~nodding
in acknowledgement~
I know what you mean.
You know what they say though, about people that jump the
gun?
They usually end up getting shot in the ba**s. [censored for
your convenience]
Of course nobody else here would do that, now would
they?
Franklin
I just jumped the gun. I was thinking wave enen
though HASL was right in
front of my face. I guess I have been in front
of the computer too much
today.
(Embedded
image
moved "Franklin" <[log in to unmask]>
to
file: 10/07/99 03:52
PM
pic24408.pcx)
To: "TechNet E-Mail
Forum." <[log in to unmask]>,
"Kenneth Kirby"
<[log in to unmask]>
cc:
(bcc: Kenneth Kirby/ElectrovertUS/Cookson)
Subject:
Re: Re: [TN] HASL-contaminated solder
pot
Kenneth,
Okay you have me curious, so what else
would one run through a HASL solder
pot, other than bare
copper?
Franklin D Asbell
-----Original Message-----
From:
Kenneth Kirby <[log in to unmask]>
To:
[log in to unmask] <[log in to unmask]>
Date: 07 October, 1999
3:19 PM
Subject: Re: [TN] HASL-contaminated solder
pot
Julie,
You must be soldering bare copper/OSP
boards if your getting copper
contamination in your bath. There is not
much you can do about it but the
contamination will build up quicker in small
solder pots as opposed to the
larger (1000 lbs +)pots.
If your not
soldering copper boards then start looking for the person that
is throwing
pennys into the bath. (Yes, I have seen this happen) If you
have any
doubt about the solder your using then you should have it analysed
by someone
other than your vendor.
Ken Kirby
(Embedded
image
moved Julie Dixon <[log in to unmask]>
to
file: 10/07/99 01:59
PM
pic06352.pcx)
To: [log in to unmask]
cc: (bcc:
Kenneth Kirby/ElectrovertUS/Cookson)
Subject: [TN] HASL-contaminated
solder pot
TechNet,
We have sporadic problems with the
copper level rising in our solder pot.
We
reduce the temp and dross each
morning. Could you recommend a specific PM
program to keep our SnPb clean? We
believe per the certicates of analyses
that
our supplier gives us good
product. Any other reasons it might
rise?
Thanks,
Green
##############################################################
TechNet
Mail List provided as a free service by IPC using LISTSERV
1.8c
##############################################################
To
subscribe/unsubscribe, send a message to [log in to unmask] with following
text
in
the body:
To subscribe: SUBSCRIBE TECHNET <your full
name>
To unsubscribe: SIGNOFF
TECHNET
##############################################################
Please
visit IPC web site (http://www.ipc.org/html/forum.htm)
for
additional
information.
If you need assistance - contact Gayatri
Sardeshpande at [log in to unmask]
or
847-509-9700
ext.5365
##############################################################