In a message dated 14/05/99  09:15:24PM, you write:

> Thanks, all, for the responses.  I was wondering if the type 4 paste would
>  have value at pitches below 20 mil, say around 12 or 16.  If all I will get
>  is more oxidation and worse release, does it offer any other advantages
>  besides sharper corners and straighter sides on its deposits?
---------

If you can get consistent print volumes and subsequent good soldering with
type 3 powder then you need only balance the extra expense and greater
performance variation possibilites in very fine powder pastes against the
benefits of a nice looking printed appearance.....
I suggest to resist using them as long as you are able to.


Mike Fenner

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################