Thank you I apprciate that
On Thu, Aug 6, 2020 at 11:22 AM Robert Kondner <[log in to unmask]>
wrote:
> Jodi,
>
> You might look at how Type 2 transfers are rated. I took a peek at my
> UL478 docs (old copy) and you are looking at 1000VAC for 60 seconds or
> 1200VAC for 1 sec. I can tell you from experience the duration of the test
> is important. These numbers are for line to safety ground.
>
> I know you want a short quick answer but that just does not apply. You
> need to become well versed in the area and that takes a lot of time and
> readins. You also need some money to buy the specs thought sometime you can
> find illegal copies on line.
>
> Bob K.
>
>
>
> -----Original Message-----
> From: TechNet <[log in to unmask]> On Behalf Of Jodi Sanchez
> Sent: Thursday, August 6, 2020 10:28 AM
> To: [log in to unmask]
> Subject: Re: [TN] Hipot settings
>
> This is a class 2 product ,. Could you suggest a setting . Please see
> attached data sheet for the RJ45
>
> On Thu, Aug 6, 2020 at 10:08 AM Robert Kondner <[log in to unmask]>
> wrote:
>
> > Jodi,
> >
> > There are various standards for different hipot testing specifications.
> > In general we never choose the voltages. We only get to select the
> > standard we must pass.
> >
> > I have tested to 4KV at times.
> >
> > Bob K
> >
> > -----Original Message-----
> > From: TechNet <[log in to unmask]> On Behalf Of Jodi Sanchez
> > Sent: Thursday, August 6, 2020 6:42 AM
> > To: [log in to unmask]
> > Subject: Re: [TN] Hipot settings
> >
> > Good Morning
> > I would like to ask your thoughts about hipot settings and how do you
> > determine what is the best setting for hipot testing. We have some
> > engineers who have me set the test to 500VDC at 100 mOhm for 1 sec.
> > This seems high and excessive to me . This particular cable is an RJ45
> to RJ45.
> > Can I get your thoughts on hipot settings ?
> >
> > Jodi Sanchez
> >
> > On Wed., Aug. 5, 2020, 9:13 p.m. Bhanu Sood, <[log in to unmask]> wrote:
> >
> > > Thanks for the intro Jodi. This is a great forum to pose your
> > > questions, and you shall receive answers, but what is unique about
> > > the forum is the types of responses you will receive. Not everyone
> > > agrees, the views are often divergent (backed by firm conviction in
> > > their POV and decades of experiences).
> > > Welcome!
> > >
> > > On Wed, Aug 5, 2020 at 8:35 PM Jodi Sanchez <[log in to unmask]>
> > wrote:
> > >
> > > > Let me introduce myself. My name is Jodi. I am prototype lead
> > > > engineer
> > .
> > > I
> > > > am also a CIT . I have 15 years experience in cable assembly . We
> > > > do alot of Military and Medical cable assemblies. We have amazing
> > > > capabilities
> > > and
> > > > I love what I do. I am passionate about my work and I must say
> > > > although
> > > it
> > > > is caios sometimes . I enjoy and love what I do. Sometimes we are
> > > > faced with challanges but I have never got a print or job that we
> > > > could not figure out. Everything looks easy on a flat pc of paper.
> > > > Some of the ones that look the easiest turn out to be the hardest
> > > > to build. I would like
> > > to
> > > > learn more as my mind is like a sponge. I want to better myself
> > > > and
> > > better
> > > > my company. Thanks for having me .
> > > >
> > > > Jodi Sanchez
> > > >
> > > > On Wed., Aug. 5, 2020, 4:37 p.m. Douglas Pauls, <
> > > > [log in to unmask]> wrote:
> > > >
> > > > > Scott,
> > > > > We should start a pool on how long it takes before Jodi says
> > > > > "get me
> > > away
> > > > > from these lunatics".
> > > > >
> > > > > *Douglas Pauls *| Principal Materials and Process Engr |
> > > > > Advanced Operations Engineering
> > > > >
> > > > > *COLLINS AEROSPACE*
> > > > >
> > > > > 400 Collins Road NE, MS 108-101, Cedar Rapids, IA 52498 USA
> > > > >
> > > > > *Tel:* +1 319 295 2109 | *Mobile: *+1 319 431 3773
> > > > >
> > > > > [log in to unmask]
> > > > >
> > > > > [log in to unmask] for all Export Compliant
> > > > > Items
> > > > >
> > > > >
> > > > > On Wed, Aug 5, 2020 at 3:24 PM Decker, Scott Collins <
> > > > > [log in to unmask]> wrote:
> > > > >
> > > > > > Hi Jodi,
> > > > > > If you are referring to the TechNet program, too late, you
> > > > > > are in
> > > > it
> > > > > > now.... :-) Welcome!
> > > > > >
> > > > > >
> > > > > > Scott Decker | Senior Engineer, PCB Design Services CID+ |
> > > > > > Electronic Systems Center COLLINS AEROSPACE
> > > > > > 3445 S. 5th Street, Suite 170, Phoenix, AZ 85040 U.S.A.
> > > > > > Tel: 602 308 5957 FAX: 602 243 2347 [log in to unmask]
> > > > > > www.collinsaerospace.com [
> > > > collinsaerospace.com
> > > > > ]
> > > > > > KE7MWT
> > > > > > CONFIDENTIALITY WARNING: This message may contain proprietary
> > > > > > and/or privileged information of Collins Aerospace Systems and
> > > > > > its affiliated companies. If you are
> > > not
> > > > > the
> > > > > > intended recipient please 1) do not disclose, copy, distribute
> > > > > > or use this message or its contents, 2) advise the sender
> > > by
> > > > > > return e-mail, and 3) delete all copies (including all
> > > > > > attachments) from your computer. Your cooperation is greatly
> > > > appreciated.
> > > > > >
> > > > > > -----Original Message-----
> > > > > > From: TechNet [mailto:[log in to unmask]] On Behalf Of Jodi
> > > > > > Sanchez
> > > > > > Sent: Wednesday, August 5, 2020 1:20 PM
> > > > > > To: [log in to unmask]
> > > > > > Subject: [External] [TN] How do I enroll
> > > > > >
> > > > > > Hello
> > > > > > Can you tell me how I can enroll in this program
> > > > > >
> > > > > > --
> > > > > >
> > > > > > Jodi Sanchez
> > > > > >
> > > > > >
> > > > > > *Prototype Lead Engineering Technician*
> > > > > >
> > > > > > *Cable Manufacturing *
> > > > > >
> > > > > > [log in to unmask]
> > > > > >
> > > > > > 860 779.4339
> > > > > >
> > > > > > Dayville CT USA
> > > > > >
> > > > >
> > > >
> > >
> >
> >
>
> --
>
> Jodi Sanchez
>
>
> *Prototype Lead Engineering Technician*
>
> *Cable Manufacturing *
>
> [log in to unmask]
>
> 860 779.4339
>
> Dayville CT USA
>
>
--
Jodi Sanchez
*Prototype Lead Engineering Technician*
*Cable Manufacturing *
[log in to unmask]
860 779.4339
Dayville CT USA
|
