[log in to unmask] wrote:

> Gaby,
>
> Sorry about your troubles. I've never run into it with through hole
> devices, but many times with SMT
> types having been reflowed and often needing touched-up because of
> poor solder termination
> solderability.
>
> It sounds and looks (in x-section) like a smilar problem. The fine
> coil wires become detached under
> thermal stress because of dissimilar expansion rates at the attachment
> "legs."
>
> We solved some, not all, problems by changing a supplier once to
> improve solderability. In another
> instance, we more carefully watched our profiles to do everything
> possible to avoid touch-up.
>
> Good luck,
>
> Earl Moon
>
> ################################################################
> TechNet E-Mail Forum provided as a free service by IPC using LISTSERV
> 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in the body:
> To subscribe:   SUBSCRIBE TechNet <your full name>
> To unsubscribe:   SIGNOFF TechNet
> ################################################################
> Please visit IPC's web site (http://www.ipc.org) "On-Line Services"
> section for additional information.
> For technical support contact Hugo Scaramuzza at [log in to unmask] or
> 847-509-9700 ext.312
> ################################################################

 Thanks, Earl!
Gaby

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################