008 08:29:11 -0500
Re: Solder Paste with craters.
Stadem, Richard D.
Wed, 30 Jul 2008 08:53:42 -0500
Re: Solder Paste with craters.
Steve Gregory
Wed, 30 Jul 2008 10:59:08 -0500
Re: Solder Paste with craters.
Guy Ramsey
Wed, 30 Jul 2008 12:31:20 -0400
Re: Solder Paste with craters.
Dennis Fritz
Wed, 30 Jul 2008 12:50:31 -0400
Re: Solder Paste with craters.
Whittaker, Dewey (EHCOE)
Wed, 30 Jul 2008 09:55:36 -0700
Re: Solder Paste with craters.
Guy Ramsey
Wed, 30 Jul 2008 14:00:50 -0400
Re: Solder Paste with craters.
Inge
Wed, 30 Jul 2008 11:11:33 -0700
Re: Solder Paste with craters.
Leif Erik Laerum
Wed, 30 Jul 2008 15:56:15 -0500
Re: Solder Paste with craters.
Inge
Wed, 30 Jul 2008 14:21:51 -0700
Re: Solder Paste with craters.
Paul Edwards
Wed, 30 Jul 2008 15:20:22 -0700
Re: Solder Paste with craters.
John Burke
Wed, 30 Jul 2008 15:46:50 -0700
Re: Solder Paste with craters.
Creswick, Steven
Thu, 31 Jul 2008 05:45:35 -0400
Re: Solder Paste with craters.
Tan Geok Ang
Thu, 31 Jul 2008 17:59:22 +0800
Re: Solder Paste with craters.
Leif Erik Laerum
Thu, 31 Jul 2008 08:54:49 -0500
Re: Solder Paste with craters.
Leif Erik Laerum
Thu, 31 Jul 2008 10:34:02 -0500
Re: Solder Paste with craters.
Joyce Koo
Thu, 31 Jul 2008 12:02:16 -0400
Re: Solder Paste with craters.
Guy Ramsey
Thu, 31 Jul 2008 15:00:52 -0400
Re: Solder Paste with craters.
Leif Erik Laerum
Thu, 31 Jul 2008 14:45:36 -0500
Re: Solder Paste with craters.
Leif Erik Laerum
Thu, 31 Jul 2008 15:05:18 -0500
Re: Solder Paste with craters.
Guy Ramsey
Thu, 31 Jul 2008 16:02:02 -0400
Re: Solder Paste with craters.
Paul Edwards
Thu, 31 Jul 2008 13:00:26 -0700
Re: Solder Paste with craters.
Inge
Thu, 31 Jul 2008 13:52:09 -0700
Re: Solder Paste with craters.
John Burke
Thu, 31 Jul 2008 14:14:36 -0700
Re: Solder Paste with craters.
Stadem, Richard D.
Thu, 31 Jul 2008 16:23:14 -0500
Re: Solder Paste with craters.
Inge
Thu, 31 Jul 2008 14:26:42 -0700
Re: Solder Paste with craters.
Whittaker, Dewey (EHCOE)
Thu, 31 Jul 2008 14:30:18 -0700
Re: Solder Paste with craters.
Inge
Thu, 31 Jul 2008 14:32:18 -0700
Re: Solder Paste with craters.
Leif Erik Laerum
Thu, 31 Jul 2008 16:37:04 -0500
Re: Solder Paste with craters.
Inge
Thu, 31 Jul 2008 14:38:05 -0700
Re: Solder Paste with craters.
Leif Erik Laerum
Thu, 31 Jul 2008 17:08:37 -0500
Re: Solder Paste with craters.
John Burke
Thu, 31 Jul 2008 16:15:36 -0700
Re: Solder Paste with craters.
John Burke
Thu, 31 Jul 2008 16:22:41 -0700
Re: Solder Paste with craters.
