Steve, What are the problems with trying to wave solder 0402s? Do they fall off the board or result in insufficient fillets or what? Wade Oberle -----Original Message----- From: Stephen R. Gregory [SMTP:[log in to unmask]] Sent: Wednesday, September 01, 1999 7:48 AM To: [log in to unmask] Subject: Re: [TN] Supplier(s) of 0402 caps In a message dated 09/01/1999 6:39:47 AM Central Daylight Time, [log in to unmask] writes: << To all.. Happy Wed., especially if someone can help me... I have a small problem. Does anyone know of a manuf. of .022uf and .1 uf caps in the 0402 package??? O.K., so its not so small a problem, especially since the boards are being fabricated and assembled this week. They will be used in Class 2 dedicated service hardware, as oppossed to Class 1 general products, so I need some good reliability types. After you stop laughting, any and all help will be appreciated. I really don't want to use the 0603s on the secondary side when we spin this design after prototype build/test/intergration. Thanks again. Regards, Bob Vanech BVAN Enterprise >> Mornin' Bob! You might try: http://www.minicaps.com they also make capacitor arrays (something to consider?) One comment, I hope your board is assembled by double-sided reflow...putting 0402's on the bottom and expecting to wave solder them is pretty much a dream... -Steve Gregory- ############################################################## TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c ############################################################## To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TECHNET <your full name> To unsubscribe: SIGNOFF TECHNET ############################################################## Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information. If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or 847-509-9700 ext.5365 ############################################################## ############################################################## TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c ############################################################## To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TECHNET <your full name> To unsubscribe: SIGNOFF TECHNET ############################################################## Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information. If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or 847-509-9700 ext.5365 ##############################################################