Hi Donn,

What are the criteria you use to determine when a print is a reject ?
What are the type and thickness of the stencil you are using ?
Are the apertures in the stencil the same size as the pads on the board and
what is the smallest aperture ?

Regards, Ahne Oosterhof
A-Laser, Inc.
(503)641-9428

-----Original Message-----
From:   TechNet [mailto:[log in to unmask]] On Behalf Of Don E Steffen
Sent:   Monday, April 05, 1999 11:27 AM
To:     [log in to unmask]
Subject:

     Techneter's

     We are presently implementing Laser Inspection of our solder paste
     operation. We are experiencing a 10% fall out at paste inspection. We
     want to be able to clean these printed wiring boards for reprinting
     with paste. Is there anyone out there that has any experience with
     this cleaning process?  What are you doing to clean the boards in
     order to still meet the cleanliness requirements for ROSE testing?

     Any help you can give me would be appreciated

     Donn Steffen
     VDO-CS/QE

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################