Paul Edwards
Thu, 31 Jul 2008 17:36:37 -0700
New Thread Solithane coating dewetting
Re: Solithane coating dewetting
Graham Naisbitt
Tue, 1 Jul 2008 10:54:10 +0100
Re: Solithane coating dewetting
Tan Geok Ang
Tue, 1 Jul 2008 20:02:20 +0800
Re: Solithane coating dewetting
Graham Naisbitt
Tue, 1 Jul 2008 16:36:27 +0100
Re: Solithane coating dewetting
Tan Geok Ang
Tue, 1 Jul 2008 23:50:16 +0800
Re: Solithane coating dewetting
Graham Naisbitt
Tue, 1 Jul 2008 17:46:35 +0100
New Thread Thermal header Solder attachment Guidelines
Re: Thermal header Solder attachment Guidelines
Victor Hernandez
Tue, 22 Jul 2008 07:03:31 -0500
Re: Thermal header Solder attachment Guidelines
Rex Waygood
Tue, 22 Jul 2008 13:25:36 +0100
New Thread They solder well... But they don't work!
They solder well... But they don't work!
Dale Ritzen
Tue, 22 Jul 2008 07:44:00 -0500
Re: They solder well... But they don't work!
Bev Christian
Tue, 22 Jul 2008 08:50:50 -0400
Re: They solder well... But they don't work!
Stadem, Richard D.
Tue, 22 Jul 2008 08:09:44 -0500
Re: They solder well... But they don't work!
Werner Engelmaier /*
Tue, 22 Jul 2008 09:12:53 EDT
Re: They solder well... But they don't work!
Mike Buetow
Tue, 22 Jul 2008 09:22:01 -0400
Re: They solder well... But they don't work!
Werner Engelmaier /*
Tue, 22 Jul 2008 09:42:40 EDT
Re: They solder well... But they don't work!
Guy Ramsey
Tue, 22 Jul 2008 10:05:47 -0400
Re: They solder well... But they don't work!
Wenger, George M.
Tue, 22 Jul 2008 10:31:31 -0400
Re: They solder well... But they don't work!
Liang Yin
Tue, 22 Jul 2008 09:06:52 -0400
Re: They solder well... But they don't work!
Kane, Amol (349)
Wed, 23 Jul 2008 08:08:18 -0400
Re: They solder well... But they don't work!
Dale Ritzen
Thu, 24 Jul 2008 07:17:48 -0500
Re: They solder well... But they don't work!
Werner Engelmaier /*
Thu, 24 Jul 2008 12:28:04 EDT
New Thread Trinocular Scope With Display
Trinocular Scope With Display
Kane, Joseph E (US SSA)
Tue, 29 Jul 2008 14:16:19 -0400
Re: Trinocular Scope With Display
Lee Whiteman
Tue, 29 Jul 2008 15:26:47 -0400
Re: Trinocular Scope With Display
Stadem, Richard D.
Tue, 29 Jul 2008 15:35:41 -0500
Re: Trinocular Scope With Display
Rex Waygood
Wed, 30 Jul 2008 08:23:17 +0100
Re: Trinocular Scope With Display
Bev Christian
Wed, 30 Jul 2008 07:48:40 -0400
Re: Trinocular Scope With Display
Gold, Scott
Wed, 30 Jul 2008 08:28:58 -0400
Re: Trinocular Scope With Display
Leif Erik Laerum
Wed, 30 Jul 2008 07:59:11 -0500
Re: Trinocular Scope With Display
Guy Ramsey
Wed, 30 Jul 2008 09:33:57 -0400
Re: Trinocular Scope With Display
Inge
Wed, 30 Jul 2008 10:17:34 -0700
Re: Trinocular Scope With Display
Stadem, Richard D.
Wed, 30 Jul 2008 12:46:52 -0500
New Thread Trinocular Scope With Display - Tin Whiskers?
Re: Trinocular Scope With Display - Tin Whiskers?
Dennis Fritz
Tue, 29 Jul 2008 17:07:51 -0400
Re: Trinocular Scope With Display - Tin Whiskers?
Bob METCALF
Wed, 30 Jul 2008 09:14:07 -0400
Re: Trinocular Scope With Display - Tin Whiskers?
