Hi there!
> My name is Kathy Hughes.  I am a manufacturing engineer with Borg
> Warner Automotive.  The line I am responsible for is a PCB SMT assembly
> line.  Presently, we are trying to find out if there is a standard (IPC or
> general) that states the amount of rework allowed to be performed on a PCB
> -
> or per square inch or something to that matter.  If you have any
> information
> that could help me get to this industry standard, I would greatly
> appreciate
> it.  I just found this quote from you on the IPC Technet archives from
> about 4
> years ago!
> "Either spec can be used when invoked by customer or contractual
> agreement.
> A-610 may be used as a standalone document for inspection, but keep in
> mind
> that it doesn't specify the frequency of in-process or end-product
> inspection, nor the allowable number of repair/rework defects. These are
> found in -001."
> To sum that up, is that IPC A-001??  How can I find a copy of this, or
> just
> find out the
> "allowable number of repair/rework defects."
> Thanks a lot for your help!  I really appreciate it!
> Sincerely,
> Kathleen Hughes
>
>
> ____________________________________________________
>
> Kathy Hughes
> Borg Warner Automotive
> Manufacturing Engineer
> 406 Gregson Drive
> Cary, NC 27511
> Phone: (919)469-6152
> Fax: (919)469-2911
> Email:  [log in to unmask]
>
> ____________________________________________________
>
>