Hi Bob - We've had fairly good success with the tape type heat transfer materials in applications where we're dealing with two flat surfaces, such as between a DIP body and a thermal frame. The tape type materials can be laid down in long strips which extend under numerous parts. You'll need to be sure that the tape adhesives don't present a problem with compatibility when it comes to fluxes, cleaners and conformal coatings. If the adhesives start to wash out in a cleaning cycle, you can end up with a process residue trap under the tape, or an adhesive ooze on the board that behaves like a contaminant. The tapes haven't the capability to fill gaps and variations, such as are encountered under part bodies which are positioned over insulated vias and similar items. The tapes also don't accomodate the height variations which occur with surface mount components. Regards - Kelly ################################################################ TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c ################################################################ To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TechNet <your full name> To unsubscribe: SIGNOFF TechNet ################################################################ Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information. For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312 ################################################################ ################################################################ TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c ################################################################ To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TechNet <your full name> To unsubscribe: SIGNOFF TechNet ################################################################ Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information. For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312 ################################################################