Stadem, Richard D.
Wed, 30 Jul 2008 09:15:55 -0500
Re: Trinocular Scope With Display - Tin Whiskers?
Lenny Carter
Wed, 30 Jul 2008 11:02:12 -0400
New Thread Upcoming IPC design-related workshops on the east coast!
Upcoming IPC design-related workshops on the east coast!
Tina Nerad
Mon, 7 Jul 2008 10:46:53 -0500
New Thread Use of QFN devices in high reliability applications
Use of QFN devices in high reliability applications
Temkin, Gregg
Wed, 30 Jul 2008 14:26:37 -0700
Re: Use of QFN devices in high reliability applications
Werner Engelmaier /*
Wed, 30 Jul 2008 20:57:20 EDT
Re: Use of QFN devices in high reliability applications
David D. Hillman
Thu, 31 Jul 2008 06:55:43 -0500
Re: Use of QFN devices in high reliability applications
Stadem, Richard D.
Thu, 31 Jul 2008 07:39:04 -0500
Re: Use of QFN devices in high reliability applications
Paul Reid
Thu, 31 Jul 2008 09:28:18 -0400
Re: Use of QFN devices in high reliability applications
Lee Whiteman
Thu, 31 Jul 2008 09:57:08 -0400
Re: Use of QFN devices in high reliability applications
Joe Fjelstad
Thu, 31 Jul 2008 12:35:55 EDT
Re: Use of QFN devices in high reliability applications
Joe Fjelstad
Thu, 31 Jul 2008 16:15:17 EDT
Re: Use of QFN devices in high reliability applications
Inge
Thu, 31 Jul 2008 14:16:13 -0700
Re: Use of QFN devices in high reliability applications
Sklenar Vit (AE/MFE3-AU)
Fri, 1 Aug 2008 08:28:46 +0800
New Thread Washing dirty conformally coated boards
Washing dirty conformally coated boards
Phil Nutting
Tue, 22 Jul 2008 11:18:03 -0400
Re: Washing dirty conformally coated boards
Douglas O. Pauls
Tue, 22 Jul 2008 10:26:23 -0500
Re: Washing dirty conformally coated boards
Kevin Glidden
Tue, 22 Jul 2008 12:00:36 -0400
Re: Washing dirty conformally coated boards
Brian Ellis
Tue, 22 Jul 2008 19:00:10 +0300
Re: Washing dirty conformally coated boards
Phil Nutting
Tue, 22 Jul 2008 12:24:52 -0400
Re: Washing dirty conformally coated boards
Douglas O. Pauls
Tue, 22 Jul 2008 11:50:50 -0500
Re: Washing dirty conformally coated boards
Phil Nutting
Tue, 22 Jul 2008 13:20:22 -0400
Re: Washing dirty conformally coated boards
Douglas O. Pauls
Tue, 22 Jul 2008 13:33:52 -0500
Re: Washing dirty conformally coated boards
Terry L. Munson
Tue, 22 Jul 2008 14:56:07 EDT
Re: Washing dirty conformally coated boards
Inge
Tue, 22 Jul 2008 12:43:48 -0700
Re: Washing dirty conformally coated boards
Phil Nutting
Tue, 22 Jul 2008 15:51:49 -0400
Re: Washing dirty conformally coated boards
Phil Nutting
Tue, 22 Jul 2008 14:27:10 -0400
Re: Washing dirty conformally coated boards
Inge
Tue, 22 Jul 2008 13:04:55 -0700
Re: Washing dirty conformally coated boards
Steve Gregory
Tue, 22 Jul 2008 15:23:29 -0500
Re: Washing dirty conformally coated boards
Inge
Tue, 22 Jul 2008 14:36:46 -0700
