(OT) Okay, all you real smart guys......... (1 Message)
(OT)Okay, all you real smart guys......... (2 Messages)
20 X continued (6 Messages)
20X eyepiece (3 Messages)
5% trace width control_RF (3 Messages)
<List>Re: [TN] chocolate plating (3 Messages)
<List>[TN] 5% trace width control_RF (2 Messages)
<List>[TN] Bare-Board Inner-Layer Fab Quality (1 Message)
<List>[TN] Eyelet (2 Messages)
<List>[TN] Sand blasting pcb after copper etching (1 Message)
<No subject> (3 Messages)
Advantage of SAC305 over Sn99.3Cu0.7 (1 Message)
Aluminium Pins with Nickel plated and Tin over NIckel (1 Message)
Antw: [TN] Lead free alloys (1 Message)
Assembly data requirements (5 Messages)
Atmel AT45D041A, Microchip Technology PIC16F876, Fairch ild Semiconductor CD4066BCM (1 Message)
Atmel AT45D041A, Microchip Technology PIC16F876, Fairchild Semiconductor CD4066BCM (2 Messages)
B-24 boards (3 Messages)
bad-boards (1 Message)
Bare-Board Inner-Layer Fab Quality (4 Messages)
BGA Adapter board (3 Messages)
BGA Adpater board (11 Messages)
bga image (9 Messages)
BGA Rework Station Recommendations (9 Messages)
bonding material (9 Messages)
Brain Not Working (1 Message)
Burndy connectors (2 Messages)
Calculation of solder defect rates (1 Message)
Camalot 3700 dispenser (2 Messages)
chocolate plating (15 Messages)
Chris BALL/AuburnHills/VSDS/VALEO is out of the office. (1 Message)
CIT Training locations (3 Messages)
Clean before cleaning (14 Messages)
Clean before cleaning NTC (3 Messages)
Clean before cleaning, changed to clean before cooking (2 Messages)
Cleaning rosin flux residues (15 Messages)
Cleaning test (4 Messages)
Comb Pattern PCB (4 Messages)
Comb Pattern PCB-NTC (1 Message)
Differnt metal then Copper Controlled Impedance Question (1 Message)
Don't Miss Hands On Workshop in Schaumburg on September 22 - 23 (1 Message)
Don't Miss Out on Hands-On Lead Free Workshop in Norcross, GA (1 Message)
Dross survey (1 Message)
Edward Evans is out of the office. (1 Message)
ENIG and press-fit connectors (2 Messages)
ENIG contaminant : Auger analysis recommended ? (12 Messages)
ENIG contaminant : Auger analysis recommended ? - Chemistry Provider (2 Messages)
ENIG contaminant : Auger analysis recommended ? NTC (2 Messages)
ENIG spec conformance , fabs needed , labs as well , thx (1 Message)
ENIG/ Immersion Gold Plating and Pre-baking & Solderability (4 Messages)
ESD Drag Chain Length (12 Messages)
Eyelet (5 Messages)
failure notice (7 Messages)
Flexi Film Annular ring (1 Message)
Friday NTC - RE: [TN] Clean before cleaning (18 Messages)
Fused tin lead plating versus HASL (11 Messages)
FYI ... Lead-free rules hit yields, European packagers, says analyst (5 Messages)
Hard gold plating. (4 Messages)
How to Unsubscribe (2 Messages)
Immersion Ag (4 Messages)
In-Line Cleaning Equipment Suppliers (1 Message)
IPC 4101/99 (5 Messages)
IPC's pull test, shear tests! (3 Messages)
IPC-2221 conductor spacing (4 Messages)
IPC-4553 Document (2 Messages)
IPC-A-610D Training Duration? (5 Messages)
IPC4101B (3 Messages)
J-STD-001 (1 Message)
Landrex Optima 7300 AOI machine (1 Message)
Lead free alloys (1 Message)
Lead free and land patterns (1 Message)
Lead Free pastes, wave solder, and core solders (7 Messages)
lead free PCB Replacement Coatings (7 Messages)
lead free soldering "fillet lifting" (9 Messages)
Lead protrusion of wire terminals (3 Messages)
Looking to buy used 3 GHz network analyzer & 500 MHz 4 channel oscilloscope (1 Message)
Marking product that are extremely high voltage. (2 Messages)
Michael Forrester/NEWYORK/LECROY is out of the office. (1 Message)
Microvia Puzzle (8 Messages)
Mouse Bites (12 Messages)
Mouse Bites (Out of Office) (1 Message)
My "Okie" cross-section...an epilog. (3 Messages)
My Opinion raised vias... Not Solder (2 Messages)
necessary solder paste volume (4 Messages)
Necessity for repeating the EMC test in RoHS (2 Messages)
New Dross Elimination Technology Announced (1 Message)
New, one-day course on the free, industry-developed IPC-1752 Materials Declaration standard (1 Message)
NFC-93-713 Standards (3 Messages)
NTC-IPCWorks2005 (1 Message)
Okay, all you real smart guys......... (49 Messages)
OT Bad Day at Work... (6 Messages)
Out Of The Office (1 Message)
Pink symbol ink... (10 Messages)
Pink symbol ink...(NTC) (3 Messages)
raised vias... (24 Messages)
raised vias...I did a "Okie" cross-section (10 Messages)
Randall L Bock/MSD/US/PBI is out of the office. (2 Messages)
Reflow Oven Selection (1 Message)
Register Now for the RoHS Compliance Webcast Curriculum (1 Message)
Resistor Acne (5 Messages)
Rework for Delaminated PWBs (22 Messages)
Sand blasting pcb after copper etching (8 Messages)
SD Chapter of the IPC DC meeting announcement (1 Message)
Selective Solder Unit (2 Messages)
SNEC Mtg (1 Message)
solder bump height formula (3 Messages)
Solder Protrusions (5 Messages)
Soldering or design problem? (15 Messages)
Standards V- groves PCB (6 Messages)
take me off (6 Messages)
test (1 Message)
unsubscribe (1 Message)
Wanted: Enig Solderability Troubleshooting Help (4 Messages)
washing of misprints and stencils with leaded and lead-f ree (1 Message)
washing of misprints and stencils with leaded and lead-free (7 Messages)
Wastage Ratio (1 Message)
Water Analyse (2 Messages)
Wave solder of ENIG (3 Messages)
What is IPC's recommendation on via holes in terms of plugged or unp... (1 Message)
What is IPC's recommendation on via holes in terms of plugged or unplugged by soldermask ? (2 Messages)
Wires / Straps (2 Messages)
X-ray inspection damaging components... (16 Messages)
X-ray inspection, can it damage devices? (10 Messages)
[OT] RE: [TN] raised vias...I did a "Okie" cross-section (8 Messages)
[OT]...sorta RE: [TN] raised vias...I did a "Okie" cross-section (4 Messages)
[TN] BGA Adpater board (1 Message)
[TN] Marking product that are extremely high voltage. (1 Message)
[TN] X-ray inspection damaging components... (4 Messages)