Adam,
If your  board is very small and is going to be panelized
you may elect to move components to within 1mm of the edge
if you can provide adequate spacing on the sub panel
for the handling rails of the process equipment and depending
on how you separate the boards on the panel.



Tim Easterling
Cadd Manager Commercial Engineering
SCI Systems Inc.
8600 S. Memorial Parkway MS 200
Huntsville, Al. 35802
(256)882-4426 (ph)
(256)882-4700 x4426 (voicemail)
(256)882-4304 (fx)