Jon, Can you direct me to the website that has information on this tool? Thank you, Kathie Lucas L-3 Communications 640 North 2200 West Salt Lake City, UT 84116 [log in to unmask] > -----Original Message----- > From: Jon Moore [SMTP:[log in to unmask]] > Sent: Tuesday, November 09, 1999 2:21 PM > To: [log in to unmask] > Subject: Re: [TN] Cutting through an inner trace > > In a message dated 11/4/99 7:08:37 AM US Eastern Standard Time, > [log in to unmask] writes: > > > Hi Matt > > > > Have had excellent success using Dremel tools and some of their > truncated > > cone shape carbide cutters. Most skilled rework/repair operators can > pick > > up this type operation with a minimum of practice. > > The rotary tool that comes with the Pace PRC-2000 repair equipment > actually > has a ground lead that electrically attaches to the trace you want to > drill > down to, and as soon as you touch that trace the motor stops within the > next > 4 revolutions, making it impossible to drill all the way through. It is > very > useful. > > Jon Moore > > ############################################################## > TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c > ############################################################## > To subscribe/unsubscribe, send a message to [log in to unmask] with > following text in > the body: > To subscribe: SUBSCRIBE TECHNET <your full name> > To unsubscribe: SIGNOFF TECHNET > ############################################################## > Please visit IPC web site (http://www.ipc.org/html/forum.htm) for > additional > information. > If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or > 847-509-9700 ext.5365 > ############################################################## ############################################################## TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c ############################################################## To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TECHNET <your full name> To unsubscribe: SIGNOFF TECHNET ############################################################## Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information. If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or 847-509-9700 ext.5365 ##############################################################