EPE became APT (I think) several years ago. Last time I talked with them, they were at the same address years ago. ARIC PARR Sr. Manufacturing Engineer Eaton Corp 1400 S. Livernois P. O. Box 5020 Rochester Hills, Mi 48308-5020 [log in to unmask] 248 608 7780 Fax: 248 656 2242 ------------- Original Text From: C=US/A=INTERNET/DDA=ID/TechNet(a)IPC.ORG, on 5/18/99 12:36 PM: To: Aric Parr@01635@Lectron_RH, EatonWHQ@CorpMail@WHQCleveOH[C=US/A=INTERNET/DDA=ID/TechNet(a)IPC.ORG], Dean Jones@01635@Lectron_RH, Luis Arevalo@Automotive Eng@AACOCarolStrmIL I've got a bunch of titanium pallets in house that I switched from. I can give you some if you don't find the source, I switched to composites and it works alot better. contact me offline. [log in to unmask] on 05/18/99 12:07:16 PM Please respond to [log in to unmask] To: [log in to unmask] cc: (bcc: Jason Smith/Lex/Lexmark) Subject: Re: [TN] : Source for Titanium Picture Frame Pallets Hello, This is my first post, so please be kind. -EPE used to be in Manchester NH. I believe they may still be there. Area code up there is 603 to call 411. -As far as picture frame wave solder fixtures, there are lots of sources. I personally use Insulfab Plastics in Spartanburg SC. 1-800-845-7599. Ask for Lynn Sutton. She handles quotes, etc. Also, consider EMC Global in Doylestown PA, SP Precision in Portland OR area, and TK machine in Waterboro Maine, and lastly Datum Dynamics in Portsmouth RI. They all do nice work. Good Luck, Wendy Casker Manufacturing Engineer Dynamic Details - Massachusetts -----Original Message----- From: Kasprzak, Bill (esd) US <[log in to unmask]> To: [log in to unmask] <[log in to unmask]> Date: Tuesday, May 18, 1999 10:58 AM Subject: [TN] : Source for Titanium Picture Frame Pallets >Fellow Technoids: > >A few years back I had purchased some titanium picture frame wave soldering >pallets from a company called EPE. This pallet had an adjustable center >rail. > >Does anyone know if ..... > >#1A - Is EPE still in business? > >#1B- If so, Where are they located? > >#2 - Does anyone know of a good source for a good quality titanium (or >equivalent) picture frame wave soldering pallets for holding rectangular >circuit boards? > >Thanks, > >Bill Kasprzak >Moog Inc. > >################################################################ >TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c >################################################################ >To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: >To subscribe: SUBSCRIBE TechNet <your full name> >To unsubscribe: SIGNOFF TechNet >################################################################ >Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information. >For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312 >################################################################ > > ################################################################ TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c ################################################################ To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TechNet <your full name> To unsubscribe: SIGNOFF TechNet ################################################################ Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information. For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312 ################################################################ ################################################################ TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c ################################################################ To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TechNet <your full name> To unsubscribe: SIGNOFF TechNet ################################################################ Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information. For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312 ################################################################ ################################################################ TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c ################################################################ To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TechNet <your full name> To unsubscribe: SIGNOFF TechNet ################################################################ Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information. For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312 ################################################################ ################################################################ TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c ################################################################ To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TechNet <your full name> To unsubscribe: SIGNOFF TechNet ################################################################ Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information. For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312 ################################################################