Hi William,

Do you mean material that is mislabeled or just an incorrect order?

I would expect to notice a problem when we start handling the stuff.
A more subtle change, which has happened to us, is getting material we
thought was higher quality (lower pits and dents count) that turned out to
be the same old stuff.

Hans

~~~~~~~~
Hans Michel Hinners                             WR-ALC/LYPME Bldg. 640
Materials Engineer                                      380 Second Street,
Suite 104
Manufacturing Eng. Sec.                         Robins AFB GA 31098-1638
912-926-1970 (Voice) 468 - 1970 (DSN)   912-926-7974 (Fax)
[log in to unmask]


> -----Original Message-----
> From: Wang, William (Suzhou Laminate) [SMTP:[log in to unmask]]
> Sent: Sunday, September 12, 1999 09:39
> To:   [log in to unmask]
> Subject:      [TN] PCB use 1 OZ & H OZ copper
>
>     I work for a copper clad laminate company. What will happen if I
> send wrong copper foil thickness laminate to PCB fabricator?
>    1. Customer require 1 OZ on both sides, but I send o.5 OZ on both
> sides
>    2. Customer require 0.5 OZ on both sides, but I send 1 OZ on both
> sides
>    It's just a scenario analysis.
>
> Thanks and best regards
> William
> QA Manager
> ISOLA Laminate Systems Suzhou

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################