New Thread White Soldermask turning yellow
White Soldermask turning yellow
Richard Olsen
Mon, 21 Jul 2008 13:59:59 -0700
New Thread [DC] Check this out if you will
Re: [DC] Check this out if you will
Barbara Burcham
Tue, 1 Jul 2008 13:17:14 -0500
Re: [DC] Check this out if you will
John Burke
Tue, 1 Jul 2008 11:24:47 -0700
Re: [DC] Check this out if you will
Lenny Carter
Tue, 1 Jul 2008 15:22:36 -0400
Re: [DC] Check this out if you will
Joe Fjelstad
Tue, 1 Jul 2008 22:28:54 -0400
Re: [DC] Check this out if you will
Dwight Mattix
Tue, 1 Jul 2008 20:39:29 -0700
New Thread [LF] FW: IPC Meeting Brussels
FW: [LF] FW: IPC Meeting Brussels
John Burke
Thu, 3 Jul 2008 07:47:28 -0700
New Thread [LF] [TN] SN100 for Reflow Application
Re: [LF] [TN] SN100 for Reflow Application
Kane, Amol (349)
Thu, 3 Jul 2008 14:08:36 -0400
Re: [LF] [TN] SN100 for Reflow Application
Werner Engelmaier /*
Fri, 4 Jul 2008 22:33:12 EDT
Re: [LF] [TN] SN100 for Reflow Application
Ted Gaines
Sat, 5 Jul 2008 03:30:04 +0000
Re: [LF] [TN] SN100 for Reflow Application
Igoshev, Vladimir
Sun, 6 Jul 2008 12:40:27 -0400
Re: [LF] [TN] SN100 for Reflow Application
Stadem, Richard D.
Mon, 7 Jul 2008 14:02:39 -0500
FW: [LF] [TN] SN100 for Reflow Application
Stadem, Richard D.
Wed, 16 Jul 2008 08:34:03 -0500
Re: FW: [LF] [TN] SN100 for Reflow Application
Werner Engelmaier /*
Wed, 16 Jul 2008 12:58:55 EDT
Re: FW: [LF] [TN] SN100 for Reflow Application
Stadem, Richard D.
Wed, 16 Jul 2008 12:51:38 -0500
Re: FW: [LF] [TN] SN100 for Reflow Application
Igoshev, Vladimir
Wed, 16 Jul 2008 15:27:15 -0400
Re: FW: [LF] [TN] SN100 for Reflow Application
Stadem, Richard D.
Wed, 16 Jul 2008 14:44:55 -0500
Re: FW: [LF] [TN] SN100 for Reflow Application
John Burke
Wed, 16 Jul 2008 14:32:04 -0700
Re: FW: [LF] [TN] SN100 for Reflow Application
Igoshev, Vladimir
Wed, 16 Jul 2008 17:43:01 -0400
Re: FW: [LF] [TN] SN100 for Reflow Application
John Burke
Wed, 16 Jul 2008 14:50:19 -0700
Re: FW: [LF] [TN] SN100 for Reflow Application
Kane, Amol (349)
Thu, 17 Jul 2008 15:37:01 -0400
Re: FW: [LF] [TN] SN100 for Reflow Application
Igoshev, Vladimir
Thu, 17 Jul 2008 15:47:17 -0400
New Thread [NTC]: Read this whole thing
Re: [NTC]: Read this whole thing
Dennis Fritz
Fri, 11 Jul 2008 14:27:16 -0400
Re: [NTC]: Read this whole thing
Randy Morrison
Fri, 11 Jul 2008 11:59:11 -0700
Re: [NTC]: Read this whole thing
Whittaker, Dewey (EHCOE)
Fri, 11 Jul 2008 12:02:49 -0700
Re: [NTC]: Read this whole thing
Ted Tontis
Fri, 11 Jul 2008 14:12:02 -0500
Re: [NTC]: Read this whole thing
Joe Fjelstad
Fri, 11 Jul 2008 15:43:22 EDT
New Thread [SMART] REACH consultation
FW: [SMART] REACH consultation
John Burke
Tue, 29 Jul 2008 08:01:58 -0700
Re: FW: [SMART] REACH consultation
R Sedlak
Tue, 29 Jul 2008 14:19:30 -0700

ATOM RSS1 RSS2