I have a board which has failed shock and vibe testing, due to a SMT component breaking off. I have been told to use an RTV to hold the part on. Could I please get some help. What is an RTV? Who do I get them from? Is there automated ways of applying? I would be more than happy to hear from vendors, but maybe they should respond directly to me. Thanks. Steve Quinn ===== ARTESYN TECHNOLOGIES - Communication Products Group ====== ================================================================ Steve Quinn Email: [log in to unmask] Process Engineer Phone: 608-831-5500 8310 Excelsior Drive Fax: 608-831-0872 Madison, WI 53717 ================================================================= ====== Visit us at http://www.artesyn.com ====== ################################################################ TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c ################################################################ To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TechNet <your full name> To unsubscribe: SIGNOFF TechNet ################################################################ Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information. For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312 ################################################################